TIMEMORE Sculptor 078S Uputstvo za upotrebu električnog mlina za kafu

1. Uvod

Thank you for choosing the TIMEMORE Sculptor 078S Electric Coffee Grinder. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new coffee grinder. The Sculptor 078S is designed for precision grinding, suitable for a wide range of brewing methods from fine espresso to coarse French Press.

2. Značajke proizvoda

• Patentirani ravni žrvnji: The TIMEMORE 078S features patented flat burrs engineered for fine grinding, making it perfect for espresso. These burrs also deliver high uniformity, which is ideal for pour-over brewing.
• Patentirani rotacijski kucač: Designed to effectively clean residual coffee fines from the grinder's spout. A quick turn of the knocker shakes off most fines, ensuring a clean and fresh grind every time.
• Senzorni motor bez četkica: Equipped with a zero-friction motor, PID control, and Hall elements for smoother, quieter operation, longer lifespan, and greater stability. This motor design prevents shaking during use, providing a more precise grind.
• Kontejner za magnetno poravnanje: The magnetic lid ensures a snug fit over the bean entrance. The container automatically aligns to the center smoothly and accurately on the base for a seamless workflow.
• Dizajn magnetne bačve za barut: The powder barrel of the Sculptor 078S coffee bean grinder utilizes a magnetic design, allowing it to return to the position just below the powder outlet smoothly and accurately.
• Adjustable 800-1400 RPM: Fine-tune your brew and achieve your desired flavor with adjustable RPM settings. Different revolutions allow for various grinding styles to suit your preferences.

3. Podešavanje

3.1 Raspakivanje i postavljanje

• Pažljivo izvadite sve komponente iz pakovanja.
• Postavite brusilicu na stabilnu, ravnu i suhu površinu. Osigurajte dovoljno prostora oko uređaja za ventilaciju i rad.
• Connect the power cord to the grinder's port at the rear of the base, then plug it into a 120 Volt AC power outlet.

3.2 Početno čišćenje

• Prije prve upotrebe, obrišite vanjski dio mlinca čistim sredstvom.amp tkanina.
• Ensure the bean hopper and powder barrel are clean and dry.

4. Uputstvo za upotrebu

4.1 Podešavanje mljevenja

The Sculptor 078S features a stepless coarseness adjustment dial on the front. Rotate the dial to select your desired grind size. Lower numbers correspond to finer grinds (e.g., espresso), while higher numbers indicate coarser grinds (e.g., French Press).

slika: Adjustable grind size dial on the TIMEMORE Sculptor 078S. The dial allows for precise selection of grind coarseness, with markings for various brewing methods like Espresso, Pour-over, and French Press.

4.2 RPM Adjustment

The RPM adjustment knob is located at the rear of the grinder's base. This allows you to select a motor speed between 800 and 1400 RPM, influencing the grinding style and flavor profile.

4.3 Proces mljevenja

1. Ensure the powder barrel is magnetically aligned beneath the grind chute.
2. Open the magnetic lid of the bean hopper and add your desired amount of coffee beans.
3. Close the magnetic lid.
4. Press the power button to start grinding. The grinder will automatically stop after a set duration or when beans are fully ground.
5. After grinding, turn the Rotary Knocker (located below the grind adjustment dial) a few times to dislodge any remaining fines.

slika: The patented rotary knocker in action, designed to remove residual coffee grounds and keep the grinder clean.

4.4 Preporučena podešavanja

Experiment with grind settings and RPM to find your preferred taste. General guidelines:

• Espresso: Finer grind settings (e.g., 1-4 on the dial).
• Prelijte preko: Medium grind settings (e.g., 8-13 on the dial).
• French Press/Cold Brew: Coarser grind settings (e.g., 14+ on the dial).

5. Održavanje

5.1 Redovno čišćenje

• After each use, operate the rotary knocker to clear residual fines.
• Obrišite vanjski dio mlinca mekom,amp krpom. Ne koristite abrazivna sredstva za čišćenje niti uranjajte uređaj u vodu.
• Clean the bean hopper and powder barrel regularly with a brush or damp tkanina. Uvjerite se da su potpuno suhi prije ponovnog sastavljanja.

5.2 Burr Cleaning

For deeper cleaning, the burrs can be accessed by carefully unscrewing the front adjustment dial. Refer to the detailed instructions in the full user manual or official TIMEMORE support videos for proper disassembly and reassembly. Note: Improper disassembly may void your warranty.

6. Otkrivanje problema

• Grinder Not Starting: Ensure the power cord is securely plugged into both the grinder and the wall outlet. Check if the power button is pressed.
• Beans Not Feeding: Some coffee beans, especially oily or very light roasts, may stick in the hopper. Gently tap the side of the grinder or use a small brush to encourage beans to feed. Ensure the hopper is not overfilled.
• Nedosljedno mljevenje: Ensure the burrs are clean and free of old coffee residue. Verify that the grind adjustment dial is set correctly and has not shifted.
• Excessive Fines: Utilize the patented rotary knocker after each grind to minimize fines retention.

7. Specifikacije

slika: A detailed comparison table outlining the specifications of different TIMEMORE Sculptor models, including burr types (Turbo and Flat), voltage, power, RPM range, and dimensions.

8. Jamstvo i podrška

TIMEMORE products are designed for quality and durability. For warranty information, please refer to the documentation included with your product or visit the official TIMEMORE website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact TIMEMORE customer service or the seller directly.

• Planovi zaštite: Optional 3-Year and 4-Year Protection Plans are available for purchase. Please check with your retailer for details.
• Politika povrata: A 30-day refund/replacement policy is typically offered. Please verify with your point of purchase.