ErGear električni sto za stajanje - uputstvo za upotrebu

Uvod

Thank you for choosing the ErGear Electric Standing Desk. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your desk. Please read this manual thoroughly before installation and use, and retain it for future reference.

The ErGear Electric Standing Desk, 63x28 inch, in a white finish, featuring a spacious desktop and electric height adjustment capabilities.

Sigurnosne informacije

• Prije sastavljanja provjerite jesu li sve komponente prisutne i neoštećene. Ne koristite ako bilo koji dio nedostaje ili je neispravan.
• Držite djecu i kućne ljubimce dalje od stola tokom rada kako biste spriječili povrede.
• Ne preopterećujte sto. Maksimalna preporučena težina je 80 kg.
• Ensure the power cord is not pinched or damaged. Connect to a grounded outlet.
• Izbjegavajte stavljanje tekućina direktno na kontrolnu ploču ili u blizinu električnih komponenti.
• Redovno provjeravajte sve vijke i spojeve kako biste bili sigurni da su čvrsto zategnuti i sigurni.
• Ovaj sto je dizajniran samo za upotrebu u zatvorenom prostoru.

Sadržaj paketa

Before beginning assembly, please verify that all the following components are included in your package:

• Desktop Boards ×2
• Leg with Motor ×1
• Leg ×1
• Leg Bases ×2
• Crossbar & Transmission Rod
• Controller & Power Cable
• Svi potrebni alati i hardver za montažu

Uputstva za sastavljanje

Follow these steps carefully to assemble your ErGear Electric Standing Desk. An assembly video is also provided for visual guidance.

Step 1: Assemble the Desk Legs

Attach the leg bases to the desk legs using the provided screws. Ensure they are securely fastened.

The stable T-shaped desk legs provide a sturdy foundation for the electric standing desk.

Step 2: Attach Side Plates and Transmission Rod

Connect the side plates to the desk legs. Insert the transmission rod fully into the left leg and secure it. If the two desk legs are not at the same height, insert the rod into the left leg and turn to adjust.

Step 3: Assemble and Attach the Desktop

Place the two desktop boards together, aligning the dowels. Secure the desktop to the assembled frame using the provided screws and brackets. Ensure all connections are tight.

Korak 4: Povežite kablove

Connect the motor and control panel cables to the main control box. Ensure all connections are firm and correctly oriented.

Step 5: Install Cable Hole Covers

Place the cable hole covers into the designated openings on the desktop to manage wires neatly.

Ergonomic guidelines for using the standing desk, showing optimal monitor and arm positions for both sitting and standing.

Uputstvo za upotrebu

Kontrolna tabla završenaview

The desk features an intuitive control panel with height adjustment buttons and memory presets.

The ErGear control panel, available in two versions, features a digital height display and four programmable memory settings.

Podešavanje visine

• Koristite Gore (^) i Dolje (v) arrows to smoothly adjust the desk height between 28.35 inches and 46.46 inches.
• Otpustite dugme na željenoj visini.

Memory Presets

The desk allows you to save up to 4 preferred height settings.

1. Podesite visinu stola na željenu visinu pomoću strelica gore/dolje.
2. Pritisnite M button (or equivalent memory set button). The display will flash.
3. Pritisnite jedno od numerisanih dugmadi za podešavanje (1, 2, 3 ili 4) within 3 seconds to save the current height to that preset.
4. Da biste pozvali sačuvanu visinu, jednostavno pritisnite odgovarajuće numerisano dugme za podešavanje. Stol će se automatski pomjeriti na sačuvanu poziciju.

Održavanje

• čišćenje: Obrišite radnu površinu i okvir mekom krpomamp krpom. Izbjegavajte jake hemikalije ili abrazivna sredstva za čišćenje.
• inspekcija: Periodically check all screws and connections for tightness. Re-tighten if necessary.
• Upravljanje kablovima: Ensure cables are neatly organized and not tangled or pinched to prevent damage.

Rješavanje problema

Ako naiđete na bilo kakve probleme sa svojim ErGear električnim stojećim stolom, pogledajte sljedeće uobičajene probleme i rješenja:

Specifikacije

Garancija i podrška

ErGear is committed to providing high-quality products and customer satisfaction. This product comes with:

• Dvogodišnja zaštita on the desktop and desk frame.
• Dvogodišnja zaštita on motors and electrical components.

For any questions, concerns, or warranty claims, please contact ErGear customer support. You can typically find contact information on the product packaging or the official ErGear website. Please have your model number (EGESD7W-CA) and purchase details ready when contacting support.

The ErGear Electric Standing Desk seamlessly integrates into various home office environments.