Enhulk EHT21001-L20

Enhulk L2 bežični usisivač za bazen - uputstvo za upotrebu

Model: EHT21001-L20

Marka: Enhulk

1. Uvod

This manual provides instructions for the safe and effective use of your Enhulk L2 Cordless Pool Vacuum. Please read this manual thoroughly before operation and retain it for future reference.

Enhulk L2 Cordless Pool Vacuum with accessories

Image: The Enhulk L2 Cordless Pool Vacuum shown with its main body, vacuum head, telescopic pole, and four filter bags.

2. Sigurnosne informacije

UPOZORENJE:

  • Keep away from children when in use or charging.
  • Do not operate the motor without the vacuum being submerged in water, as this can cause damage. The motor uses water for cooling.
  • Prije spajanja punjača provjerite je li priključak za punjenje suh.
  • Koristite samo isporučeni punjač.

3. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

  • Pool Cleaner (Main Unit) x1
  • 1.5A Charger x1
  • Telescoping Tube x1
  • Filter Bag (500 Mesh) x2
  • Filter Bag (180 Mesh) x2
  • Portable Handle x1
  • Uputstvo za upotrebu x1
Diagram of Enhulk L2 Pool Vacuum package contents

Image: Visual representation of all components included in the Enhulk L2 Pool Vacuum package.

4. Montaža

Slijedite ove korake za sastavljanje usisivača za bazen:

  1. Install Vacuum Head: Align the vacuum head with the main unit and click it into place.
  2. Ugradnja filter vrećice: Select the appropriate filter bag (180 Mesh for fine debris like sand, 500 Mesh for larger debris like leaves). Insert the filter bag into the main pump casing and secure it.
  3. Install Main Pump Casing: Attach the main pump casing to the vacuum head assembly.
  4. Install Portable Handle: Insert the portable handle into the top of the main unit.
  5. Attach Telescoping Pole (Optional): For deeper or larger pools, remove the portable handle and attach the telescoping pole. The pole extends from 3 to 7.3 feet.
Step-by-step assembly guide for Enhulk L2 Pool Vacuum

Image: Visual instructions for assembling the vacuum head, filter bag, main pump casing, and handles.

5. Punjenje baterije

The Enhulk L2 Pool Vacuum is equipped with a 20V rechargeable battery. Ensure the charging port is completely dry before charging.

  • Connect the charger to the charging interface on the vacuum.
  • Uključite punjač u standardnu ​​električnu utičnicu.
  • Potpuno punjenje traje otprilike 1.5 sati.
  • Always charge the vacuum immediately after use to maintain battery health.
Enhulk L2 Pool Vacuum connected to charger

Image: The Enhulk L2 Pool Vacuum being charged via its power adapter.

Indikatorska svjetla baterije:

  • zeleno svjetlo: 50%-100% charge.
  • Zeleno svjetlo treperi: 20%-50% charge.
  • crveno svjetlo: 10%-20% charge.
  • Treperi crveno svjetlo: Filter bag needs cleaning.
Enhulk L2 Pool Vacuum charge level and status indicator

Image: Close-up of the vacuum's indicator lights showing battery level and filter status.

6. Operacija

The Enhulk L2 Pool Vacuum is designed for cleaning various types of pools and spas, including swimming pools, inflatable pools, and hot tubs (max. temp 95°F).

Various pool types suitable for Enhulk L2 Pool Vacuum

Slika: pramples of swimming pools, inflatable pools, hot tubs, and spas where the vacuum can be used.

6.1 Starting the Vacuum

  1. Ensure the vacuum is fully charged and assembled with the desired handle (portable or telescopic pole).
  2. Submerge the vacuum completely into the water.
  3. Press the power switch to turn on the vacuum. The motor must only operate when fully submerged to prevent damage.

6.2 Postupak čišćenja

  • Guide the vacuum along the bottom and sides of the pool. The multi-purpose vacuum head with a 23.5cm/9.25-inch triangled brush is effective for corners and steps.
  • The vacuum is suitable for collecting leaves, small debris, bugs, and sand. Napomena: It is not designed for floating algae.
Enhulk L2 Pool Vacuum cleaning various debris types

Image: The vacuum demonstrating its ability to clean sand, small debris, bugs, and small leaves from a pool floor.

Enhulk L2 Pool Vacuum cleaning corners and steps

Image: The vacuum head effectively cleaning pool corners and steps.

User operating Enhulk L2 Pool Vacuum with telescopic pole

Image: A person using the telescopic pole to clean a pool with the Enhulk L2 Pool Vacuum.

6.3 Stopping and Removing the Vacuum

  1. When cleaning is complete or the battery is low, turn off the vacuum while it is still submerged.
  2. Carefully lift the vacuum out of the water. The quick drain system will release filtered water.
  3. Proceed to the maintenance section for cleaning instructions.
Enhulk L2 Pool Vacuum quick drain system

Image: The vacuum demonstrating its quick drain system, releasing clean water when lifted from the pool.

7. Održavanje

Regular maintenance ensures optimal performance and extends the life of your Enhulk L2 Pool Vacuum.

7.1 Cleaning the Filter Bags

  • After each use, remove the filter bag from the main unit.
  • Ispraznite sav nakupljeni otpad.
  • Rinse the filter bag thoroughly with clean water.
  • Allow the filter bag to air dry completely before re-installing or storing.
  • The flashing red light indicator on the vacuum signals when the filter bag requires cleaning.

7.2 Skladištenje

  • Čuvajte usisivač na hladnom i suvom mestu dalje od direktne sunčeve svetlosti.
  • Ensure the battery is charged before long-term storage.

8. Otkrivanje problema

ProblemMogući uzrokRješenje
Vakuum se ne uključuje.Baterija je prazna.Punite bateriju 1.5 sata.
Smanjena snaga usisavanja.Filterska vrećica je puna ili začepljena.Očistite vrećicu filtera.
Smanjena snaga usisavanja.Debris lodged in vacuum head or pump.Pregledajte i uklonite sve prepreke.
Usisivač se neočekivano zaustavlja.Baterija je prazna.Napunite bateriju.
Motor runs but no water movement.Vacuum not fully submerged.Ensure the vacuum is completely underwater before operating.

9. Specifikacije

FeatureDetalj
Broj modelaEHT21001-L20
Izvor napajanjaBattery Powered
Snaga motora40W
Voltage20 Volts
Vrsta baterijeLithium-Ion (5 x 2000mAh cells)
Lithium Battery Voltage18 Volts
Sadržaj energije litijumske baterije36 vatnih sati
Vrijeme punjenja1.5 sata
RuntimeDo 60 minuta
Max Flow Rate4200 L/h (18.5 gallons/min)
Težina artikla7.66 funte
Dimenzije proizvoda27.56 x 7.87 x 4.72 inča
Dužina teleskopske šipke3 do 7.3 stopa
Filter Bags Included2x 180 Mesh, 2x 500 Mesh
Vacuum Head Width23.5 cm / 9.25 inča

10. Garancija i podrška

The Enhulk L2 Cordless Pool Vacuum comes with a limited warranty. For specific warranty details, please refer to the warranty card included in your package or contact Enhulk customer support.

For technical assistance, troubleshooting not covered in this manual, or to inquire about replacement parts, please visit the official Enhulk website or contact their customer service department. Contact information can typically be found on the product packaging or the Enhulk brand store on Amazon: Enhulk Store.

© 2025 Enhulk. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.