Avisontek Universal Wireless Garage Door Keypad Remote & Keychain Remote (Models 878MAX & 893MAX) Instruction Manual

1. Proizvod je gotovview

The Avisontek Universal Wireless Garage Door Keypad Remote (878MAX) and Keychain Remote (893MAX) provide convenient and secure access to your garage. Designed for wide compatibility, these devices feature advanced security protocols and durable construction for reliable performance.

Ključne karakteristike:

• Široka kompatibilnost: Works with LiftMaster, Chamberlain, and Craftsman garage door openers manufactured from 1993 to present, featuring Purple, Yellow, Red, Orange, or Green learn buttons. Not compatible with Dip Switch openers.
• Poboljšana sigurnost: Utilizes Security+ 2.0 rolling code technology for superior anti-theft protection.
• Izdržljiv i otporan na vremenske uvjete: Constructed with ABS alloy material, designed to withstand various weather conditions including sun, snow, and rain.
• Dizajn prilagođen korisniku: Easy installation without complex wiring, temporary password function for guests, and a night light for visibility.
• Prošireni raspon: Offers a control range of up to 164 feet.

Figure 1: Avisontek 878MAX Wireless Keypad and 893MAX Keychain Remote.

2. Podešavanje i programiranje

Follow these steps to program your Avisontek wireless keypad and keychain remote to your garage door opener.

2.1. Provjera kompatibilnosti

Before programming, identify the color of the learn button on your garage door opener motor unit. This product is compatible with LiftMaster, Chamberlain, and Craftsman openers with Purple, Yellow, Red, Orange, or Green learn buttons (manufactured 1993-Present). It does not support Dip Switch openers.

Figure 2: Compatibility chart showing supported learn button colors and corresponding years for LiftMaster, Chamberlain, and Sears Craftsman garage door openers.

2.2. Keypad (878MAX) Programming

To program the wireless keypad:

1. Pripremite: Locate the learn button on your garage door opener motor unit. Note that the appearance of the learn button may vary (Green, Red/Orange, Purple, Yellow).
2. Program Initial PIN:
   1. Press and hold the '*' and '#' buttons simultaneously until the lights on the keypad stop blinking.
   2. Enter a 4-digit personal identification number (PIN) of your choice, then press the '#' button.
   3. Press and release the Enter button the number of times that corresponds with your garage door opener type (based on learn button color):
      • 1 Press: 310 MHz Security+ (Purple Learn Button)
      • 2 Presses: 390 MHz Security+ (Red/Orange Learn Button)
      • 3 Presses: 390 MHz Billion Code (Green Learn Button)
      • 4 Presses: 315 MHz Security+ 2.0 (Yellow Learn Button)
   4. To exit programming mode, press the '0' button.
3. Garage Door Opener Learning:
   1. Press and release the Learn button on the garage door opener. The Learn LED will light within 30 seconds.
   2. Enter the 4-digit PIN you set (step 2.b), then press the ENTER button. The garage door opener lights will flash or two clicks will be heard.
   3. To test, press the PIN, then press the ENTER button. The garage door will activate.
4. Programming Multiple Doors: To program the Keyless Entry to more than one garage door opener, repeat the steps above using a NEW PIN for each additional garage door opener.
5. Privremeni pristup: For guest access, enter the PIN, then press the ENTER button. The door opener will activate the keypad for 20 seconds. During this time, pressing the ENTER button again will stop or reverse the door.

Figure 3: Visual guide for programming the Avisontek 878MAX wireless keypad.

2.3. Keychain Remote (893MAX) Programming

To program the keychain remote:

1. Identify Learn Button Color: Locate the learn button on your garage door opener motor unit.
2. Programming Initiation: Press and hold buttons C and D on the keychain remote until the LED stays on.
3. Choose Code Type: Press the button you want to program (A, B, C, or D) 1-4 times according to the color of your garage door opener's learn button:
   • Yellow Learn Button: Press 1 time
   • Purple Learn Button: Press 2 times
   • Orange/Red Learn Button: Press 3 times
   • Green Learn Button: Press 4 times
4. potvrdi: Press any button on the remote (except the one chosen in step 3) to confirm. The LED will turn off.
5. Garage Door Opener Learning: Press the learn button on the back of the opener. After the learn LED glows steadily, press and hold the remote button you chose in step 3 until the opener lights flash or two clicks are heard. The remote is now programmed.

Figure 4: Visual guide for programming the Avisontek 893MAX keychain remote.

3. Uputstvo za upotrebu

Once programmed, operating your Avisontek garage door access devices is straightforward.

3.1. Using the Keypad (878MAX)

• Otvaranje/Zatvaranje: Enter your 4-digit PIN, then press the ENTER button. The garage door will activate.
• Stopping/Reversing: If the door is in motion, entering your PIN and pressing ENTER again within 20 seconds will stop or reverse the door.
• noćno svjetlo: The keypad features a built-in night light for easy visibility in low-light conditions.
• Privremene lozinke: You can set temporary passwords for guests or service personnel. Refer to the programming section for details.

3.2. Using the Keychain Remote (893MAX)

• Otvaranje/Zatvaranje: Press the programmed button (A, B, C, or D) on the remote. The garage door will activate.
• Stopping/Reversing: Press the programmed button again while the door is in motion to stop or reverse it.
• Više vrata: If you have programmed multiple garage doors, each button can control a different door.

4. Održavanje

Regular maintenance ensures the longevity and optimal performance of your Avisontek devices.

4.1. Zamjena baterije

• Keypad (878MAX): The keypad uses a 9V Alkaline battery. When the keypad lights dim or fail to illuminate, replace the battery. To replace, slide open the battery compartment cover located at the bottom of the keypad.
• Keychain Remote (893MAX): The keychain remote uses a 3V CR2032 Lithium battery. When the remote's LED indicator light becomes dim or the range decreases, replace the battery. To replace, carefully open the remote casing (often by unscrewing small screws or prying gently) and replace the coin cell battery.

Figure 5: Illustration of battery types and locations for the keypad (9V) and keychain remote (CR2032).

4.2. Čišćenje

Obrišite uređaje mekom krpomamp tkanina. Izbjegavajte korištenje jakih kemikalija ili abrazivnih sredstava za čišćenje.

5. Otkrivanje problema

If you encounter issues with your Avisontek garage door access system, consider the following:

• Uređaj ne reagira:
  • Check batteries in both the keypad and remote. Replace if necessary.
  • Ensure you are within the 164ft operating range of your garage door opener.
  • Verify that the device is correctly programmed to your garage door opener. Re-attempt programming if unsure.
• Teškoće s programiranjem:
  • Confirm the learn button color on your garage door opener and ensure it is compatible.
  • Follow the programming steps precisely, paying attention to the number of presses for code type selection.
  • Ensure the garage door opener's learn LED is lit when attempting to pair.
• smetnje: Strong radio frequency interference from other devices might affect performance. Try operating the device from a different location or checking for nearby sources of interference.

6. Specifikacije

Figure 6: Detailed specifications and dimensions for both the 878MAX keypad and 893MAX keychain remote.

7. Garancija i podrška

Avisontek provides comprehensive support for its products.

• garancija: A 3-year warranty is provided, offering no-condition return or exchange.
• Korisnička podrška: For any queries or assistance, please contact Avisontek through their store homepage's "Ask a question" feature or via support email. Responses are typically provided within 24 hours.

Figure 7: Avisontek customer support and warranty details.