SIHOO L3D Office Chair Instruction Manual

Uvod

This manual provides detailed instructions for the assembly, operation, and maintenance of your SIHOO L3D Office Chair. Designed for ergonomic support and comfort, this chair features a faux leather finish, adjustable backrest, and seat depth. Please read this manual thoroughly before use to ensure proper setup and to maximize your chair's lifespan and performance.

Sigurnosne informacije

• Maksimalna nosivost: Do not exceed the maximum weight recommendation of 300 pounds (136 kg). Exceeding this limit may cause damage to the chair and potential injury.
• Prije upotrebe provjerite jesu li svi vijci i šrafovi čvrsto zategnuti. Povremeno provjeravajte i po potrebi ponovo zategnite.
• Tokom podešavanja držite ruke i prste dalje od pokretnih dijelova kako biste spriječili njihovo priklještenje.
• Koristite stolicu na ravnoj, stabilnoj površini kako biste spriječili prevrtanje.
• Nemojte stajati na stolici.

Uputstva za sastavljanje

Assembly typically takes approximately 20-40 minutes. All necessary tools and hardware are included. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

1. Raspakujte komponente: Carefully remove all parts from the packaging. Verify that all components listed in the parts list are present. The hardware (screws, bolts) is typically provided in a blister package with extra pieces.
2. Pričvrstite kotačiće na bazu: Insert the casters into the holes at the ends of the chair base. Press firmly until they click into place.
3. Attach Gas Lift to Base: Place the gas lift cylinder into the center hole of the wheeled base.
4. Sastavljanje sjedišta i naslona: Connect the seat cushion and backrest according to the provided diagrams. Ensure all screws are aligned and tightened securely. Some parts may require careful alignment.
5. Pričvrstite naslone za ruke: Secure the armrests to the seat and backrest assembly using the provided screws.
6. Spojite sklop sjedišta na plinski lift: Pažljivo postavite sastavljeno sjedište i naslon na cilindar za podizanje plina.
7. Konačna provjera: Ensure all connections are tight and the chair is stable before use.

Image: The SIHOO L3D Office Chair, highlighting its design and adjustability.

Uputstvo za upotrebu

Podešavanje naslona

The backrest of the SIHOO L3D chair can be adjusted to three different height levels, providing up to 1.5 inches (approximately 4 cm) of vertical adjustment. To adjust, simply lift the backrest upwards. It will click into place at each level. To lower, lift it past the highest setting, and it will reset to the lowest position.

Adjusting the Seat Depth

Customize your seating experience with the adjustable seat depth, allowing for a maximum adjustment of 1.97 inches (approximately 5 cm). This feature helps you find the perfect fit for your hips and thighs, enhancing comfort and ergonomic support.

Podešavanje visine sedišta

The seat height can be adjusted to suit various desk heights and user preferences. The seat height ranges from approximately 16.75 inches (42.5 cm) to 19.75 inches (50 cm) at the center front. Use the lever located under the seat to raise or lower the chair. To raise, lift the lever while taking your weight off the seat. To lower, lift the lever while seated.

Funkcija naslona

The chair features a recline function where the backrest can tilt backward. Please note that the recline position is not lockable and will return to an upright position when pressure is released. The recline mechanism offers minimal tension or resistance.

Mobilnost

The chair is equipped with a five-wheel base for easy movement. The casters are designed to roll smoothly on various floor surfaces, including hardwood floors. Avoid lifting the chair by the seat or arms without supporting the base, as the wheeled base may separate.

Održavanje i njega

• Čišćenje umjetne kože: The premium faux leather surface is designed to be easy to clean and resists stains, scratches, and peeling. For general cleaning, wipe with a soft, damp krpom. Za tvrdokornije mrlje koristite blagi rastvor sapuna i odmah obrišite suhom krpom. Izbjegavajte jake hemikalije ili abrazivna sredstva za čišćenje.
• Održavanje okvira: Obrišite metalni okvir mekom, suhom krpom kako biste uklonili prašinu.
• Održavanje kotača: Periodically check the casters for hair or debris that may hinder smooth movement. Clean as needed.
• Provjera hardvera: Regularly inspect all screws and bolts to ensure they remain tight. Re-tighten any loose hardware to maintain stability and safety.
• Izbjegavajte direktnu sunčevu svjetlost: Dugotrajno izlaganje direktnoj sunčevoj svjetlosti može uzrokovati izblijeđivanje ili pucanje umjetne kože. Kad god je to moguće, postavite stolicu dalje od direktne sunčeve svjetlosti.

Rješavanje problema

Specifikacije proizvoda

Garancija i podrška

For warranty information, technical support, or to inquire about replacement parts, please contact SIHOO customer service directly. Refer to the product packaging or the official SIHOO webstranicu za najnovije kontakt podatke.

SIHOO Official Webstranica: Posjetite SIHOO trgovinu na Amazonu