1. Uvod
Hvala vam što ste odabrali AMPBANK AT001 Portable Tire Inflator. This device is designed for convenient and efficient inflation of various items, including car tires, motorcycle tires, bicycle tires, and sports balls. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's lifespan.
Slika 1.1: AMPBANK AT001 Portable Tire Inflator and included accessories.
2. Proizvod je gotovview
2.1 Uključene komponente
- 1 x AT001 Air Compressor
- 1 x Kabl za punjenje
- 1 x Inflation Hose with Schrader attached
- 1 x Needle adapter (for sports balls)
- 1 x Valve adapter (for inflatables)
- 1 x Presta valve adapter (for bicycles)
- 1 x Brzi korisnički priručnik
2.2 Ključne karakteristike
- brza inflacija: Upgraded motor and alloy cylinder for faster inflation.
- Triple Cooling System: Heat-dissipating alloy cylinders, ventilated mesh, and built-in fan prevent overheating for continuous operation up to 30 minutes.
- Accurate Digital Pressure Gauge: High-precision sensor with 0.01Bar error margin and real-time display.
- Pet unaprijed postavljenih načina rada: Dedicated modes for cars, motorcycles, bicycles, and sports balls, plus a custom mode.
- Automatsko isključivanje: Stops inflation once the desired pressure is reached.
- Funkcija deflacije: Safely releases excess air from overinflated tires.
- Integrirano LED svjetlo: 400 lumens for illumination in low-light conditions.
- Prijenosni Power Bank: Can charge mobile phones.
- Smart Storage: Integrated compartment for adapters to prevent loss.
3. Sigurnosne informacije
Molimo vas da se pridržavate sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede ili oštećenje uređaja:
- Čuvati van domašaja djece.
- Ne koristite pumpu za naduvavanje u vlažnim uslovima ili u blizini zapaljivih tečnosti ili gasova.
- Ensure the inflation hose is securely connected to both the inflator and the item being inflated before starting.
- Do not overinflate. Always refer to the manufacturer's recommended pressure for the item being inflated.
- Monitor the pressure gauge during inflation to avoid exceeding the maximum pressure.
- If the device becomes excessively hot during use, allow it to cool down before continuing. The device has built-in overheat protection.
- Do not modify or disassemble the inflator. Contact customer support for repairs.
- Koristite samo priloženi kabel za punjenje i adaptere.
4. Podešavanje
4.1 Punjenje uređaja
The AMPBANK AT001 is powered by a Lithium Ion battery. Before first use, fully charge the device. Connect the provided charging cable to the inflator's charging port and to a suitable USB power source. The battery indicator on the digital display will show the charging status. A full charge provides extended usability.
Image 4.1: The internal battery of the AT001, highlighting its 5200mAh capacity for extended use.
4.2 Attaching the Inflation Hose and Adapters
Screw the inflation hose securely onto the inflator's air outlet. Select the appropriate adapter for the item you wish to inflate:
- Schrader ventil: For car, motorcycle, and most bicycle tires. The hose comes with a Schrader connector attached.
- Presta adapter za ventil: For bicycles with Presta valves. Screw the Presta adapter onto the Schrader connector, then attach to the tire valve.
- Adapter za iglu: For sports balls. Insert the needle into the ball's inflation port.
- Adapter ventila: For inflatable toys or other items.
The adapters can be stored in the integrated compartment on the device when not in use.
Image 4.2: Integrated storage design for inflation adapters.
5. Uputstvo za upotrebu
5.1 Uključivanje/isključivanje
Pritisnite i držite dugme za napajanje (U) to turn the device on or off. The digital display will illuminate.
5.2 Podešavanje željenog pritiska
- With the device powered on, connect the inflation hose to the item you wish to inflate. The current pressure will be displayed.
- Press the 'M' button to cycle through the preset modes (Car, Motorcycle, Bicycle, Ball) or to select a custom pressure setting.
- Use the '+' and '-' buttons to adjust the target pressure. The display will show the target pressure blinking.
Image 5.1: Digital display showing real-time tire pressure and target setting.
5.3 Proces inflacije
- Once the target pressure is set, press the green trigger button to start inflation.
- The device will automatically stop when the target pressure is reached.
- Disconnect the hose from the item and then from the inflator.
Image 5.2: The AT001 in use, inflating a car tire.
5.4 Funkcija deflacije
If an item is overinflated, the AT001 includes a deflation function. With the hose connected to the item, press and hold the deflation button (usually indicated by a downward arrow or specific icon) to release air until the desired pressure is reached. This feature helps prevent overpressure blowouts.
Image 5.3: The deflation function adapts to various road conditions and vehicle types.
5.5 Rad LED svjetla
Press the LED light button (often integrated with the power button or a separate button) to turn the built-in 400 lumens LED flashlight on or off. This is useful for nighttime inflation or emergency situations.
Image 5.4: The 400 lumens LED flashlight provides ample illumination.
6. Održavanje
- čišćenje: Obrišite uređaj mekom, suhom krpom. Ne koristite jake hemikalije ili abrazivna sredstva za čišćenje.
- Skladištenje: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure all accessories are stored in the integrated compartment to prevent loss.
- Održavanje baterije: Za optimalno trajanje baterije, punite uređaj barem jednom svaka tri mjeseca ako ga ne koristite redovno.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Uređaj se ne uključuje | Slaba baterija; Kvar uređaja | Charge the device fully; Contact customer support. |
| Inflator stops during operation or overheats | Overheat protection activated; Prolonged continuous use | Allow the device to cool down for at least 15-20 minutes before resuming use. The triple cooling system helps manage heat, but continuous operation beyond 30 minutes may trigger protection. |
| Netačno očitavanje pritiska | Hose not securely connected; Sensor issue | Ensure the hose is tightly screwed onto the valve; If problem persists, contact customer support. |
| Spora inflacija | Low battery; Large volume item | Ensure the device is fully charged; Inflation time varies based on item size and initial pressure. |
8. Specifikacije
- Brand: AMPBANKA
- Naziv modela: AT001
- Voltage: 12 Volts
- Izvor napajanja: Napaja se baterijama (litijum jonski)
- Maksimalni radni pritisak: 150 PSI
- Nivo buke: 50 dB
- Težina artikla: 2.29 funti (1.04 kilograma)
- Posebne karakteristike: Automatic Shut-Off, Cordless, LED Light, Pressure Detection, Quick Inflation
- Preporučena upotreba: Tire Inflation (Car, Motorcycle, SUV, Bicycle), Sports Balls, Inflatables
9. Garancija i podrška
AMPBANK offers the following for your AT001 Portable Tire Inflator:
- 100-Day Hassle-free Returns & Exchanges: Za sve probleme u roku od 100 dana od kupovine.
- 1-Year Extended Repair: Covers repairs for manufacturing defects for one year.
For customer support, please visit the official AMPBANK store or contact your retailer. Keep your purchase receipt for warranty claims.
Slika 9.1: AMPBANK customer support information.