1. Uvod
The OWON HDS25 is a compact, multi-functional handheld device integrating a 2-channel oscilloscope and a 20,000-count multimeter. Designed for portability and versatility, it features a 3.5-inch LCD display, USB Type-C connectivity for charging and data transfer, and supports SCPI commands for remote control. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your HDS25 device.
2. Proizvod je gotovview
2.1 Ključne karakteristike
- 3-u-1 funkcionalnost: Combines a 2-channel oscilloscope and a 20,000-count True RMS multimeter.
- osciloskop: Propusni opseg od 25MHz, 250MSa/s u realnom vremenuample rate, 8K record length.
- multimetar: Mjere AC/DC voltage, AC/DC struja, otpor, kapacitet, dioda i kontinuitet.
- Prikaz: LCD od 3.5 inča visoke rezolucije.
- Povezivanje: USB Type-C for charging and PC communication, supports SCPI commands.
- prenosivost: Compact design with approximately 4 hours of continuous battery operation.
2.2 Komponente uređaja
The following image illustrates the main components of the OWON HDS25 device:
The device features a central 3.5-inch LCD screen for waveform display and measurement readings. Below the screen are function buttons (F1-F4), mode selection buttons (Mode, CH1/2, HOR, System, Save, Auto, Trig/Δ, Power, Play/Pause), and a directional pad for navigation. At the bottom, there are input jacks for current (A, mA), common ground (COM), and voltage/resistance/capacitance (VΩ+C) measurements.
2.3 Uključeni dodaci
- USB kabel tipa C
- Osciloskopske sonde (2)
- Probe Adjustment Tool
- Ispitni kablovi za multimetar
- Zaštitna torba
3. Podešavanje
3.1 Punjenje uređaja
Before initial use, fully charge the device using the provided USB Type-C cable and a compatible power adapter (not included). The charging indicator on the device will show the charging status.
3.2 Spajanje sondi i elektroda
- Osciloskopske sonde: Connect the BNC connector of the oscilloscope probes to the CH1 and CH2 input ports on the top of the device. Ensure a secure connection.
- Ispitni kablovi za multimetar: For multimeter functions, insert the red test lead into the VΩ+C jack and the black test lead into the COM jack. For current measurements, use the A or mA jacks as appropriate.
3.3 Uključivanje/isključivanje
Pritisnite i držite Snaga button (usually marked with a circle and vertical line symbol) to turn the device on or off.
4. Uputstvo za upotrebu
4.1 Opća navigacija
- Koristite Mode button to switch between Oscilloscope and Multimeter modes.
- The directional pad (up, down, left, right) is used to navigate menus and adjust parameters.
- Dugmad F1 to F4 correspond to on-screen menu options.
- The Sistem button accesses system settings.
- The Sačuvaj button allows saving waveforms or measurement data.
4.2 Režim osciloskopa
In Oscilloscope mode, the device displays real-time waveforms. Use the following controls:
- CH1/2: Selects the active channel or displays both.
- HOR (Horizontal): Adjusts the time base (horizontal scale) of the waveform.
- Vertical Scale: Use the directional pad (up/down) to adjust the voltage scale for the selected channel.
- Trig/Δ (Trigger): Configures trigger settings (edge, level, mode) to stabilize the waveform display.
- Auto: Automatically adjusts vertical, horizontal, and trigger settings for a stable waveform display.
- Pusti/pauza: Freezes or resumes the waveform acquisition.
4.3 Režim multimetra
In Multimeter mode, the device functions as a digital multimeter. Use the directional pad to select the desired measurement function (Voltage, Current, Resistance, etc.). Ensure the test leads are connected to the correct input jacks for the selected measurement type.
- VoltagMjerenje (V): Connect leads in parallel with the circuit.
- Current Measurement (A/mA): Connect leads in series with the circuit. Ensure correct jack selection (A or mA) based on expected current.
- Mjerenje otpora (Ω): Connect leads across the component when power is off.
- Continuity/Diode: For checking circuit continuity or diode function.
- Mjerenje kapacitivnosti (F): Connect leads across the capacitor when power is off.
5. Održavanje
5.1 Čišćenje
Obrišite vanjski dio uređaja mekom,amp cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off and disconnected from all power sources and measurement circuits before cleaning.
5.2 Njega baterija
To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, especially if it will be stored for an extended period. Store the device in a cool, dry place.
5.3 Skladištenje
When not in use, store the HDS25 in its protective bag in a clean, dry environment away from direct sunlight, extreme temperatures, and high humidity.
6. Otkrivanje problema
If you encounter issues with your OWON HDS25, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Uređaj se ne uključuje. | Slaba baterija ili neispravan gumb za uključivanje. | Punite uređaj najmanje 30 minuta. Ako i dalje ne reaguje, kontaktirajte podršku. |
| U režimu osciloskopa se ne prikazuje talasni oblik. | Incorrect probe connection, wrong vertical/horizontal scale, or trigger settings. | Ensure probes are securely connected. Press the Auto button. Adjust vertical (voltage) and horizontal (time) scales. Check trigger level. |
| Multimeter readings are inaccurate or zero. | Incorrect lead connection, wrong measurement function selected, or open circuit. | Verify test leads are in the correct jacks for the selected function. Ensure proper connection to the circuit. Check for open circuits. |
| Uređaj se zamrzava ili prestaje reagirati. | Softverski kvar. | Perform a soft reset by holding the power button until the device turns off, then restart. If the issue persists, contact support. |
7. Specifikacije
| Feature | Specifikacija |
|---|---|
| Model | HDS25 |
| Bandwidth | 25 MHz |
| Kanali | 2 |
| Sample Rate | 250 MSa/s |
| Record Length | 8K |
| Brojanje multimetara | 20,000 |
| Display | 3.5-inčni LCD |
| Povezivanje | USB Type-C (charging & data) |
| Trajanje baterije | Pribl. 4 sati |
| Certifikati | CE, RoHS, UL |
| Uključeni artikli | USB cable, probes, probe adjustment tool, multimeter leads, bag |
8. Garancija i podrška
8.1 Informacije o garanciji
The OWON HDS25 comes with a 3-godišnja garancija proizvođača za glavnu jedinicu i 1 godine garancije for included accessories. Please retain your proof of purchase for warranty claims.
8.2 Korisnička podrška
For technical assistance, troubleshooting, or warranty inquiries, please contact OWON customer support. You can also find the latest user manual and support resources on the official OWON webstranica (owon.co.jp) or on the product page where you purchased the device.