Yaheetech Uputstvo za upotrebu za umjetno božićno drvce od smreke, 9 stopa (2,1 m), prethodno osvijetljeno

Uvod

This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech 9ft Pre-lit Spruce Artificial Christmas Tree. Please read all instructions carefully before setup and use to ensure safe and proper operation. This artificial Christmas tree features a snow-flocked design, hinged branches, and 900 multicolor LED lights, offering a festive and convenient holiday decoration solution.

Image: The Yaheetech 9ft Pre-lit Spruce Artificial Christmas Tree, showcasing its full, snow-flocked appearance with multicolor LED lights illuminated.

Sigurnosne informacije

• Ensure the tree is placed on a stable, level surface to prevent tipping.
• Keep the tree away from heat sources, open flames, and direct sunlight.
• Do not overload electrical outlets. Connect the tree to a suitable power source.
• Prije svake upotrebe provjerite kabel za napajanje i svjetla na oštećenja. Ne koristite ako su oštećeni.
• This product is intended for indoor and outdoor decorative displays. Avoid prolonged exposure to extreme weather conditions if used outdoors.
• Keep small children and pets away from the tree during assembly and disassembly.
• Isključite drvo iz izvora napajanja kada ga ne koristite ili prije bilo kakvog održavanja.

Sadržaj paketa

Molimo Vas da provjerite da li su svi dijelovi prisutni prije početka montaže:

• Tree Sections (A, B, C, etc., depending on height)
• Metal Folding Stand
• Screws for Stand (typically 3)
• Adapter za napajanje za LED svjetla
• Foot Pedal Switch (integrated with power cord)

Uputstva za postavljanje

Slijedite ove korake za sastavljanje vaše umjetne božićne jelke:

1. Sastavite postolje: Open the metal folding stand and insert the screws into the designated holes to secure the legs. Ensure the stand is stable and fully extended.

   Image: A diagram illustrating the hinged structure of the branches, the integrated LED lights, the foldable metal stand, and the snow-flocked appearance of the tree.

2. Umetnite donji dio: Carefully insert the largest tree section (usually marked 'A' or the bottom section) into the center hole of the assembled stand. Tighten the screws on the stand to firmly secure the tree section.
3. Connect Middle Sections: Insert the next tree section (e.g., 'B') into the top of the previous section. Ensure the sections are firmly seated. Connect the electrical cords between the sections if applicable.
4. Attach Top Section: Place the smallest tree section (usually marked 'C' or the top section) onto the top of the last assembled section. Connect any remaining electrical cords.
5. Razmutite grane: Starting from the bottom, gently pull down and spread out each branch and individual tip. Work your way up the tree, shaping the branches to create a full and natural appearance. This process may take some time to achieve the desired fullness.

   Image: A fully assembled and decorated Yaheetech Christmas tree standing in a living room, surrounded by wrapped gifts, demonstrating its impressive size and festive glow.

6. Povežite se na napajanje: Plug the power adapter into a standard electrical outlet. The tree's lights are pre-wired.

Uputstvo za upotrebu

Your Yaheetech Pre-lit Christmas Tree comes with integrated LED lights that offer multiple lighting modes. The lights are controlled via a foot pedal switch located on the power cord.

• Uključivanje/isključivanje: Press the foot pedal once to turn the lights on. Press it again to turn the lights off.
• Promjena načina rada svjetla: While the lights are on, repeatedly press the foot pedal to cycle through the 9 adjustable light modes. Each press will switch to the next mode.

Available Light Modes:

• Postojano toplo bijelo
• Stalna višebojna
• Stabilan pastel
• Prelazak iz toplo bijele u višebojnu boju
• Blijede toplo bijelo
• Fading multicolor
• Treperi toplo bijelo
• Treperi višebojni
• Flashing warm white to multicolor

Image: A visual representation of the various light modes available on the tree, including steady warm white, steady multicolor, and fading/flashing options.

Održavanje

• čišćenje: To clean the tree, gently wipe the branches with a dry cloth. Do not use liquid cleaners or solvents.
• Skladištenje: Before storing, ensure the tree is completely dry. Disassemble the tree by reversing the setup steps. Store the sections in their original box or a suitable storage bag in a cool, dry place away from direct sunlight and extreme temperatures.
• Flokiranje: The snow-flocked appearance may shed some material during initial setup and handling. This is normal and does not affect the tree's quality.

Rješavanje problema

If you encounter issues not listed here or if solutions do not resolve the problem, please contact Yaheetech customer support.

Specifikacije

Garancija i podrška

For warranty information, product support, or to purchase replacement parts, please visit the official Yaheetech webweb-mjesto ili kontaktirajte njihovu službu za korisnike. Sačuvajte račun za kupovinu u slučaju reklamacije.

Korisnička podrška: Posjetite Yaheetech trgovinu na Amazonu