User Manual: Tire Inflator Portable Air Compressor

Uvod

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new Portable Tire Inflator. Please read this manual thoroughly before using the device and retain it for future reference.

Sigurnosna uputstva

• Prije upotrebe provjerite je li uređaj potpuno napunjen.
• Ne koristite pumpu za naduvavanje u blizini zapaljivih tečnosti ili gasova.
• Čuvati van domašaja djece.
• Do not over-inflate tires; always refer to the vehicle's recommended tire pressure.
• Avoid continuous operation for extended periods to prevent overheating. Allow the device to cool down if it becomes hot.
• Nemojte rastavljati niti modificirati uređaj.
• Store in a dry place away from direct sunlight and extreme temperatures.

Sadržaj paketa

• Prijenosna pumpa za napuhavanje guma
• Inflation Tube
• USB kabl za punjenje
• 4 x Nozzles (for car, bike, ball, swimming ring)

Image: The portable tire inflator unit shown with its included accessories: an inflation hose, a USB charging cable, and four different nozzle adapters for various inflation needs.

Product Overview

Upoznajte se sa komponentama vašeg pumpača za gume:

• Digitalni prikaz: Shows current pressure, target pressure, and battery level.
• Pressure Unit Button (R): Short press to switch between BAR/PSI/KPA/KG/CM^2. Long press to turn off.
• +/- dugmad: Adjust target pressure.
• Dugme za napajanje: Start/stop inflation.
• LED svjetlo: Obezbjeđuje osvjetljenje u uslovima slabog osvjetljenja.
• Priključak za naduvavanje: Where the inflation tube connects.
• USB priključak za punjenje: Za ponovno punjenje uređaja.

Slika: Detaljna view of the inflator's digital display, highlighting the pressure unit switch button (R) and the plus/minus buttons for adjusting the preset pressure.

Setup

1. Početna naplata: Before first use, fully charge the inflator using the provided USB cable. The digital display will indicate charging status. A full charge takes approximately 3-4 hours.
2. Pričvrstite cijev za naduvavanje: Screw the inflation tube securely into the inflation port on the device.

Uputstvo za upotrebu

Opći koraci inflacije:

1. Spajanje na ventil gume: Screw the inflation tube's nozzle onto the tire valve stem. Ensure a tight connection to prevent air leakage.
2. Uključeno: The device typically powers on automatically when the inflation tube is connected or by pressing any button.
3. Odaberite jedinicu pritiska: Short press the "R" button to cycle through pressure units (BAR, PSI, KPA, KG/CM^2) until your desired unit is displayed.
4. Postavite ciljani pritisak: Use the "+" and "-" buttons to adjust the target pressure to the recommended value for your item (e.g., vehicle tire, bicycle tire, sports ball).
5. Početak inflacije: Press the power button to begin inflation. The digital display will show the current pressure increasing.
6. Automatsko isključivanje: The inflator will automatically stop when the preset target pressure is reached.
7. Prekini vezu: Unscrew the inflation tube from the valve stem.
8. Iskljuciti: Long press the "R" button to turn off the inflator.

Image: A step-by-step visual guide demonstrating the easy operation of the tire inflator, including connecting the hose, setting pressure, starting inflation, and the automatic shut-off feature.

Korištenje LED svjetla:

The built-in LED light can be activated to provide illumination during low-light conditions or nighttime use. Refer to the device's specific button for light activation (often a dedicated button or a long press of the power button).

Image: The tire inflator in use, with its integrated LED light illuminating the tire valve area, demonstrating its utility for nighttime or low-light inflation.

Korištenje različitih mlaznica:

The inflator comes with 4 extra nozzles for various applications:

• Needle Nozzle: Za sportske lopte (npr. košarkaške lopte, fudbalske lopte).
• Tapered Nozzles: For inflatable toys, swimming rings, and other low-pressure inflatables.

Attach the appropriate nozzle to the inflation tube before connecting to the item to be inflated.

Image: An illustration detailing the four preset inflation modes available on the device, showing recommended PSI levels for car tires (36 PSI), motorcycles (33 PSI), bicycles (30 PSI), and balls (8 PSI).

Održavanje

• čišćenje: Obrišite vanjski dio pumpe za naduvavanje mekom,amp tkanina. Nemojte koristiti jake hemikalije ili abrazivna sredstva za čišćenje.
• Skladištenje: Store the inflator and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the inflation tube is neatly coiled.
• Održavanje baterije: To prolong battery life, avoid fully discharging the battery frequently. Recharge the device periodically if not used for a long time.

Rješavanje problema

Specifikacije

• Naziv modela: ST-5007
• Maksimalni radni pritisak: 150 PSI
• Kapacitet protoka zraka: 12 L / Min
• baterija: 2 * 2000 mAh high-density USB rechargeable Lithium-ion batteries (included)
• Vrijeme punjenja: 3-4 sata
• Vrijeme kontinuirane upotrebe: Approximately 30 minutes (on full charge)
• Ulazni voltage: 12V (from internal battery)
• Nivo buke: 10 dB (as per specification, though typical operating noise might be higher)
• Težina artikla: 1.26 funte
• Dimenzije: 8.39 x 6.26 x 2.64 inča (dimenzije pakovanja)

Garancija i podrška

Ovaj proizvod dolazi sa a 1 godine garancije from the date of purchase. For warranty claims, technical support, or any inquiries, please contact the seller or manufacturer through your purchase platform.

Molimo sačuvajte dokaz o kupovini radi provjere garancije.