Acebeam Terminator M2-X Dual Head Spot/Flood EDC svjetiljka - uputstvo za upotrebu

1. Uvod

This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your Acebeam Terminator M2-X Dual Head Spot/Flood EDC Flashlight. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. Sigurnosna uputstva

• Zaštita očiju: Do not shine the flashlight directly into eyes. The powerful beam can cause temporary vision impairment or permanent damage.
• Upozorenje o vrućini: The flashlight may become hot during prolonged use at high output levels. Handle with care to avoid burns.
• Sigurnost baterije:
  • Use only the recommended 18650 Lithium-Ion battery.
  • Nemojte rastavljati, bušiti ili kratko spajati bateriju.
  • Držite baterije dalje od vode i vatre.
  • If the battery is damaged or leaking, discontinue use immediately.
• djeca: Čuvati van domašaja djece.
• Rastavljanje: Do not attempt to disassemble the flashlight head or body, as this may damage the device and void the warranty.

3. Sadržaj paketa

Upon opening your Acebeam Terminator M2-X package, please verify that all items are present and in good condition.

Slika 3.1: The Acebeam Terminator M2-X flashlight, an included 3100mAh 18650 battery, and two USB-C charging cables.

• Acebeam Terminator M2-X Flashlight
• Acebeam ARC18650H-310A 3100mAh 18650 Li-ion Battery (with integrated USB-C charging port)
• USB-C kabl za punjenje
• Korisnički priručnik (ovaj dokument)
• Traka za vezivanje (ako je uključena)
• Spare O-rings (if included)

4. Proizvod je gotovview

The Acebeam Terminator M2-X is a compact, dual-head EDC (Everyday Carry) flashlight featuring both a floodlight and a spotlight, along with auxiliary RGB lights. It is designed for versatility in various lighting scenarios.

Slika 4.1: The compact design and dimensions of the M2-X, suitable for everyday carry.

4.1 Ključne karakteristike

• Dvostruki izvori svjetlosti: Independent floodlight and spotlight for varied illumination needs.
• High CRI Floodlight: Nichia 519A 5000K High CRI90 LEDs for accurate color rendering.
• Snažni reflektor: Long-range beam for distant illumination.
• Auxiliary RGB Lights: Multiple color options and signal modes.
• Kompaktan dizajn: Durable aluminum construction with a detachable body clip for easy carry.

4.2 Komponente

Slika 4.2: Detaljno view of the floodlight (left) and spotlight (right) heads.

• Floodlight Head: Contains 3x Nichia 519A 5000K High CRI90 LEDs.
• Spotlight Head: Single LED for focused, long-distance beam.
• Auxiliary Light Emitters: Located within the floodlight head for RGB functions.
• Prekidač za rep: For power on/off and brightness adjustment.
• Bočno dugme: For switching between floodlight, spotlight, and auxiliary light modes.
• Kapac baterije: Removable for battery access.
• Kopča za tijelo: Detachable stainless steel clip for secure attachment.

5. Podešavanje

5.1 Instalacija baterije

1. Odvrnite zadnji poklopac baterijske lampe okretanjem suprotno od smjera kazaljke na satu.
2. Insert the included Acebeam 18650 battery with the positive (+) terminal facing towards the flashlight head.
3. Screw the tail cap back on clockwise, ensuring it is tightened completely. The flashlight will not operate if the tail cap is not fully secured.

5.2 Početno punjenje

The included 18650 battery features an integrated USB-C charging port. It is recommended to fully charge the battery before first use.

1. Pronađite USB-C priključak sa strane baterije 18650.
2. Connect the provided USB-C cable to the battery's port and to a USB power source (e.g., wall adapter, computer USB port).
3. Indikatorska lampica na bateriji će pokazivati ​​status punjenja (obično crvena za punjenje, zelena za potpuno napunjenu).
4. Once fully charged, disconnect the cable and reinsert the battery into the flashlight.

6. Uputstvo za upotrebu

The Acebeam Terminator M2-X features a tail switch for power and brightness, and a side button for mode selection (Floodlight, Spotlight, Auxiliary Light).

Slika 6.1: Gotovoview of multi-light sources and mode selection.

6.1 Basic Operation (Tail Switch)

• Uključivanje/isključivanje: Single click the tail switch to turn the flashlight ON or OFF.
• Brightness Adjustment (Floodlight/Spotlight): When the light is ON, press and hold the tail switch to cycle through brightness levels (Moonlight, Low, Med1, Med2, High, Turbo for Floodlight; High for Spotlight). Release the switch at your desired level. The light will memorize the last used brightness level for Floodlight and Spotlight independently.
• Instant Turbo: From OFF, press and hold the tail switch for approximately 1 second to activate Turbo mode directly. Release to turn OFF.
• Moonlight Mode (Floodlight only): From OFF, press and hold the tail switch for approximately 0.5 seconds to activate Moonlight mode.

6.2 Mode Selection (Side Button)

The side button controls which light source is active (Floodlight, Spotlight, or Auxiliary Light).

• Switching Main Modes: Single click the side button to cycle between Floodlight, Spotlight, and Auxiliary Light modes. The flashlight will remember the last selected mode.
• Floodlight + Spotlight (Combined Mode): From either Floodlight or Spotlight mode, double-click the side button to activate both simultaneously. Double-click again to return to the previous single mode.
• Strobe (Floodlight): From Floodlight mode, triple-click the tail switch to activate Strobe. Single click the tail switch to turn OFF.

6.3 Pomoćni svjetlosni režimi

When in Auxiliary Light mode (selected via the side button), the tail switch controls the RGB light functions.

Slika 6.2: Available auxiliary light modes.

• Cycling RGB Colors: With the auxiliary light ON, single click the tail switch to cycle through: Seven-color automatic cycle, Red, Green, Blue, Green-Signal Light, Red-SOS.
• Turning OFF Auxiliary Light: Press and hold the tail switch while in Auxiliary Light mode to turn it OFF.

6.4 Indikator nivoa baterije

The M2-X features an indicator light to show battery status. This indicator typically turns red when the battery charge drops below 20%.

7. Održavanje

• čišćenje: Očistite tijelo svjetiljke mekom krpomamp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
• Navoji i O-prstenovi: Periodically lubricate the threads and O-rings with silicone grease to maintain water resistance. Replace O-rings if they appear damaged or worn.
• Održavanje baterije:
  • Čuvajte bateriju na hladnom i suvom mestu kada nije u upotrebi.
  • Ako skladištite bateriju duži period, napunite je do približno 50% kapaciteta.
  • Avoid fully discharging the battery, as this can reduce its lifespan.

8. Otkrivanje problema

9. Specifikacije

Slika 9.1: Detailed technical parameters for the M2-X.

10. Garancija i podrška

For warranty information and customer support, please refer to the official Acebeam website or contact your authorized Acebeam dealer. Keep your purchase receipt as proof of purchase for any warranty claims.

Acebeam Official Webstranica: www.acebeam.com