ONEVAN Cordless Brushless Impact Wrench (Model sku006213) User Manual

Uvod

Thank you for choosing the ONEVAN Cordless Brushless Impact Wrench. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read it thoroughly before first use and keep it for future reference.

Opća sigurnosna uputstva

UPOZORENJE: Pročitajte sva sigurnosna upozorenja, upute, ilustracije i specifikacije koje ste dobili uz ovaj električni alat. Nepoštivanje svih dolje navedenih uputa može dovesti do strujnog udara, požara i/ili ozbiljne ozljede.

Sigurnost radnog područja

• Održavajte radni prostor čistim i dobro osvijetljenim. Zatrpana ili mračna područja izazivaju nesreće.
• Nemojte koristiti električne alate u eksplozivnoj atmosferi, kao što je prisustvo zapaljivih tečnosti, gasova ili prašine. Električni alati stvaraju iskre koje mogu zapaliti prašinu ili isparenja.
• Držite djecu i osobe u blizini dok koristite električni alat. Ometanje može uzrokovati da izgubite kontrolu.

Električna sigurnost

• Utikači za električni alat moraju odgovarati utičnici. Nikada nemojte modificirati utikač ni na koji način.
• Izbjegavajte kontakt tijela sa uzemljenim ili uzemljenim površinama, kao što su cijevi, radijatori, peći i hladnjaci. Postoji povećan rizik od strujnog udara ako je vaše tijelo uzemljeno.
• Ne izlažite električne alate kiši ili mokrim uslovima. Ulazak vode u električni alat povećava rizik od strujnog udara.

Lična sigurnost

• Always wear eye protection. Use appropriate safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection when necessary.
• Budite oprezni, pazite šta radite i koristite zdrav razum kada rukujete električnim alatom.
• Spriječite nenamjerno pokretanje. Uvjerite se da je prekidač u isključenom položaju prije spajanja na bateriju, podizanja ili nošenja alata.

Sadržaj paketa

Prilikom raspakivanja, molimo Vas da provjerite da li su sve dolje navedene stavke prisutne i da nisu oštećene:

• 1x ONEVAN Cordless Brushless Impact Wrench
• 2x 3.0Ah Lithium-ion Batteries
• 1x punjač baterija
• 6x Sockets (14mm, 17mm, 18mm, 19mm, 21mm, 22mm)
• Additional accessories (e.g., drill chuck, screwdriver bit adapter, retaining ring, pin)

Image: ONEVAN Cordless Impact Wrench with included accessories, including two batteries, a charger, and a set of six sockets (14mm, 17mm, 18mm, 19mm, 21mm, 22mm), along with a drill chuck and screwdriver bit adapter.

Karakteristike proizvoda

• Visokoperformansni motor bez četkica: The ONEVAN impact wrench is equipped with an advanced brushless motor, offering higher efficiency (20-30% higher than traditional brush motors), reduced wear, longer lifespan, and stable power output without smoke or sparks. This design minimizes maintenance costs and enhances durability.

Image: Internal diagram of the brushless motor, emphasizing its benefits such as high power, low energy loss, extended lifespan, and superior efficiency compared to brushed motors.
• Powerful Torque and Variable Speed: Delivers a maximum tightening torque of 280 N.m and a maximum loosening torque of 300 N.m. The tool features 2 adjustable speed levels for both forward and reverse rotation, allowing precise control by varying pressure on the trigger.
• Long-Lasting 3.0Ah Batteries: Comes with two high-capacity 3000 mAh Lithium-ion batteries, providing ample power for extended outdoor use. Integrated battery chip technology ensures reduced power loss and faster charging. A built-in battery indicator keeps you informed of the charge level.


Slika: Detaljna view of the ONEVAN Li-ion battery, illustrating its internal structure and multiple protection mechanisms including overcurrent, voltage, short circuit, chip, charging, temperature regulation, and over-discharge protection, ensuring long-term work capability.

• Forward/Reverse with Auto-Stop Function: Equipped with a locking system and distinct forward and reverse modes. In reverse mode, the auto-stop function activates once a nut or bolt is loosened, reducing speed and torque to prevent the fastener from falling off completely.


Image: Visual guide to the forward/reverse button positions and the automatic stop function in reverse, which prevents fasteners from completely detaching once loosened.

• Ugrađeno LED svjetlo: An integrated LED light illuminates the work area, improving visibility in dark or confined spaces.

Image: The impact wrench operating in a dimly lit environment, demonstrating how the built-in LED light effectively illuminates the working area for enhanced visibility.
• Multifunkcionalna upotreba: Suitable for various applications including car tire removal, household appliance maintenance, heavy equipment assembly, and general fastening tasks. Can function as an impact wrench, impact drill (with appropriate adapter), or screwdriver.


Image: An annotated diagram of the ONEVAN impact wrench, highlighting its key components such as the 1/2-inch square drive, LED light, variable speed switch, ergonomic handle, forward/reverse button, and the 3.0Ah Li-ion battery pack.

Setup

1. Punjenje baterije

1. Prije prve upotrebe provjerite je li baterija potpuno napunjena.
2. Priključite punjač na standardnu ​​utičnicu.
3. Umetnite baterijski paket na punjač dok ne klikne na svoje mjesto.
4. The charger indicator light will show the charging status. Refer to the charger manual for specific light indications.
5. Nakon što se baterija potpuno napuni, isključite je iz punjača i iskopčajte punjač iz utičnice.

2. Instaliranje baterije

1. Align the battery pack with the receptacle at the base of the impact wrench handle.
2. Slide the battery pack into the handle until it locks securely into place. Ensure it is firmly seated to prevent accidental dislodgement during operation.
3. Da biste uklonili bateriju, pritisnite dugme(a) za otpuštanje sa strane baterijskog modula i izvucite ga.

3. Attaching Sockets/Accessories

1. Ensure the tool is off and the battery is removed before attaching or removing accessories.
2. Align the square drive of the socket with the 1/2-inch square drive anvil on the impact wrench.
3. Push the socket firmly onto the anvil until it clicks into place. Some sockets may require aligning with a detent pin or friction ring.
4. To remove, pull the socket off the anvil. For stubborn sockets, a slight twisting motion may help.

Uputstvo za upotrebu

1. Uključivanje/isključivanje i kontrola brzine

• To turn on the tool, press the variable speed trigger switch. The tool speed increases with increased trigger pressure.
• Da biste isključili alat, otpustite okidač.
• The tool features 2 speed settings. Use the speed selector button (if present, typically near the trigger) to cycle between low and high speeds.

2. Rotacija naprijed/nazad

• The forward/reverse button (typically a lever above the trigger) controls the direction of rotation.
• Push the button to the left for forward rotation (tightening).
• Push the button to the right for reverse rotation (loosening).
• When the button is in the center position, the trigger is locked, preventing accidental startup. Always engage the lock when not in use or when changing accessories.

3. Using the Auto-Stop Function (Reverse Mode)

• When loosening fasteners, select reverse rotation.
• As the fastener becomes loose, the tool's auto-stop function will reduce speed and torque. This helps prevent the nut or bolt from spinning off completely and falling.
• Monitor the fastener and manually stop the tool when the desired looseness is achieved.

4. LED radno svjetlo

• The built-in LED light activates automatically when the trigger is pressed, illuminating the work area.
• It will turn off shortly after the trigger is released.

Održavanje

Regular maintenance ensures the longevity and optimal performance of your ONEVAN impact wrench.

Čišćenje

• Uvijek isključite baterijski paket prije bilo kakvog čišćenja ili održavanja.
• Koristite meku, damp krpu za čišćenje vanjskog dijela alata. Ne koristite jake hemikalije ili abrazivna sredstva za čišćenje.
• Održavajte ventilacijske otvore čistim od prašine i ostataka kako biste spriječili pregrijavanje. Po potrebi koristite komprimirani zrak.

Battery Care

• Čuvajte baterije na hladnom i suvom mestu dalje od direktne sunčeve svetlosti i ekstremnih temperatura.
• Ne skladištite baterije u ispražnjenom stanju duži period. Povremeno ih punite ako ih ne koristite.
• Izbjegavajte ispuštanje ili izlaganje baterija udarcima.

Generalna inspekcija

• Periodically inspect the tool for any signs of damage, loose screws, or worn parts.
• Provjerite da li je nakovanj kvadratnog pogona bez prekomjernog habanja ili oštećenja.
• If any damage is found, do not operate the tool. Contact customer support for assistance.

Rješavanje problema

Specifikacije

Garancija i podrška

Informacije o garanciji

ONEVAN products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ONEVAN webSačuvajte račun kao dokaz o kupovini za reklamacije u slučaju reklamacije.

Korisnička podrška

If you have any questions, require technical assistance, or need to report a problem with your ONEVAN Cordless Brushless Impact Wrench, please contact our customer support team. Contact details can typically be found on the product packaging, the official ONEVAN webweb-mjestu ili putem vašeg prodavača.

When contacting support, please have your model number (sku006213) and purchase date ready.