Uvod
This manual provides essential instructions for the safe and effective use of the BIHUI Professional Tile Cutter TCM1650. Please read this manual thoroughly before operating the tool to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
Sigurnosna uputstva
Always follow basic safety precautions to reduce the risk of injury.
- Nosite odgovarajuću ličnu zaštitnu opremu (LZO), uključujući zaštitne naočale i rukavice.
- Osigurajte da je radni prostor čist, dobro osvijetljen i bez prepreka.
- Držite djecu i prolaznike podalje od operativnog područja.
- Do not operate the tile cutter if you are fatigued or under the influence of drugs or alcohol.
- Inspect the tool for damage before each use. Do not use if any parts are damaged.
- Use the correct cutting wheel for the type of tile being cut.
- Always secure the tile firmly before scoring and breaking.
Components Overview
Familiarize yourself with the main components of your BIHUI Professional Tile Cutter TCM1650.
- Scoring Wheel: The carbide wheel used to score the tile surface.
- Scoring Handle: Used to apply pressure and move the scoring wheel.
- Breaking Bar/Pressure Plates: Applies pressure to break the tile along the score line.
- Osnovna ploča: The main support surface for the tile.
- Extension Arms: Provide additional support for larger tiles.
- Measuring Guide/Gauge: For accurate straight and angled cuts.
- Kotači i ručka: Za praktičan transport.
Slika 1: Glavni view of the BIHUI Professional Tile Cutter TCM1650, showing the scoring handle, breaking bar, and base.
Setup
- Raspakivanje: Pažljivo izvadite sve komponente iz ambalaže. Pregledajte da li ima oštećenja prilikom transporta.
- Montaža (ako je potrebno): Attach the extension arms to the main base if they are not pre-assembled. Ensure they are securely fastened.
- plasman: Place the tile cutter on a stable, level surface.
- Adjusting the Gauge: For straight cuts, align the measuring guide to the desired cutting dimension. For angled cuts, adjust the angle guide accordingly.
Uputstvo za upotrebu
Preparing the Tile
- Clean the tile surface to remove any dust or debris.
- Mark the desired cut line on the tile using a pencil or marker.
Pravljenje ravnog reza
- Postavite pločicu: Place the tile on the base plate, aligning your marked cut line with the scoring wheel path. Ensure the tile is flush against the measuring guide.
- Bodovanje pločice: Position the scoring wheel at the edge of the tile furthest from you. Apply firm, consistent downward pressure on the scoring handle and push the wheel across the tile in a single, continuous motion towards you. A distinct scoring sound should be heard. Do not score the tile multiple times.
- Razbij pločicu: Once scored, position the breaking bar directly over the scored line. Apply quick, firm downward pressure on the breaking handle until the tile snaps cleanly along the score line.
Figure 2: Demonstrating the scoring process on a tile using the BIHUI Professional Tile Cutter.
Pravljenje pod uglom
- Adjust the Angle Guide: Loosen the locking mechanism for the angle guide and set it to the desired angle. Tighten the mechanism to secure the guide.
- Position and Score: Place the tile against the adjusted angle guide and follow the scoring procedure as described for straight cuts.
- Razbij pločicu: Break the tile along the scored line using the breaking bar.
Održavanje
- čišćenje: After each use, clean the tile cutter to remove tile dust and debris. Use a brush or compressed air.
- podmazivanje: Periodically apply a light machine oil to the scoring rail and moving parts to ensure smooth operation.
- Scoring Wheel Replacement: Replace the scoring wheel when it becomes dull or chipped to ensure clean cuts. Refer to the manufacturer's specifications for compatible replacement wheels.
- Skladištenje: Store the tile cutter in a dry, clean environment, away from direct sunlight and extreme temperatures.
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Uneven or jagged cuts | Dull or damaged scoring wheel; inconsistent pressure during scoring; tile not properly secured. | Replace scoring wheel; apply consistent pressure; ensure tile is flush against guides. |
| Tile not breaking cleanly | Insufficient scoring depth; breaking bar not aligned with score line; incorrect breaking technique. | Apply more pressure during scoring; ensure breaking bar is centered; apply quick, firm pressure. |
| Scoring handle sticks or moves roughly | Lack of lubrication; accumulated debris on rail. | Clean and lubricate the scoring rail. |
Specifikacije
- Model: TCM1650
- Brand: BIHUI
- Maksimalna dužina rezanja: Oko 65 inča
- Breaking Power: 1,750 lbs
- Težina artikla: 73.8 funte
- Dimenzije paketa: 63 x 19 x 9 inča
- ručka: PP and TPR soft grip
- tehnologija: Roller bearing technology
- baza: Metal base with spring base plates
Garancija i podrška
For warranty information or technical support, please contact BIHUI customer service. Refer to your purchase documentation for specific warranty terms and contact details.
Proizvođač: BIHUI
Broj dijela: TCM1650
Služba za korisnike: Please visit the official BIHUI webweb-mjesto ili kontaktirajte prodavača za podršku.