Uputstvo za upotrebu kancelarijske stolice Yaheetech Mesh

1. Uvod

Thank you for choosing the Yaheetech Mesh Office Chair. This manual provides essential information for the proper assembly, operation, maintenance, and troubleshooting of your new office chair. Please read this manual thoroughly before assembly and retain it for future reference.

Image: The Yaheetech Mesh Office Chair positioned in a modern home office environment.

2. Sigurnosne informacije

UPOZORENJE:

• Ne prekoračujte maksimalnu preporučenu težinu od 300 funti (136 kg).
• Fold and store the chair safely to prevent injury.
• Prije upotrebe provjerite jesu li svi vijci i šrafovi sigurno zategnuti.
• Držite male dijelove podalje od djece tokom sastavljanja.
• Koristite stolicu na ravnoj, stabilnoj površini.

3. Sadržaj paketa

Prije početka montaže provjerite jesu li sve komponente prisutne i neoštećene.

• Office Chair x 1
• Upute x 1
• Assembly Hardware (screws, hex wrench, etc.)

4. Postavljanje i montaža

Follow these steps to assemble your Yaheetech Mesh Office Chair. For a visual guide, please refer to the assembly video below.

1. Pričvrstite kotačiće na bazu: Umetnite pet kotačića u rupe na kraju svake noge baze stolice. Čvrsto pritisnite dok ne kliknu na svoje mjesto.
2. Umetnite plinski lift: Place the gas lift cylinder into the center hole of the assembled chair base. Ensure it is seated firmly.
3. Assemble Backrest and Armrests: Attach the armrests to the backrest using the provided screws and hex wrench. Ensure the orientation is correct as per the instructions.
4. Attach Backrest/Armrest Assembly to Seat: Secure the assembled backrest and armrests to the underside of the seat cushion using the designated screws.
5. Pričvrstite mehanizam na sjedište: Fasten the control mechanism to the underside of the seat cushion. Pay attention to the front and back orientation of the mechanism, ensuring the adjustment levers face the rear.
6. Spojite sjedište sa plinskim liftom: Carefully place the assembled seat onto the gas lift cylinder. The chair is now ready for use.

Image: Detailed dimensions of the Yaheetech Mesh Office Chair, including height, width, and depth measurements.

5. Uputstvo za upotrebu

Your Yaheetech Mesh Office Chair is designed with multiple adjustable features to provide optimal comfort and support.

• Podesiva visina sjedala: Use the lever located on the right side beneath the seat to raise or lower the chair. Pull the lever up while seated to lower, or pull it up while standing to raise. Release the lever to lock the height.


Image: Close-up of the lever for adjusting seat height and tilt tension.

• Podesiva lumbalna potpora: The chair features a moveable lumbar pillow with an adjustable range of 1.6 inches. Adjust it to fit the curve of your back for optimal support.


Slika: Krupni plan view of the adjustable lumbar support mechanism on the chair's mesh backrest.

• Podizni nasloni za ruke: The armrests can be flipped up by rotating them upwards, allowing the chair to be pushed closer to your desk or stored compactly.


Image: Close-up of the flip-up armrests, showing their rotational movement for space-saving.

• Tilt Tension and Rocking Function: The chair features a 120° tilt tension. Adjust the knob beneath the seat to control the resistance of the rocking motion. Pull the lever out to enable rocking, push it in to lock the upright position.


Image: The office chair illustrating its rocking motion and the convenient tilt tension control knob.

• 360° Swivel and Rolling: The high-grade nylon base and smooth-rolling casters allow for 360-degree rotation and easy movement across various floor surfaces without damage.


Image: Close-up of the durable 360-degree swivel wheels, designed for smooth movement.

6. Održavanje

Proper care will extend the life of your office chair.

• čišćenje: Obrišite oglasomamp krpom. Izbjegavajte jake hemikalije ili abrazivna sredstva za čišćenje.
• Redovne provjere: Povremeno provjeravajte sve vijke i šrafove kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovo zategnite.
• Njega kotačića: Održavajte kotačiće čistim od dlaka i ostataka kako biste osigurali glatko kotrljanje.
• Njega mreže: The breathable mesh back allows air circulation. Avoid sharp objects that could tear the mesh.

7. Otkrivanje problema

Ako imate problema sa stolicom, pogledajte sljedeće uobičajene probleme i rješenja:

• Škripanje stolice: Apply a small amount of silicone lubricant to moving parts, especially where metal components meet. Check and tighten all assembly screws.
• Stolica se ljulja: Ensure all screws are fully tightened. Verify that the gas lift is properly seated in the base and the mechanism.
• Podešavanje visine ne radi: Check if the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may need replacement.
• Kotačići se ne okreću glatko: Remove any hair or debris wrapped around the caster wheels. Clean the wheels and axles.

8. Specifikacije

9. Garancija i podrška

For warranty information, product support, or to purchase replacement parts, please contact Yaheetech customer service directly. Refer to the contact information provided with your purchase or visit the official Yaheetech website.

Također možete posjetiti Yaheetech trgovina na Amazonu za više informacija.