Yaheetech YA-00134064

Yaheetech Ergonomic Office Chair User Manual

Marka: Yaheetech | Model: YA-00134064

1. Uvod

Thank you for choosing the Yaheetech Ergonomic Office Chair. This chair is designed to provide optimal comfort and support for long hours of sitting, featuring a breathable mesh back, adjustable headrest, flexible lumbar support, and versatile armrests. Please read this manual carefully before assembly and use to ensure proper setup and operation, and to maximize the lifespan of your chair.

2. Sigurnosna uputstva

  • Prije sastavljanja provjerite jesu li svi dijelovi prisutni i neoštećeni. Ne koristite ako bilo koji dio nedostaje ili je slomljen.
  • Sastavite stolicu na mekoj, čistoj površini kako biste spriječili ogrebotine.
  • Ne zatežite vijke previše tokom montaže kako biste izbjegli oštećenje komponenti.
  • Držite podalje djecu i kućne ljubimce tokom sastavljanja.
  • Ne stojte na stolici niti je koristite kao stepenicu.
  • Ne prekoračujte maksimalnu nosivost od 136 kg (300 lbs).
  • Regularly check all bolts and screws for tightness and re-tighten as necessary.
  • Use the chair only for its intended purpose as an office chair.

3. Sadržaj paketa

Molimo Vas da provjerite da li su sve sljedeće komponente uključene u Vaš paket:

  • Naslon stolice (1)
  • Jastuk za sjedište (1)
  • Nasloni za ruke (2)
  • Naslon za glavu (1)
  • Cilindrični plinski lift (1)
  • Star Base (1)
  • Kotači (5)
  • Mechanism Plate (1)
  • Hardware Pack (Screws, Washers, Allen Wrench) (1)

4. Upute za sastavljanje

Follow these steps carefully to assemble your Yaheetech Ergonomic Office Chair:

  1. Step 1: Attach Casters to Star Base

    Umetnite svaki od pet kotačića u rupe na kraju svake noge zvjezdaste baze. Čvrsto pritisnite dok ne kliknu na svoje mjesto.

    Close-up of the chair's star base with casters, showing smooth mobility.

    Image: The sturdy star base with smoothly rolling casters, highlighting convenient mobility.

  2. Step 2: Insert Gas Lift into Star Base

    Place the gas lift cylinder into the center hole of the assembled star base. Ensure it is seated firmly.

    Diagram showing various adjustable features of the chair, including the gas lift cylinder and star base.

    Slika: Prekoview of the chair's multifunctional aspects, including the gas lift and stable star base.

  3. Step 3: Attach Mechanism Plate to Seat Cushion

    Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Secure it using the appropriate screws from the hardware pack and the provided Allen wrench. Ensure the front of the mechanism faces the front of the seat.

    Close-up of the chair's adjustment levers and knobs under the seat, showing height and tilt controls.

    Slika: Detaljna view of the seat's adjustment lever for height and the control knob for tilt tension.

  4. Step 4: Attach Armrests to Seat Cushion

    Attach the armrests to the sides of the seat cushion, aligning them with the holes on the mechanism plate. Secure with screws. Note that the armrests are foldable, so ensure they are oriented correctly.

    Two pink office chairs, one with armrests down and another with armrests folded up, demonstrating the 90-degree foldable feature.

    Image: Demonstration of the armrests folding up to a 90-degree angle, allowing the chair to be pushed closer to a desk.

  5. Step 5: Attach Backrest to Seat Assembly

    Connect the backrest to the seat cushion assembly using the remaining screws. Ensure a secure and stable connection.

    Front view of the fully assembled Yaheetech Ergonomic Office Chair in white and pink.

    Image: The complete Yaheetech Ergonomic Office Chair, showcasinnjegov dizajn i komponente.

  6. Korak 6: Pričvrstite naslon za glavu

    Slide the headrest into the designated slots at the top of the backrest. Adjust its height as desired.

    Diagram showing various adjustable features of the chair, including the height-adjustable headrest.

    Slika: Prekoview of the chair's multifunctional aspects, including the adjustable headrest.

5. Uputstvo za upotrebu

Your Yaheetech Ergonomic Office Chair offers several adjustable features to customize your seating experience:

5.1 Podešavanje visine sedišta

To adjust the seat height, pull the lever located on the right side under the seat upwards. While holding the lever, stand up to raise the seat or sit down to lower it. Release the lever at your desired height to lock it in place.

Close-up of the chair's adjustment lever for seat height and rocking function.

Image: The lever under the seat used for adjusting seat height and locking the rocking function.

5.2 Recline/Rocking Function

To enable the rocking function, pull the same lever (used for height adjustment) outwards. To lock the chair in an upright position, push the lever inwards. The tension of the rocking motion can be adjusted by rotating the round knob located under the seat, towards the front. Turn clockwise to increase tension (harder to recline) and counter-clockwise to decrease tension (easier to recline).

Close-up of the chair's adjustment knob for tilt tension.

Image: The control knob under the seat for adjusting the tension of the chair's rocking function.

5.3 Armrest Adjustment (Foldable)

The armrests can be folded upwards by 90 degrees. Simply lift the armrests to raise them. This feature allows the chair to be pushed closer to your desk, saving space when not in use.

Two pink office chairs, one with armrests down and another with armrests folded up, demonstrating the 90-degree foldable feature.

Image: The chair's armrests can be folded up to a 90-degree angle for space-saving convenience.

5.4 Podešavanje naslona za glavu

The headrest can be adjusted vertically to provide optimal neck and head support. Gently push or pull the headrest up or down to your preferred height.

Diagram showing the height-adjustable headrest feature of the ergonomic chair.

Image: The adjustable headrest provides customized support for the head and neck.

5.5 Lumbar Support Adjustment

The flexible lumbar support can be adjusted to align with the natural curve of your lower back. Gently slide the lumbar support mechanism up or down on the backrest to find your most comfortable position.

Diagram illustrating the ergonomic design of the chair, including adjustable lumbar support.

Image: The ergonomic design highlights the adjustable lumbar support for optimal back comfort.

6. Održavanje i njega

  • čišćenje: Za opšte čišćenje, obrišite stolicu mekom,amp cloth. For mesh areas, use a mild soap solution and a soft brush, then wipe with a clean, damp krpom. Izbjegavajte jake hemikalije ili abrazivna sredstva za čišćenje.
  • inspekcija: Povremeno provjeravajte sve vijke i šrafove kako biste bili sigurni da su zategnuti. Po potrebi ih ponovo zategnite kako biste održali stabilnost i sigurnost.
  • Kotačići: Keep the casters clean and free of debris (hair, dust, etc.) to ensure smooth rolling.
  • Izbjegavajte direktnu sunčevu svjetlost: Prolonged exposure to direct sunlight can cause fading or damage to the chair's materials.

7. Otkrivanje problema

ProblemMogući uzrokRješenje
Stolica se klimaLoose screws or boltsCheck and tighten all assembly screws and bolts.
Gas lift not workingLever not engaged properly or gas lift malfunctionEnsure the height adjustment lever is fully engaged. If issue persists, contact customer support.
Chair squeaksLoose connections or friction between partsZategnite sve vijke. Po potrebi nanesite malu količinu silikonskog maziva na pokretne dijelove.
Kotačići se ne kotrljaju glatkoDebris caught in castersUklonite kosu, prašinu ili ostatke s kotačića.

8. Specifikacije

FeatureDetalj
BrandYaheetech
ModelYA-00134064
BojaBijela/ružičasta
MaterijaliPolyester, Sponge, Metal
Ukupne dimenzije (D x Š x V)70 x 70 x 121.5-131.5 cm (27.6 x 27.6 x 47.8-51.8 inches)
Dimenzije sjedišta (Š x D)51 x 50 cm (20.1 x 19.7 inča)
Podesiva visina sedišta45-55 cm (17.7-21.7 inča)
Armrest Height (from ground)64-74 cm (25.2-29.1 inča)
Maksimalni kapacitet opterećenja136 kg (300 lbs)
Težina artikla11.5 kg (25.4 lbs)
Težina isporuke13.5 kg (29.8 lbs)
Detailed specifications table and dimension diagram for the Yaheetech office chair.

Image: A visual representation of the chair's dimensions and a summary of its key specifications.

9. Garancija i podrška

For any questions, concerns, or issues regarding your Yaheetech Ergonomic Office Chair, please contact Yaheetech customer service. Refer to your purchase documentation or the Yaheetech official webstranicu za kontakt podatke i informacije o garanciji.

Posvećeni smo pružanju visokokvalitetnih proizvoda i podrške kako bismo osigurali vaše zadovoljstvo.

© 2024 Yaheetech. Sva prava pridržana.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.