FITE ON VL001 Compatible Adapter

FITE ON 5V USB Adapter for VOLUAS Automatic Pet Feeders

Uputstvo za upotrebu

1. Uvod

This manual provides essential information for the safe and effective use of your FITE ON 5V USB Adapter, designed specifically for VOLUAS automatic pet food dispensers. Please read this manual thoroughly before use and retain it for future reference.

2. Sigurnosne informacije

Da biste osigurali siguran rad i spriječili oštećenja, pridržavajte se sljedećih sigurnosnih smjernica:

  • Ovaj adapter je UL Listed, indicating it meets recognized safety standards.
  • It features Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to prevent damage to the adapter and connected devices.
  • Ne izlažite adapter vodi ili prekomjernoj vlazi.
  • Avoid using the adapter if the cable or plug is damaged.
  • Ensure the adapter is used with compatible devices only (5V input).
  • Unplug the adapter from the wall outlet when not in use for extended periods.
  • Prijedlog 65 Upozorenje: Ovaj proizvod može sadržavati hemikalije za koje država Kalifornija zna da izazivaju rak i urođene nedostatke ili drugu reproduktivnu štetu.
FITE ON 5V USB Adapter with UL and FCC certifications and icons for over current, environmentally friendly, good durable performance, short-circuit protection, and electromagnetic wave protection.
Figure 1: Safety certifications and protection features of the FITE ON 5V USB Adapter.

3. Sadržaj paketa

Provjerite da li vaš paket sadrži sljedeće stavke:

  • 1 x FITE ON Home Wall Charger (5V USB Adapter)
  • 1 x USB Power Cord (3.3ft / 1.0m)
FITE ON 5V USB Adapter and USB power cord, shown alongside various VOLUAS automatic pet feeders to illustrate compatibility.
Figure 2: Included components: the FITE ON 5V USB Adapter and its accompanying USB power cord.

4. Upute za postavljanje

Follow these steps to set up your FITE ON 5V USB Adapter:

  1. Connect the USB-A end of the provided USB power cord into the USB port on the FITE ON wall charger.
  2. Connect the other end of the USB power cord (typically a micro-USB or USB-C, depending on your feeder model) into the power input port of your VOLUAS automatic pet feeder.
  3. Plug the FITE ON wall charger into a standard 100-240VAC wall outlet.
  4. Ensure the pet feeder powers on, indicating a successful connection.
A FITE ON 5V USB Adapter plugged into a wall outlet, connected via a USB cable to a white VOLUAS automatic pet feeder, with a cat sitting nearby.
Figure 3: Proper connection of the FITE ON 5V USB Adapter to a VOLUAS pet feeder and a wall outlet.

5. Uputstvo za upotrebu

The FITE ON 5V USB Adapter operates automatically once connected and plugged into a power source. It provides a stable 5V output to power your compatible VOLUAS automatic pet feeder.

  • The adapter is designed for continuous operation, providing consistent power to your pet feeder.
  • It is compatible with various VOLUAS automatic pet feeders, including models VL001, VL002, VL003, VL004, VL005, VL006, VL007, VL008, VL009, DY001, and DY002.
Four different models of VOLUAS automatic pet feeders, with the FITE ON 5V USB Adapter and cable in the center, demonstrating universal compatibility.
Figure 4: The FITE ON 5V USB Adapter is compatible with a wide range of VOLUAS automatic pet feeder models.

6. Održavanje

The FITE ON 5V USB Adapter requires minimal maintenance:

  • Keep the adapter and cable clean and free from dust. Use a dry, soft cloth for cleaning.
  • Avoid bending or crimping the power cord excessively, as this can damage the internal wires.
  • Adapter čuvajte na hladnom i suhom mjestu kada ga ne koristite.

7. Otkrivanje problema

If you encounter issues with your FITE ON 5V USB Adapter, refer to the following common solutions:

ProblemMogući uzrokRješenje
Pet feeder does not power on.
  • Adapter nije priključen.
  • Zidna utičnica nije aktivna.
  • USB cable is not properly connected.
  • Feeder is incompatible or faulty.
  • Ensure the adapter is fully plugged into a working wall outlet.
  • Testirajte zidnu utičnicu s drugim uređajem.
  • Verify both ends of the USB cable are securely connected.
  • Confirm your pet feeder model is listed as compatible. Test with another compatible 5V adapter if available to rule out feeder issues.
Adapter feels excessively hot.
  • Preopterećenje ili unutrašnji kvar.
  • Loša ventilacija.
  • Immediately unplug the adapter. Do not use if it remains excessively hot.
  • Ensure the adapter is not covered or in an enclosed space.

8. Specifikacije

  • Brand: FITE ON
  • Ulazni voltage: 100-240VAC, 50/60Hz (World Wide Input Voltage)
  • Output Voltage: 5 Volts
  • Dužina kabla: 3.3ft / 1.0m
  • Tip konektora: USB (Type-A for adapter output)
  • Sigurnosne karakteristike: OVP (Preko Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection)
  • Certifikati: UL Listed
  • Kompatibilni uređaji: VOLUAS 4L, 5L, 6L Automatic Cat Feeders (Models: VL001, VL002, VL003, VL004, VL005, VL006, VL007, VL008, VL009, DY001, DY002)

9. Kontakt i podrška

For technical support, warranty inquiries, or further assistance, please contact the manufacturer, FITE ON, through your original purchase platform or their official website.

Please note: Specific warranty terms and conditions may vary based on your region and retailer.

© 2026 FITE ON. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.