upHere UP1 Series (B0D8VS42T8)

upHere UP1 Series CPU Air Cooler Instruction Manual

Model: UP1 Series (B0D8VS42T8)

1. Proizvod je gotovview

The upHere UP1 Series CPU Air Cooler is designed to provide efficient cooling for your CPU. It features four 6mm copper heat pipes and a 120mm PWM fan, ensuring optimal thermal performance while maintaining quiet operation. This cooler is compatible with a wide range of Intel and AMD sockets, offering broad applicability for various PC builds.

Ključne karakteristike:

  • Univerzalna kompatibilnost: Supports Intel LGA 1851/1700/1150/1155/1156/1200/1121/1366/1356/2011/2066 (X79/X99) and AMD AM5/AM4/AM3/AM2/FM2/FM1 series sockets.
  • Izuzetne performanse hlađenja: Features four 6mm heat pipes for efficient heat dissipation and a direct heat pipe contact area of 25mm.
  • tihi rad: Equipped with a 120mm fan operating at a maximum speed of 1650rpm ±10%, delivering 68.2CFM airflow with noise levels below 26dB(A).
  • Easy Installation & RAM Clearance: Designed for non-disassembly fan installation and provides clearance for tall RAM modules.
  • Versatile Power Connectivity: Utilizes a 4-pin power port and operates at 12V.

2. Sadržaj paketa

Molimo Vas da provjerite da li su sve komponente prisutne prije nego što nastavite s instalacijom:

  • upHere UP1 Series CPU Air Cooler (Heatsink with 120mm Fan)
  • Intel Mounting Kit (Backplate, brackets, screws)
  • AMD Mounting Kit (Brackets, screws)
  • Termalna pasta
  • Thermal Paste Spatula
  • Uputstvo za upotrebu

3. Vodič za instalaciju

Follow these steps carefully to install your upHere UP1 Series CPU Air Cooler. Ensure your system is powered off and unplugged before beginning.

3.1. Pripremite matičnu ploču

Depending on your CPU socket type (Intel or AMD), select the appropriate mounting hardware.

video: Installation for upHere UP1 Series CPU Air Cooler. This video demonstrates the step-by-step process for installing the cooler on both Intel and AMD platforms, including backplate setup, bracket attachment, thermal paste application, and cooler mounting.

For Intel Sockets (LGA 1851/1700/1150/1155/1156/1200/1121/1366/1356/2011/2066):

  1. Attach the universal backplate to the rear of the motherboard, aligning the holes with the CPU socket. Adjust the backplate clips for your specific socket type (e.g., 115X/1200, 1700, 1366).
  2. Secure the Intel mounting brackets to the front of the motherboard using the provided screws. Tighten them evenly.

For AMD Sockets (AM5/AM4/AM3/AM2/FM2/FM1):

  1. Remove the existing plastic retention modules from the motherboard, but retain the original AMD backplate.
  2. Install the AMD mounting brackets onto the motherboard, aligning them with the backplate screw holes. Secure them with the provided screws.

3.2. Nanesite termalnu pastu

Apply a small amount of thermal paste (pea-sized dot) to the center of your CPU's integrated heat spreader (IHS). Use the provided spatula to spread it evenly into a thin layer across the entire surface of the IHS.

Close-up of the CPU cooler's copper heat pipes making direct contact with a surface.

slika: The cooler features four pure copper direct contact heat pipes designed to efficiently transfer heat from the CPU.

3.3. Montirajte hladnjak procesora

  1. Remove the protective film from the cooler's base.
  2. Carefully place the CPU cooler onto the CPU, aligning the mounting holes on the cooler with the standoffs or brackets on the motherboard.
  3. Using a screwdriver, tighten the screws on the cooler in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until snug. Do not overtighten.
A screwdriver being used to install the CPU cooler onto a motherboard, showing the easy installation process from above.

slika: The cooler is designed for easy installation from above, without needing to remove the fan.

3.4. Connect the Fan Cable

Locate the 4-pin CPU fan header on your motherboard (usually labeled 'CPU_FAN' or similar). Connect the cooler's 4-pin PWM cable to this header.

Close-up of the CPU cooler installed in a PC case, showing the 4-pin power connector.

slika: The 4-pin power connector ensures compatibility with various motherboard configurations.

4. Uputstvo za upotrebu

Once installed, the upHere UP1 Series CPU Air Cooler operates automatically based on your motherboard's fan control settings. The 4-pin PWM connection allows the motherboard to dynamically adjust the fan speed according to CPU temperature, optimizing for both cooling performance and noise levels.

Fan Speed and Noise:

  • The 120mm fan operates within a speed range of 600-1650 RPM ±10%.
  • At maximum speed, the fan delivers an airflow of 68.2 CFM.
  • Noise levels are kept below 26 dB(A) for quiet operation.
Diagram showing the performance specifications of the PWM fan, including noise level, speed, and airflow.

slika: Performance specifications of the PWM fan, highlighting quiet and efficient cooling.

5. Održavanje

Redovno održavanje osigurava optimalne performanse i dugotrajnost vašeg CPU hladnjaka.

  • Uklanjanje prašine: Povremeno čistite rebra hladnjaka i lopatice ventilatora kako biste spriječili nakupljanje prašine, koja može ometati protok zraka i smanjiti efikasnost hlađenja. Koristite komprimirani zrak ili meku četku.
  • Termalna pasta: Reapply thermal paste if you remove the cooler for any reason, or if you notice a significant increase in CPU temperatures over time.
  • Inspekcija ventilatora: Check the fan for any unusual noises or wobbling. If the fan is damaged or excessively noisy, consider replacing it.

6. Otkrivanje problema

If you encounter issues with your CPU cooler, refer to the following common troubleshooting steps:

  • Ventilator se ne okreće: Ensure the 4-pin PWM cable is securely connected to the CPU_FAN header on the motherboard. Check BIOS/UEFI settings to confirm fan control is enabled and configured correctly.
  • Visoke temperature CPU-a: Verify that the cooler is properly seated on the CPU and that the mounting screws are tightened evenly. Ensure sufficient thermal paste was applied. Check for adequate airflow within your PC case.
  • Pretjerana buka: Confirm that the fan blades are free from obstructions. Check if the fan is securely mounted and not vibrating against other components. Adjust fan speed settings in BIOS/UEFI if necessary.
  • Problemi s kompatibilnošću: Double-check that your motherboard socket is listed as compatible with this cooler.

If problems persist, contact upHere customer support for further assistance.

7. Specifikacije

Detailed technical specifications for the upHere UP1 Series CPU Air Cooler:

Dimenzije proizvoda130 mm x 73 mm x 155 mm
Heatpipe4 x Φ6mm Copper Heat Pipes
Brzina ventilatora600-1650 o/min ±10%
Kapacitet protoka zraka68.2 CFM
Nivo buke26 dB(A) (maks.)
Bearing TypeHydro Bearing
Fan Connector Type4-Pin PWM
Voltage12 volti (DC)
Wattage1.45 Watts
Metoda hlađenjaVazduh
MaterijalAluminij (hladnjak)
Diagram showing the technical specifications and dimensions of the CPU cooler.

slika: Detailed technical specifications and physical dimensions of the cooler.

8. Garancija i podrška

upHere products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official upHere webstranice ili kontaktirajte njihov odjel za korisničku podršku.

Molimo sačuvajte svoj dokaz o kupovini za zahtjeve u vezi s garancijom.