Hoco QS2 Portable Smart Air Pump & Emergency Start-Up Power Bank User Manual

1. Uvod

Thank you for choosing the Hoco QS2 Portable Smart Air Pump & Emergency Start-Up Power Bank. This device is a multi-functional tool designed to provide reliable assistance in various situations, including jump-starting vehicles, inflating tires, and charging electronic devices. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your device.

2. Sigurnosne mjere

Always observe the following safety guidelines to prevent injury or damage to the device and property.

• Ne izlažite uređaj ekstremnim temperaturama, direktnoj sunčevoj svjetlosti ili vatri.
• Čuvati van domašaja djece.
• Do not disassemble, modify, or attempt to repair the device yourself. Contact qualified service personnel.
• Ensure proper ventilation during operation, especially when using the air pump or jump start function.
• Izbjegavajte kratki spoj na izlaznim terminalima.
• Ne koristite startni uređaj ako je baterija prazna.amps ili kablovi su oštećeni.
• When jump-starting, ensure the vehicle's ignition is off and all accessories are unplugged.
• Do not over-inflate tires. Always refer to the recommended tire pressure for your vehicle.
• If the device becomes excessively hot during use, discontinue operation immediately.

3. Sadržaj paketa

Molimo označite kućicu za sljedeće stavke:

• 1 x Hoco QS2 8000 mAh Portable Smart Air Pump Emergency Start-Up Power Bank
• 1 x Jump Start Cables (Red and Black Clamps)
• 1 x Air Hose with Valve Connector
• Various Nozzle Adapters (e.g., for bicycles, balls)
• 1 x USB Type-C kabel za punjenje

Figure 1: Hoco QS2 and its complete set of accessories.

4. Komponente proizvoda

Familiarize yourself with the different parts of your Hoco QS2 device.

Slika 2: Gotovoview of the Hoco QS2 device.

• Digitalni prikaz: Shows current pressure, battery level, and selected mode.
• Kontrolna dugmad: Snaga, odabir načina rada, povećanje/smanjenje pritiska.
• Priključak za crijevo za zrak: Connects the inflation hose.
• Port za pokretanje: Connects the jump start cables.
• USB Output Ports (2x): Za punjenje eksternih uređaja (5V/2.4A).
• Ulazni port tipa C: For charging the Hoco QS2 itself (5V/2.4A).
• LED bljeskalica: Obezbeđuje osvetljenje.

Slika 3: Bočna strana view of the Hoco QS2 with ports visible.

5. Podešavanje i punjenje

5.1 Charging the Hoco QS2

Before first use, fully charge the Hoco QS2. It is recommended to keep the device charged above 50% for optimal performance, especially for jump-starting.

1. Connect the provided USB Type-C charging cable to the Type-C input port on the Hoco QS2.
2. Connect the other end of the USB cable to a 5V/2.4A USB wall adapter (not included) or a compatible USB port.
3. The digital display will indicate the charging status and battery level.
4. Vrijeme punjenja može varirati ovisno o izvoru napajanja.

6. Uputstvo za upotrebu

6.1 Jump Start Function

The Hoco QS2 can jump-start vehicles with up to 4.0L gasoline or 2.0L diesel engines.

1. Ensure the Hoco QS2 is sufficiently charged (at least 75% battery recommended).
2. Isključite paljenje vozila i svu električnu opremu.
3. Spojite crveni (+) clamp kabla za paljenje vozila na pozitivni (+) pol akumulatora vozila.
4. Spojite crni (-) clamp to the negative (-) terminal of the vehicle's battery or a solid, unpainted metal part of the engine block (ground point).
5. Insert the blue connector of the jump start cable into the jump start port on the Hoco QS2.
6. Once connected, the Hoco QS2 will automatically enter jump start mode.
7. Pokrenite motor vozila. Ako se ne pokrene odmah, pričekajte 30 sekundi prije nego što pokušate ponovo. Nemojte paliti duže od 3 sekunde po pokušaju.
8. Once the vehicle starts, immediately disconnect the jump start cable from the Hoco QS2, then remove the black (-) clamp, nakon čega slijedi crveni (+) clamp iz akumulatora vozila.

Figure 4: Using the Hoco QS2 for jump-starting a vehicle.

6.2 Tire Inflation Function (Air Pump)

The Hoco QS2 can inflate tires up to 10.3 bar (150 PSI) and features multiple inflation modes.

1. Connect the air hose to the air hose port on the Hoco QS2.
2. Attach the other end of the air hose to the tire valve. Ensure a secure connection to prevent air leakage. Use appropriate nozzle adapters for other inflatables (e.g., bicycle tires, sports balls).
3. Press the Power button to turn on the device. The display will show the current tire pressure.
4. Press the 'M' (Mode) button to cycle through the inflation modes: Car, Motorcycle, Bicycle, Basketball. Each mode has a default pressure setting, which can be adjusted.
5. Koristite dugmad '+' i '-' da biste podesili željeni ciljni pritisak.
6. Press the Power button again to start inflation. The pump will automatically stop once the target pressure is reached.
7. Odspojite crijevo za zrak s ventila gume i uređaja.

Figure 5: Inflating a car tire with the Hoco QS2.

6.3 Funkcija prenosne baterije

The Hoco QS2 can charge your electronic devices via its dual USB output ports.

1. Connect your device's USB charging cable to one of the USB output ports on the Hoco QS2.
2. Connect the other end of the cable to your electronic device (e.g., smartphone, tablet).
3. The Hoco QS2 will automatically begin charging your device.
4. The digital display will show the remaining battery level of the power bank.

6.4 LED Flashlight Function

The integrated LED flashlight provides illumination for various situations.

• To turn on the flashlight, press and hold the 'Light' button (usually indicated by a light bulb icon).
• Press the 'Light' button again to cycle through different light modes (e.g., steady on, SOS signal, strobe).
• Press and hold the 'Light' button again to turn off the flashlight.

7. Održavanje i skladištenje

• Uređaj čistite mekom, suhom krpom. Ne koristite jake hemikalije ili abrazivna sredstva za čišćenje.
• Store the Hoco QS2 in a cool, dry place, away from direct sunlight and moisture.
• For long-term storage, charge the device every 3-6 months to maintain battery health.
• Ensure all ports are covered when not in use to prevent dust and debris from entering.

8. Otkrivanje problema

9. Tehničke specifikacije

10. Garancija i podrška

HOCO products are designed and manufactured to the highest quality standards. For warranty information and customer support, please refer to the warranty card included with your purchase or visit the official HOCO webSačuvajte račun kao dokaz o kupovini u slučaju bilo kakvih reklamacija.