YESWELDER LYG-L600A

YESWELDER LYG-L600A Auto-Darkening Welding Helmet User Manual

Model: LYG-L600A

1. Uvod

Thank you for choosing the YESWELDER LYG-L600A Auto-Darkening Welding Helmet. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your welding helmet. Please read these instructions thoroughly before use and retain them for future reference.

2. Sigurnosne informacije

Welding and cutting processes can be hazardous. Always follow safety precautions to prevent injury. This welding helmet is designed to protect your eyes and face from sparks, spatter, and harmful radiation under normal welding conditions. It is crucial to understand that this helmet alone does not provide complete protection against all hazards.

  • Always wear appropriate safety glasses with side shields under the welding helmet.
  • Ensure the helmet is properly adjusted and fits securely before starting any welding operation.
  • Ne koristite ovu masku za lasersko zavarivanje ili zavarivanje iznad glave.
  • Inspect the helmet and lens regularly for any damage. Replace damaged parts immediately.
  • The helmet provides continuous UV/IR protection up to Shade DIN 16, even in the light state or if the auto-darkening function fails.
  • This product complies with ANSI Z87.1, EN 379, CSA Z94.3, and EN ISO 16321 standards.

3. Proizvod je gotovview i komponente

The YESWELDER LYG-L600A welding helmet features a true color lens, fast auto-darkening response, and a comfortable design for various welding applications.

Ključne karakteristike:

  • True Color View: Enhanced optical clarity (1/1/1/2) for a more natural view zavarivačke lokve.
  • Brzo vrijeme odziva: Auto-darkening in 1/30000 seconds.
  • Adjustable Delay and Sensitivity: Customizable settings for different welding environments.
  • Svestrana primjena: Suitable for MIG, TIG, MMA, and Grind modes.
  • Izdržljiva konstrukcija: Made from high-quality PP material.
  • Solar Powered with Replaceable Battery: Uses solar energy with a replaceable CR2450 lithium battery for backup.
  • Udobna pokrivala za glavu: Lightweight (500g) with a pivot harness for superior comfort and multiple adjustments.

Uključene komponente:

  • YESWELDER LYG-L600A Welding Helmet
  • Auto-Darkening Filter (ADF) Lens
  • Uputstvo za upotrebu
YESWELDER LYG-L600A Welding Helmet with key features listed

Slika 1: Gotovoview of the YESWELDER LYG-L600A Welding Helmet highlighting its advantages.

Welding helmet showing various applications like Grind, Stick, MIG, and TIG welding

Figure 2: The helmet is suitable for multiple welding processes and grinding.

4. Podešavanje

4.1 Podešavanje naglavnog pribora

The headgear is designed for optimal comfort and fit. Adjust the following to ensure proper positioning:

  • Tightness Knob: Rotate the knob at the back of the headgear to adjust the circumference for a snug fit.
  • Top Strap: Podesite gornji remen kako biste kacigu pravilno postavili na glavu, osiguravajući viewPodručje za gledanje je u visini očiju.
  • Podešavanje ugla: Use the side knobs to set the desired angle of the helmet when in the down position.
  • Podešavanje udaljenosti: Adjust the distance between the helmet and your face for optimal viewing i udobnost.
Diagram showing various adjustment points on the welding helmet's headgear, including tightness, top strap, angle, and distance adjustments.

Figure 3: Headgear adjustment points for a comfortable and secure fit.

4.2 Ugradnja/zamjena baterije

The helmet is primarily solar-powered but uses a replaceable CR2450 lithium battery as a backup. A low battery indicator will illuminate when approximately 2-3 days of battery life remain.

  1. Locate the battery compartment on the auto-darkening filter (ADF) lens.
  2. Rotate the cover to open the compartment.
  3. Remove the old CR2450 battery (if replacing).
  4. Umetnite novu CR2450 litijumsku bateriju sa pozitivnom (+) stranom okrenutom prema gore.
  5. Close the cover by rotating it until it clicks into place.
Close-up of the auto-darkening filter showing the test button, sensitivity and delay knobs, and the battery compartment with a low battery indicator.

Figure 4: Battery compartment and test button on the ADF lens.

Image showing a CR2450 lithium battery and the auto-darkening lens with an arrow indicating where a corrective lens can be inserted.

Figure 5: CR2450 battery and corrective lens slot.

5. Uputstvo za upotrebu

5.1 Uključivanje/isključivanje napajanja

The helmet features automatic power on/off. It activates when exposed to light and deactivates after a period of inactivity to conserve battery life.

5.2 Testno dugme

Prije svake upotrebe, pritisnite TEST button on the ADF lens to verify its proper functioning. The lens should momentarily darken and then return to its clear state. If it does not darken, check the battery or consult the troubleshooting section.

5.3 Shade, Sensitivity, and Delay Adjustments

The helmet offers adjustable settings to optimize performance for different welding tasks.

  • Shade Control (DIN 4/9-13): Use the external knob to select the appropriate shade level (DIN 9-13) for your welding process. The helmet also has a light state of DIN 4 for grinding.
  • Kontrola osjetljivosti: Adjust the sensitivity knob to control how easily the lens reacts to welding arc light. Higher sensitivity is suitable for low amperage TIG welding, while lower sensitivity helps prevent false triggering from ambient light.
  • Kontrola kašnjenja: Adjust the delay knob to set the time the lens remains dark after the welding arc stops. A shorter delay (0.1s) is suitable for tack welding, while a longer delay (0.8s) is better for high ampopasno zavarivanje radi zaštite od naknadnog sjaja.
Three panels showing adjustments for Delay, Shade (Teinte), and Sensitivity on the auto-darkening filter.

Figure 6: Controls for Delay, Shade, and Sensitivity.

5.4 Grinding Mode

To activate grinding mode, set the shade control to DIN 4. In this mode, the auto-darkening function is deactivated, and the lens remains clear, providing protection against impacts while grinding. Always ensure the helmet is in the correct mode before starting any operation.

Four panels illustrating Grind Mode, Stick Mode, MIG Mode, and TIG Mode with corresponding welding helmet views.

Figure 7: Different operating modes of the welding helmet.

6. Održavanje

6.1 Cleaning the Helmet

  • Očistite školjku kacige blagim rastvorom sapuna i vode. Izbjegavajte jake rastvarače.
  • Wipe the auto-darkening filter (ADF) lens and cover lenses with a soft, clean cloth. Do not use abrasive materials or cleaning solutions containing alcohol or ammonia, as these can damage the lens coatings.
  • Regularly check and clean the sensors on the ADF lens to ensure proper function.

6.2 Replacing Cover Lenses

The helmet uses outer and inner cover lenses to protect the ADF lens from scratches and spatter. Replace these lenses when they become scratched, pitted, or too dirty to clean effectively.

  1. Carefully remove the retaining frame or clips holding the cover lens in place.
  2. Remove the old cover lens.
  3. Insert a new, clean cover lens, ensuring it is properly seated.
  4. Reattach the retaining frame or clips.

7. Otkrivanje problema

Problem Mogući uzrok Rješenje
Sočivo se ne zatamnjuje prilikom zavarivanja.
  • Niska baterija.
  • Sensors are dirty or obstructed.
  • Nepravilno podešavanje osjetljivosti.
  • Helmet not positioned correctly.
  • Zamijenite CR2450 bateriju.
  • Clean sensors.
  • Povećajte osjetljivost.
  • Adjust headgear for proper sensor alignment with arc.
Poor visibility or blurry view.
  • Cover lenses are dirty or scratched.
  • ADF lens is damaged.
  • Očistite ili zamijenite zaštitne leće.
  • Replace ADF lens if damaged.
Sočivo povremeno treperi ili se zatamnjuje.
  • Niska baterija.
  • Sensors are partially obstructed.
  • Sensitivity set too high for ambient light.
  • Zamijenite CR2450 bateriju.
  • Clean sensors.
  • Decrease sensitivity.

8. Specifikacije

Feature Specifikacija
Model LYG-L600A
Viewing area 92.5 x 42.5 mm
Optical Class 1/1/1/2 (True Color)
Light State Shade DIN 4
Tamna nijansa stanja DIN 9-13 (Podesivo)
UV/IR zaštita DIN 16 (Permanent)
Vrijeme prebacivanja 1 / 30,000s
Vrijeme kašnjenja 0.1 - 0.8 s (Adjustable)
Osjetljivost Podesivo
Senzori luka 2
Napajanje Solar Cell & Replaceable Lithium Battery (CR2450)
Materijal High-Quality PP
Težina 500 g
Radna temperatura Refer to product packaging for specific range.
Standardi ANSI Z87.1, EN 379, CSA Z94.3, EN ISO 16321

9. Garancija i podrška

For warranty information and technical support, please refer to the warranty card included with your product or visit the official YESWELDER webSačuvajte račun kao dokaz o kupovini.

Kontakt informacije: Molimo posjetite www.yeswelder.com za najnovije resurse podrške i kontakt podatke.

© 2024 YESWELDER. Sva prava pridržana.