1. Proizvod je gotovview
The Mesqool Vibrating Alarm Clock (Model CR1027) is a portable device designed to assist with waking up through customizable alarm modes, including vibration, buzzer, or both. It features a rechargeable battery, dual alarm settings, and adjustable vibration intensity. This manual provides comprehensive instructions for its use.
Slika 1: Front view of the Mesqool Vibrating Alarm Clock, displaying the digital time, AM/PM indicator, alarm icons, and battery status.
2. Sadržaj paketa
Molimo Vas da provjerite da li se u Vašem paketu nalaze svi artikli:
- Mesqool Vibrating Alarm Clock (CR1027)
- USB kabl za punjenje
- Korisnički priručnik (ovaj dokument)
3. Izgled uređaja
Familiarize yourself with the buttons and ports on your alarm clock for proper operation.
Slika 2: Side view of the alarm clock, indicating the location of control buttons and the charging port. Specific button functions are detailed in the operating instructions.
4. Podešavanje
4.1 Početno punjenje
Before using the alarm clock for the first time, ensure it is fully charged. Connect the provided USB charging cable to the clock's charging port and then to a compatible USB power adapter (not included). The battery indicator on the display will show the charging status.
Slika 3: The alarm clock connected to a charging cable, illustrating the charging process.
4.2 Uključivanje/isključivanje napajanja
To power the device on or off, press and hold the Power button (located on the side, refer to Figure 2) for approximately 3 seconds.
5. Uputstvo za upotrebu
5.1 Postavljanje vremena
- Pritisnite Time Set jednom pritisnite dugme. Cifre za sate će početi da trepere.
- Koristite + i - dugmad za podešavanje sata.
- Pritisnite Time Set ponovo. Cifre minuta će treptati.
- Koristite + i - dugmad za podešavanje minuta.
- Pritisnite Time Set a third time to confirm the time and exit the setting mode.
5.2 Podešavanje alarma (Alarm 1 i Alarm 2)
The alarm clock supports two independent alarms. The procedure for setting each alarm is identical.
- Pritisnite Alarm 1 or Alarm 2 button once. The alarm time will flash.
- Koristite + i - dugmad za podešavanje željenog sata alarma.
- Pritisnite odgovarajuće Alarm button again. The alarm minutes will flash.
- Koristite + i - dugmad za podešavanje željenih minuta alarma.
- Pritisnite odgovarajuće Alarm button a third time to confirm the alarm time.
- Odmah nakon podešavanja vremena, pritisnite dugme Alarm button repeatedly to cycle through the available alarm modes: Samo vibracije, Samo zujalica, i Vibration + BuzzerOdgovarajuća ikona će se pojaviti na ekranu.
- To activate or deactivate an alarm, press the respective Alarm dugme dok se ikona alarma ne pojavi (aktivira se) ili ne nestane (deaktivira se).
Slika 4: Display showing the three alarm modes: Vibration (VIB), Vibration + Buzzer (VIB+BUZZ), and Buzzer (BUZZ).
5.3 Funkcija odgode
When an alarm is active, press the large Snooze/Light button (typically on the top or front, refer to Figure 2) to temporarily silence the alarm for approximately 9 minutes. The alarm will reactivate after this period.
5.4 Zaustavljanje alarma
To stop an active alarm, press any button other than the Snooze/Light button. The alarm will then reset for the next scheduled activation.
5.5 Podešavanje intenziteta vibracija
The alarm clock offers three levels of vibration intensity: Low, Middle, and High.
- While the alarm is not active, press the Vibracije dugme (pogledajte sliku 2).
- Each press will cycle through the intensity levels. The display may indicate the current level.
Slika 5: Illustration of the three vibration intensity levels: Low, Middle, and High.
5.6 Osvetljenost ekrana
Pritisnite Light button (often combined with Snooze, refer to Figure 2) to cycle through different display brightness levels.
6. Održavanje
- Clean the device with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals.
- Ne izlažite uređaj ekstremnim temperaturama, direktnoj sunčevoj svjetlosti ili prekomjernoj vlazi.
- Ensure the charging port remains free of dust and debris to maintain proper connection.
- When storing the device for extended periods, keep it in a cool, dry environment.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Sat se ne uključuje. | Baterija je prazna. | Connect the device to a power source using the USB cable and allow it to charge fully. |
| Alarm does not sound or vibrate. | Alarm nije aktiviran ili je nepravilno podešen. | Verify that the alarm time is set correctly and the desired alarm mode (Vibration, Buzzer, or both) is selected and activated (alarm icon visible on display). |
| Ekran je taman ili nečitljiv. | Brightness level is set too low. | Pritisnite Light dugme za povećanje svjetline ekrana. |
| Dugmad ne reagiraju. | Privremeni softverski kvar. | Try restarting the device by holding the Power button for 3 seconds. If the issue persists, allow the battery to fully deplete and then recharge. |
8. Specifikacije
- Model: CR1027
- Brand: Mesqool
- Vrsta prikaza: LED
- Izvor napajanja: Napajanje na baterije (punjivo)
- Kapacitet baterije: 3000mAh
- Dimenzije proizvoda: Approximately 3.35"W x 3.35"H x 1.06"D
- Težina artikla: 7.4 unce
- Posebne karakteristike: Adjustable Volume, Dual Alarms, Snooze Function, Vibration Alarm
9. Garancija i podrška
Mesqool products are manufactured to high standards. For warranty information, technical assistance, or customer support, please refer to the contact details provided on the product packaging or visit the official Mesqool webMolimo sačuvajte račun kao dokaz o kupovini za reklamacije u slučaju reklamacije.
Slika 6: Product packaging, which typically includes manufacturer details and support contact information such as email (e.g., support-eu@mesqool.com) and website (e.g., http://www.mesqool.com).