Godox FT433C TTL Wireless Flash Trigger Instruction Manual

Uvod

This manual provides detailed instructions for the safe and effective use of your Godox FT433C TTL Wireless Flash Trigger. Please read this manual thoroughly before use to ensure proper operation and to prevent damage to the product or injury to yourself or others. Keep this manual for future reference.

Šta je u kutiji

Provjerite da li se sve stavke nalaze u vašem paketu:

• 1 x Wireless Flash Trigger (FT433C)
• 1 x Receiver (FR433)
• 1 x Uputstvo za upotrebu
• 1 x Par rukavica
• 1 x Lens Brush
• 1 x krpa za čišćenje

Image: The Godox FT433C Wireless Flash Trigger and its accompanying FR433 Receiver.

Setup

1. Instalacija baterije

The FT433C Wireless Flash Trigger requires two AA batteries (not included).

1. Pronađite poklopac odjeljka za bateriju na stražnjoj strani okidača.
2. Pomaknite poklopac prema dolje da biste ga otvorili.
3. Umetnite dvije AA baterije, pazeći na ispravan polaritet (+/-).
4. Čvrsto zatvorite poklopac odeljka za baterije.

slika: View of the open battery compartment on the Godox FT433C, showing slots for two AA batteries.

2. Attaching the Trigger to Your Camera

Slide the FT433C trigger onto your camera's hot shoe mount until it clicks into place. Secure it by tightening the locking mechanism if available.

3. Connecting the Receiver to a Flash Unit

The FR433 Receiver connects to compatible flash units. Insert the receiver into the flash unit's sync port or hot shoe, depending on the flash model.

Uputstvo za upotrebu

1. Uključivanje/isključivanje

Press and hold the power button on the FT433C trigger to turn it on or off. The LCD screen will illuminate upon power-on.

2. Osnovne kontrole i prikaz

The FT433C features a large LCD panel for clear display of settings, along with various buttons for navigation and adjustment:

• Group Buttons (GR): Select flash groups (A, B, C, D, E).
• Funkcijska dugmad: Access specific settings displayed on the LCD.
• Dial/Set Button: Navigacija kroz menije i potvrđivanje odabira.
• Dugme SYNC: Adjust sync modes.
• Dugme ZOOM: Adjust flash zoom settings.
• Dugme MODE: Switch between TTL, Manual, and Multi-flash modes.

Image: The Godox FT433C's LCD screen displaying settings for High-Speed Sync (HSS) and TTL Auto Flash modes.

3. Flash Modes (TTL, Manual, Multi-flash)

Pritisnite MODE dugme za ciklično prebacivanje između dostupnih režima blica:

• TTL automatski blic: Automatski podešava snagu blica za ispravnu ekspoziciju.
• Ručni blic: Omogućava ručnu kontrolu nad snagom blica.
• Multi-flash: Ispaljuje niz brzih bljeskova za stroboskopski efekat.

4. Brza sinhronizacija (HSS)

The FT433C supports High-Speed Sync up to 1/8000s, allowing you to use flash with fast shutter speeds. This feature is automatically enabled or can be selected via the SYNC button, depending on camera and flash compatibility.

5. Kompenzacija ekspozicije blica (FEC)

Adjust flash exposure compensation from ±3 EV in 1/3 EV increments to fine-tune flash brightness.

6. Zoom Setting

The trigger supports Auto/24-200mm zoom settings, which can be adjusted via the ZOOM button.

7. Wireless Control (433MHz, Groups, Channels, ID)

The FT433C operates on a 433MHz frequency for stable wireless communication. It supports 5 or 16 groups and 32 channels. Use the 1-99 wireless ID settings to prevent interference from other systems.

Image: The Godox FT433C trigger on a camera wirelessly communicating with an FR433 receiver attached to a Godox AD200Pro II flash unit.

8. APP Flexible Control

Control the FT433C trigger wirelessly using the Godox Flash app on your smartphone (iOS or Android). This allows remote adjustment of flash mode, power levels, modeling lamp, and beeper settings.

Image: A smartphone displaying the Godox Flash app interface, used to wirelessly control the FT433C trigger mounted on a camera.

9. TCM Switch (TTL to Manual Conversion)

The TCM function allows a one-click conversion from TTL mode parameters to Manual settings. This streamlines workflow by automatically transferring TTL output values to manual power levels, eliminating repetitive manual adjustments.

Image: The Godox FT433C's LCD screen showing the TCM (TTL to Manual) function in action, converting TTL settings to manual power levels.

10. Single-Contact, Rapid-Fire

The single-contact mode of the FT433C ensures faster continuous shooting by minimizing data exchange between the trigger and camera. This mode is ideal for rapid-fire photography scenarios.

Image: The Godox FT433C trigger mounted on a camera, illustrating its single-contact design for rapid-fire photography.

Održavanje

• Uređaj držite suhim. Ne rukujte mokrim rukama niti ga uranjajte u vodu.
• Use a soft, dry cloth to clean the unit. Avoid harsh chemicals or abrasive cleaners.
• Uklonite baterije ako se uređaj neće koristiti duži period.
• Čuvati na hladnom i suvom mestu dalje od direktne sunčeve svetlosti i ekstremnih temperatura.
• Nadogradnja firmvera: The device supports firmware upgrades through its USB-C port. Visit the official Godox webstranica za najnoviji firmver i upute.

Rješavanje problema

1. Signal Stability

The FT433C utilizes the 433MHz frequency band to ensure signal stability. If you experience signal issues, ensure:

• The trigger and receiver are within the effective transmission range (approx. 0-100M).
• There are no major obstructions between the trigger and receiver.
• Wireless ID settings are correctly configured to avoid interference.

Image: Two photographers using Godox flash triggers and lighting equipment in a studio, demonstrating the use of wireless flash control for stable signal transmission.

2. Flash Not Firing

• Check if the trigger and receiver are powered on and have sufficient battery.
• Ensure the trigger is securely mounted on the camera's hot shoe.
• Verify that the receiver is properly connected to the flash unit.
• Confirm that the channel and group settings on both the trigger and receiver match.
• Check camera compatibility. The FT433C is compatible with Canon R8, R6, R5, R3, R, M6, 850D, 800D/T7i, 760D/T6s, 750D/T6i, 650D, 600D, 7D Mark II, 7D, 6D Mark II, 6D, 5D Mark IV/III/II, 1D Mark III, 1DX, 550D, 500D, 450D, 90D, 80D, 70D, 60D, 50D, 1100D, 77D, SL3/250D, T7/1500D, 2000D, T100/3000D, 4000D. Note: Not compatible with Canon RP R50.

Specifikacije

Garancija i podrška

Za informacije o garanciji i tehničkoj podršci, molimo pogledajte garantni list koji dolazi uz vaš proizvod ili posjetite službenu Godox web stranicu. webSačuvajte račun kao dokaz o kupovini za reklamacije u slučaju reklamacije.