BSIDE Dual Channel Oscilloscope Multimeter Instruction Manual

1. Uvod

This manual provides detailed instructions for the safe and effective use of your BSIDE 3-in-1 Handheld Oscilloscope Multimeter. This versatile device integrates the functions of a dual-channel oscilloscope, a true RMS multimeter, and a DDS signal generator, making it an essential tool for various electrical testing and measurement applications.

Slika 1: Gotovoview of 3-in-1 functionality (Multimeter, DDS Generator, Oscilloscope).

2. Podešavanje

2.1 Sadržaj paketa

Provjerite da li se u vašem paketu nalaze sve dolje navedene stavke:

• 1 x Handheld Oscilloscope Multimeter
• 1 x Osciloskopska sonda
• 1 x BNC na dvostrane mjerne kablove s krokodil štipaljkom
• 1 x testni vodiči
• 1 x Termoelement
• 1 x torbica za nošenje
• 1 x Kabl za punjenje
• 8 x Markerski prstenovi
• 1 x Alat za podešavanje
• 2 x IC zaštitne kapice za testiranje
• 1 x Uputstvo za upotrebu

Napomena: The flexible AC current clamp is not included in the package and must be purchased separately if required.

Figure 2: The BSIDE Handheld Oscilloscope Multimeter and its complete set of accessories.

2.2 Uređaj je završenview

Familiarize yourself with the physical components of the device:

• Prikaz: Features a 3.98-inch TFT LCD with a 178° full-viewugao za jasno očitavanje.
• Ulazi za ulaz: Dual channels for oscilloscope measurements and a dedicated DDS output port.
• Kontrole: Intuitive button layout for mode selection, adjustments, and data saving.
• zaštita: Encased in a full-body soft silicone case for enhanced durability.

Figure 3: The device features a large 3.98-inch TFT LCD for optimal readability.

Figure 4: The top panel includes input ports for CH1, CH2, and DDS signal output.

Figure 5: The device is protected by a durable full-body soft silicone case.

3. Uputstvo za upotrebu

3.1 Uključivanje/isključivanje napajanja

To power on the device, press and hold the power button (usually marked with a circle and a vertical line) until the screen illuminates. To power off, press and hold the same button until the device shuts down.

3.2 Odabir načina rada

The device offers three primary modes: Oscilloscope, Multimeter, and DDS Generator. Use the dedicated MODE button to cycle through these functions. The current mode will be displayed on the screen.

3.3 Funkcija osciloskopa

In Oscilloscope mode, the device displays waveforms for electrical signals. It features dual channels with a 25MHz bandwidth and a 208MSa/s real-time sample rate.

• Spajanje sondi: Connect the oscilloscope probe to the appropriate channel input (CH1 or CH2) on the top of the device. Ensure a secure connection.
• Podešavanje postavki: Use the navigation buttons to adjust vertical sensitivity (V/div), time base (s/div), and trigger settings. The AUTO button can be used for automatic waveform adjustment and display.
• Mjerenja: The screen will display various waveform parameters such as Vpp (peak-to-peak voltage), Vmax, Vmin, Vavg, Vrms, frequency, and duty cycle.

3.4 Funkcija multimetra

In Multimeter mode, the device performs various electrical measurements with 6000 counts display and True RMS capability.

• Spajanje mjernih kabela: Connect the red and black test leads to the appropriate input jacks (e.g., VΩmA for voltage/otpor/struja, COM za zajedničko uzemljenje).
• Vrste mjerenja: The multimeter can measure:
  • DC Voltage: Do 1000V
  • AC Voltage: Do 750V
  • DC Current: Up to 600mA
  • AC Current: Up to 600mA (or up to 6000A with optional flexible AC current clamp)
  • Resistance: Up to 60MΩ
  • Capacitance: Up to 99.99mF
  • Temperature: -20℃ to 1000℃ / -4℉ to 1832℉ (using thermocouple)
  • Diodni test
  • Test kontinuiteta
• Izbor raspona: The device typically operates in auto-ranging mode, but manual range selection may be available via the controls.

3.5 DDS Generator Function

The DDS (Direct Digital Synthesis) Generator function allows you to output various waveforms for testing circuits.

• Povezivanje izlaza: Connect the DDS output port to your circuit using appropriate cables.
• Vrste talasnih oblika: Select from sine wave, square wave, triangle wave, full wave, half wave, and sawtooth wave.
• Podešavanje parametara: Adjust the frequency (0-2MHz) and output amplitude (0.1-3V) using the device controls. For square waves, the duty cycle (1%-99%) can also be adjusted.

4. Održavanje

4.1 Punjenje baterije

The device is equipped with a 5000mAh rechargeable Li-ion battery. Use the provided charging cable to connect the device to a suitable USB power source. The battery indicator on the screen will show the charging status.

Figure 6: The device features a high-capacity 5000mAh rechargeable battery.

4.2 Čišćenje i skladištenje

To clean the device, use a soft, dry cloth. Do not use abrasive cleaners or solvents. Store the device in its carrying case in a cool, dry place away from direct sunlight and extreme temperatures when not in use.

5. Otkrivanje problema

If you encounter issues with your device, please refer to the following common troubleshooting steps:

• Uređaj se ne uključuje: Ensure the battery is charged. Connect the device to a charger and attempt to power on again.
• Netačna očitanja: Check that probes and test leads are correctly connected and not damaged. Verify that the correct measurement mode and range are selected.
• No waveform display: In oscilloscope mode, ensure the input signal is within the device's measurement range and that the trigger settings are appropriate. Use the AUTO button to attempt automatic adjustment.

Za dodatnu pomoć, obratite se korisničkoj podršci BSIDE-a.

6. Specifikacije

7. Garancija i podrška

For warranty information, technical support, or service inquiries, please refer to the official BSIDE webweb-mjesto ili direktno kontaktirajte njihovu službu za korisnike. Sačuvajte račun kao dokaz o kupovini za reklamacije u slučaju garancije.