JONRRYIN ST3946
JONRRYIN 59 Piece Magnetic Building Blocks Race Car Track Set Instruction Manual
Model: ST3946 | Brand: JONRRYIN
1. Uvod
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your JONRRYIN 59 Piece Magnetic Building Blocks Race Car Track Set. Please read this manual carefully before use to ensure proper setup and safe enjoyment of the product.
2. Sigurnosne informacije
Važno: Not suitable for children under 3 years old. This product should be used under the direct supervision of an adult.
- Ensure all small parts are kept away from young children to prevent choking hazards.
- Inspect all components regularly for damage. Discontinue use if any parts are broken or compromised.
- Do not expose magnetic tiles or cars to extreme temperatures or moisture.
- Batteries for the cars are not included. Use only the specified battery type (AA) and ensure correct polarity during installation.
3. Sadržaj paketa
Molimo Vas da provjerite da li su sve sljedeće komponente uključene u Vaš paket:
- 2x Long Straight Track
- 1x Short Straight Track
- 2x Variable Speed Track
- 2x Direction Changing Track
- 4x Height Increase Long Track
- 4x Triangular Magnetic Tiles
- 1x Isosceles Triangle Magnetic Tiles
- 6x Square Magnetic Tiles
- 4x Square One Hole Magnetic Tiles
- 3x Square Four Hole Magnetic Tiles
- 10x Road Signs
- 14x nosač
- 1x Red Car (Requires AA Battery)
- 1x Blue Car (Requires AA Battery)
- 1x engleski priručnik
- 1x mini odvijač

Slika 1: Gotovoview of all 59 included components.
4. Postavljanje i montaža
Follow these steps to assemble your race car track set:
- Pripremite bazu: Begin by arranging the square and triangular magnetic tiles on a flat, stable surface. These will form the foundation and support structures for your track.
- Construct Support Pillars: Use the brackets to create pillars that will elevate sections of the track. Magnetic tiles can be attached to the base of these pillars for stability.
- Spojite dijelove tračnica: Attach the various track pieces (long straight, short straight, variable speed, direction changing, height increase) to form your desired race track layout. The track pieces connect to each other and to the support pillars.

Slika 2: Prample of track piece connection.
- Install Road Signs: Place the road signs along the track to enhance the racing experience. These can be inserted into designated slots on some track pieces or magnetic tiles.
- Pripremite automobile: Each car requires 1 AA battery (not included). Use the mini screwdriver to open the battery compartment, insert the battery with correct polarity, and secure the cover.

Figure 3: Battery installation for the race cars.
- Final Track Configuration: Experiment with different track layouts. The magnetic tiles allow for flexible and creative designs.

Slika 4: Prample of a completed track assembly.
5. Uputstvo za upotrebu
Once the track is assembled and cars have batteries installed:
- Turn on the power switch located on the bottom of each car.
- Place the cars onto the track. Ensure the wheels are properly aligned with the track grooves.
- Observe the cars as they navigate the track. The variable speed tracks and direction changing tracks will add dynamic elements to the race.
- Experiment with different car starting positions and track configurations to discover new racing scenarios.

Figure 5: Cars operating on the track.
6. Održavanje
- čišćenje: Obrišite sve komponente suhom ili blago natopljenom krpomamp tkanina. Ne uranjajte u vodu.
- Skladištenje: When not in use, disassemble the track and store all pieces in their original packaging or a suitable container to prevent loss or damage.
- Održavanje baterije: Remove batteries from the cars if they will not be used for an extended period to prevent leakage.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Auto se ne kreće. | Baterije su prazne ili su nepravilno instalirane. Prekidač za napajanje je isključen. | Replace batteries with new AA batteries, ensuring correct polarity. Turn on the power switch on the car's underside. |
| Car falls off the track. | Track pieces are not securely connected. Track is uneven. Car wheels are not aligned. | Ensure all track connections are firm. Place the track on a flat, stable surface. Verify car wheels are properly seated in the track grooves. |
| Track sections are unstable. | Support pillars or magnetic bases are not properly constructed or connected. | Re-examine the assembly of support pillars and ensure magnetic tiles are firmly attached to the base for stability. |
8. Specifikacije
- Broj modela: ST3946
- Dimenzije proizvoda: 1.97 x 1.18 x 0.79 inches (individual piece dimensions, overall track size varies by assembly)
- Težina artikla: 2.66 funte (ukupna težina paketa)
- Preporučena dob: 3 godina i više
- Battery Requirement (per car): 1x AA baterija (nije uključena)
- Materijal: Child-safe ABS Plastic, Magnets
9. Garancija i podrška
Specific warranty information for this product is not provided in the available data. For any questions, concerns, or support needs regarding your JONRRYIN Magnetic Building Blocks Race Car Track Set, please refer to the retailer's return policy or contact the manufacturer directly through their official channels.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.