YESWELDER FLUX-135 MINI 135Amp 3-in-1 Welder Instruction Manual

1. Proizvod je gotovview

The YESWELDER FLUX-135 MINI is a versatile 135Amp 3-in-1 welding machine designed for various welding tasks. It supports Flux Core Gasless MIG, Stick, and Lift TIG welding processes. This machine is suitable for both beginners and experienced welders due to its intuitive controls and synergic features.

Slika 1: Prednja strana view of the YESWELDER FLUX-135 MINI welding machine.

Ključne karakteristike:

• Mogućnost višestrukog procesa: Supports Flux Core Gasless MIG, Stick, and Lift TIG welding.
• Sinergijska kontrola: Automatski se podudara s preporučenom jačinom zvukatage when adjusting wire feed speed for optimized welding parameters.
• Lako rukovanje: Intuitive control panel for straightforward adjustment of welding modes, voltage, and current/wire feed speed.
• Kompaktan dizajn: Mini size for portability and convenience.

Figure 2: The 3-in-1 multi-function welding machine illustrating Flux Cored, Lift TIG, and Stick welding capabilities.

2. Sigurnosne informacije

Welding can be hazardous. Always follow safety precautions to prevent injury or damage. Read and understand all safety warnings and instructions before operating this equipment.

Opće sigurnosne mjere:

• Električni šok: Can kill. Do not touch live electrical parts. Wear dry welding gloves and protective clothing. Ensure the welding machine is properly grounded.
• Isparenja i gasovi: Can be hazardous to your health. Keep your head out of the fumes. Use ventilation or exhaust to remove fumes from the breathing zone and general area.
• lučni zraci: Can burn eyes and skin. Wear a welding helmet with a proper shade filter and protective clothing.
• Požar i eksplozija: Welding sparks and hot metal can cause fires. Keep flammable materials away from the welding area. Have a fire extinguisher nearby.
• Vrući dijelovi: Može izazvati teške opekotine. Sačekajte da se oprema ohladi prije dodirivanja.
• buka: Prekomjerna buka može oštetiti sluh. Nosite zaštitu za uši.
• Radna oblast: Keep the work area clean, dry, and free from clutter. Ensure adequate lighting.

3. Postavljanje i instalacija

3.1 Priključak za napajanje

Connect the welder to a standard 110V AC power outlet. Ensure the power source is capable of providing sufficient current for the welding operations.

3.2 Welding Wire Installation (Flux Core MIG)

1. Otvorite odjeljak za dodavač žice.
2. Place a 2LB (4-inch spool diameter) welding wire spool onto the spindle. The FLUX-135 MINI is compatible with .030"/.08mm flux cored wire.
3. Provucite žicu kroz vodilicu i u mehanizam pogonskog valjka.
4. Close the drive roller tension arm and adjust the tension appropriately.
5. Provucite žicu kroz oblogu MIG gorionika dok ne izađe iz mlaznice.

Figure 3: Installation of a 2LB gasless flux cored welding wire spool.

3.3 Electrode/Torch Connections

• MIG zavarivanje: The MIG torch is typically pre-connected. Ensure the ground clamp je sigurno pričvršćen za radni komad.
• Zavarivanje elektrodom: Spojite držač elektrode na pozitivni (+) terminal i uzemljenje.amp to the negative (-) terminal for most common electrodes. Refer to electrode manufacturer specifications.
• TIG zavarivanje podizanjem: An additional Lift TIG torch (not included) is required. Connect the TIG torch to the negative (-) terminal and the ground clamp na pozitivni (+) terminal.

4. Uputstvo za upotrebu

4.1 Kontrolna tabla prekoview

The FLUX-135 MINI features a simple and intuitive control panel. It includes a digital display, mode selection knob, and adjustment knobs for voltage/current and wire feed speed.

Slika 4: Detaljno view of the control panel, highlighting synergic control and efficiency.

4.2 Odabir načina rada

Use the mode selection knob to choose between Flux MIG, Stick, or Lift TIG welding processes.

4.3 Sinergijska kontrola i podešavanje parametara

The synergic control feature simplifies parameter setting. When operating in Flux MIG mode, adjusting the wire feed speed knob will automatically suggest the corresponding voltage for optimal welding performance. For Stick and Lift TIG modes, the knobs will adjust current (amperage).

4.4 Postupci zavarivanja

• Flux Core Gasless MIG Welding:
  This mode uses flux-cored wire, eliminating the need for external shielding gas. Select Flux MIG mode, set your wire feed speed (voltage will adjust synergically), and begin welding. Ensure proper stick-out and travel speed for best results.
• Stick Welding (SMAW):
  Select Stick mode. Insert the appropriate electrode into the electrode holder. Adjust the current (amperage) based on the electrode type and material thickness. Maintain a consistent arc length and travel speed.
• Lift TIG Welding (GTAW):
  Note: Requires an additional Lift TIG torch (not included). Select Lift TIG mode. Connect the TIG torch and ground clamp as described in Section 3.3. Use ER70S-6 mild steel TIG welding rods for fabrication of mild steel. Initiate the arc by gently touching the tungsten electrode to the workpiece and then lifting it slightly. Adjust current (amperage) po potrebi.
  

  Figure 5: YESWELDER ER70S-6 mild steel TIG welding rods.
  

  Figure 6: ER70S-6 TIG welding rods available in 1/16", 3/32", and 1/8" diameters, all 16" long.

  

  Figure 7: An operator performing Lift TIG welding.

5. Održavanje

Redovno održavanje osigurava dugotrajnost i optimalne performanse vašeg aparata za zavarivanje.

5.1 Čišćenje

• Povremeno čistite vanjski dio uređaja suhom, mekom krpom.
• Use compressed air to blow out dust and debris from the cooling vents. Ensure the machine is unplugged before cleaning.

5.2 Pregled kablova i priključaka

• Regularly inspect all welding cables, torch leads, and ground clamps for signs of wear, damage, or loose connections. Replace damaged components immediately.
• Osigurajte da su svi električni priključci čvrsti i sigurni.

5.3 Wire Feeder Maintenance (MIG)

• Clean the drive rollers and wire guide tubes to prevent wire feeding issues.
• Check the MIG torch liner for blockages or wear. Replace if necessary.

6. Otkrivanje problema

Ovaj odjeljak pruža rješenja za uobičajene probleme s kojima se možete susresti.

Ako naiđete na probleme koji nisu ovdje navedeni ili ako problem i dalje postoji, obratite se korisničkoj podršci.

7. Specifikacije

Technical specifications for the YESWELDER FLUX-135 MINI.

8. Informacije o garanciji

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official YESWELDER webZa detaljne uslove garancije posjetite stranicu. Sačuvajte dokaz o kupovini za slučaj reklamacije.

9. Korisnička podrška

For technical assistance, spare parts, or any inquiries regarding your YESWELDER FLUX-135 MINI, please contact YESWELDER customer support. You can typically find contact information on the official YESWELDER webweb-mjestu ili putem vašeg prodavača.

Online resursi: Posjetite YESWELDER trgovina na Amazonu za informacije o proizvodu i podršku.