BSIDE O1 Automotive Oscilloscope Multimeter Instruction Manual

1. Proizvod je gotovview

The BSIDE O1 is a versatile 2-in-1 handheld device combining the functionalities of an oscilloscope and a digital multimeter. It features a portable color display, a rechargeable battery, and capabilities for data storage and export. This instrument is designed for accurate measurements in various electrical and automotive applications.

Image 1: The BSIDE O1 device displaying both its oscilloscope and multimeter interfaces on its color screen.

Ključne karakteristike:

• 2-in-1 Oscilloscope Multimeter: Combines a 10MHz bandwidth oscilloscope with a true RMS digital multimeter.
• Portable Color Display: Features a 2.8-inch screen for clear readings.
• Punjiva baterija: Equipped with a 2000mA rechargeable battery and charging cable for extended use.
• Comprehensive Measurement Modes: Mjere AC/DC voltage, AC/DC current, resistance, capacitance, diode, continuity, and V-Alert (non-contact voltage detection).
• Pohranjivanje i izvoz podataka: Allows saving and exporting tested data to a computer or flash drive.
• Dodatne funkcije: Includes MAX/MIN/AVG value measurement, auto-calibration, memory function, and a bright LED flashlight.
• Zaštitna torbica: Comes with a high-quality carrying case for portability and protection.

2. Podešavanje

2.1 Sadržaj paketa

Prije početka, provjerite da li su sve stavke prisutne u paketu:

• 1 x Handheld Oscilloscope Multimeter (BSIDE O1)
• 1 x mjerne žice (crvena i crna)
• 1 x torbica za nošenje
• 1 x Kabl za punjenje
• 1 x Uputstvo za upotrebu

Image 2: The BSIDE O1 Oscilloscope Multimeter shown with its included test leads, charging cable, and user manual.

2.2 Punjenje baterije

The device is powered by a rechargeable 2000mA Lithium Ion battery. Before first use, or when the low battery indicator appears, charge the device using the provided charging cable.

1. Povežite kabl za punjenje sa priključkom za punjenje na uređaju.
2. Connect the other end of the charging cable to a suitable USB power adapter (not included) or a computer USB port.
3. The charging indicator will illuminate, typically red during charging and green when fully charged.

Image 3: The BSIDE O1 device being charged via its charging cable, indicating its rechargeable nature.

2.3 Spajanje mjernih kabela

For multimeter functions requiring direct contact, connect the test leads:

1. Umetnite crni mjerni kabel u ulazni priključak 'COM' (Common).
2. Umetnite crveni mjerni kabel u priključak 'INPUT'.
3. Prije bilo kakvog mjerenja provjerite jesu li spojevi sigurni.

3. Uputstvo za upotrebu

The BSIDE O1 offers both oscilloscope and multimeter modes, accessible via the function buttons and rotary switch.

3.1 Uključivanje/isključivanje napajanja

Pritisnite i držite tipku za napajanje da biste uključili ili isključili uređaj.

3.2 Režim multimetra

Rotate the central dial to select the desired measurement function. The 2.8-inch TFT color display will show the readings.

Image 4: The 2.8-inch TFT color display of the BSIDE O1 showing an AC voltage measurement in multimeter mode.

• Voltage (AC/DC): Select 'V~' for AC voltage ili 'V=' za DC voltage. Connect test leads in parallel to the circuit.
• Struja (AC/DC): Select 'A~' for AC current or 'A=' for DC current. For clamp measurements, open the clamp and enclose a single conductor. For direct current measurement, connect test leads in series with the circuit.
• Otpor (Ω): Select 'Ω'. Connect test leads across the component to measure resistance.
• Kapacitet (F): Select 'F'. Connect test leads across the capacitor.
• Diodni test: Select the diode symbol. Connect test leads across the diode to check its forward voltage drop.
• Test kontinuiteta: Select the continuity symbol. The device will beep if there is a continuous path (low resistance).
• V-Alert (Beskontaktno mjerenje volumenatage Detekcija): Select 'NCV'. Hold the device near a live AC voltage source to detect its presence without physical contact.

3.3 Režim osciloskopa

To enter oscilloscope mode, select the oscilloscope symbol on the rotary switch. The device will display waveforms, allowing for detailed analysis of electrical signals.

Image 5: Various waveform measurements shown on the oscilloscope display of the BSIDE O1, illustrating its signal analysis capabilities.

• Širina pojasa: 10MHz.
• S. u realnom vremenuample Rate: 48MSa/s.
• Kontrole: Use the 'VOL', 'TIME', 'MOVE', 'TRIG', and 'DC' buttons to adjust the waveform display, trigger settings, and vertical/horizontal scales.

3.4 Pohranjivanje i izvoz podataka

The BSIDE O1 allows you to store measurement data and export it for further analysis.

• Sačuvaj: Press the 'SAVE' button to store current measurement data.
• Izvoz: Connect the device to a computer using the charging cable. The stored data can then be accessed and exported. Refer to the on-screen menu for specific export options.

Image 6: The BSIDE O1 displaying icons related to efficient data storage and export functionality.

3.5 Dodatne funkcije

• svjetiljka: Press the flashlight button to activate the built-in LED flashlight for illumination in dark environments.
• MAKS/MIN/PROSJEK: Use the dedicated buttons to view maximum, minimum, and average values during measurements.

Image 7: The BSIDE O1 device with its bright LED flashlight activated, useful for working in low-light conditions.

4. Održavanje

Proper maintenance ensures the longevity and accuracy of your BSIDE O1 device.

• čišćenje: Za čišćenje uređaja koristite meku, suhu krpu. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
• Skladištenje: When not in use, store the device in its provided carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Održavanje baterije: Redovno punite bateriju, čak i ako se uređaj ne koristi često, kako biste održali njeno zdravlje. Izbjegavajte potpuno pražnjenje baterije tokom dužeg perioda.

5. Otkrivanje problema

If you encounter issues with your BSIDE O1, refer to the following common troubleshooting steps:

• Uređaj se ne uključuje: Ensure the battery is sufficiently charged. Connect the charging cable and allow it to charge for at least 30 minutes before attempting to power on again.
• Netačna očitanja: Check that the test leads are correctly connected and not damaged. Ensure the correct measurement mode is selected for the task. For clamp measurements, verify that only a single conductor is enclosed within the clamp.
• Problemi sa prikazom: If the screen is frozen or unresponsive, try restarting the device. If the issue persists, ensure the battery is fully charged.
• Data export failure: Verify the charging cable is securely connected to both the device and the computer. Ensure the computer recognizes the device.

Za uporne probleme koje ovi koraci nisu riješili, obratite se korisničkoj podršci.

6. Specifikacije

7. Jamstvo i podrška

BSIDE proizvodi su proizvedeni po visokim standardima kvalitete. Za informacije o garanciji ili tehničku podršku, molimo pogledajte kontakt podatke koje ste dobili uz kupovinu ili posjetite službenu BSIDE stranicu. webSačuvajte račun kao dokaz o kupovini za reklamacije u slučaju reklamacije.