Liectroux G7 Robot Vacuum Cleaner

Uvod

The Liectroux G7 is an advanced 4-in-1 robot vacuum cleaner designed to simplify your home cleaning routine. It features vacuuming, sweeping, mopping, and an automatic self-emptying base. Equipped with intelligent laser navigation, app control, and compatibility with voice assistants like Alexa and Google Assistant, the G7 offers a comprehensive and hands-free cleaning experience. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.

Sigurnosna uputstva

Please read all safety instructions carefully before using the appliance and keep this manual for future reference.

• Ne dozvolite djeci ili kućnim ljubimcima da se igraju s robotom. Nadzirite djecu dok robot radi.
• Koristite samo originalni adapter za napajanje i bazu za punjenje koje je isporučio proizvođač.
• Do not use the robot in environments with open flames, flammable or explosive materials.
• Ensure the robot is not exposed to water or other liquids. Do not use it in wet environments.
• Prije čišćenja, uklonite sve labave kablove, male predmete ili lomljive predmete s poda kako biste spriječili njihovo zapetljavanje ili oštećenje.
• Do not use the robot to clean sharp objects, large debris, or liquids.
• Isključite robota i iskopčajte bazu za punjenje prije bilo kakvog održavanja ili čišćenja.
• Do not attempt to repair or modify the robot yourself. Contact authorized service personnel for assistance.

Sadržaj paketa

Prilikom raspakivanja provjerite da li su svi artikli prisutni i u dobrom stanju:

• Liectroux G7 Robot Vacuum Cleaner
• Self-Emptying Charging Base
• Kabl za napajanje
• Bočne četke (2 para)
• Mop Cloth (2 units)
• Disposable Dust Bags (2 units, 1 pre-installed in base)
• Alat za čišćenje
• Daljinski upravljač
• Korisnički priručnik (ovaj dokument)

Komponente proizvoda

Robot Vacuum

The Liectroux G7 robot vacuum features a sleek, round design with a top-mounted LiDAR sensor for precise navigation. It includes a main brush underneath for deep cleaning, two side brushes for edge and corner cleaning, and a water tank for mopping. Various sensors around its perimeter help detect obstacles and prevent falls. The charging contacts on the bottom allow it to connect with the self-emptying base.

Samoprazneća baza

The self-emptying base serves as both a charging station and an automatic dust collection unit. After each cleaning cycle, the robot returns to the base, and the collected dust and debris are automatically transferred from the robot's internal dustbin into a high-capacity disposable dust bag located within the base. This significantly reduces the frequency of manual dustbin emptying.

Setup

1. Raspakivanje

Carefully remove all components from the packaging. Remove any protective films or packing materials from the robot and the charging base.

2. Postavljanje baze za punjenje

Place the self-emptying charging base against a wall in an open area, ensuring there is at least 0.5 meters of clear space on both sides and 1.5 meters in front. Avoid placing it near stairs or in areas with direct sunlight. Plug the power cord into the base and then into a wall outlet.

3. Početna naplata

Place the robot onto the charging base, ensuring the charging contacts align. The robot will begin charging automatically. For the first use, allow the robot to fully charge, which may take several hours.

4. Installing Side Brushes and Mop Cloth

• Turn the robot over. Snap the side brushes into their designated slots.
• Fill the water tank with clean water. Attach the mop cloth securely to the water tank. Slide the water tank into the back of the robot until it clicks into place.

5. Veza s aplikacijom (Wi-Fi)

Download the Liectroux app from your smartphone's app store. Follow the in-app instructions to connect your robot to your home Wi-Fi network. This will enable smart features like mapping, remote control, and scheduling.

Uputstvo za upotrebu

Režimi čišćenja

• automatsko čišćenje: Robot inteligentno mapira vaš dom i sistematski čisti.
• Čišćenje mjesta: Usmjerava robota da intenzivno čisti određeno malo područje.
• Čišćenje zone: Omogućava vam da definišete specifična područja na mapi koja robot treba da čisti.
• Planirano čišćenje: Set specific times and days for the robot to automatically start cleaning.

Korištenje aplikacije

The Liectroux app provides full control over your G7 robot. You can view real-time cleaning maps, set virtual walls or no-go zones, select specific rooms or areas to clean, adjust suction power (4 levels), and control water flow for mopping (3 levels). The app also allows you to schedule cleaning tasks and monitor the robot's status and maintenance alerts.

Voice Control (Alexa/Google Assistant)

The Liectroux G7 is compatible with Amazon Alexa and Google Assistant. Once connected through the app, you can use voice commands to start, stop, or send the robot back to its charging base. Refer to the app's integration guide for specific voice commands.

Carpet Boost Feature

The G7 is equipped with an ultrasonic carpet recognition system. When the robot detects a carpet, it automatically increases its suction power to a maximum level (turbo mode) to ensure a deeper clean. Once it moves off the carpet, the suction power returns to its previous setting.

Održavanje

Regular maintenance ensures the longevity and optimal performance of your Liectroux G7.

1. Emptying the Dustbin/Self-Emptying Base

The self-emptying base automatically transfers dust from the robot's internal bin to a disposable dust bag. These bags have a capacity of up to 60 days of debris. Replace the dust bag in the base when indicated by the app or when full. The robot's internal dustbin should also be checked and cleaned periodically, especially if the self-emptying function is not used or if large debris is collected.

2. Cleaning Main Brush

Remove the main brush cover and the main brush. Use the provided cleaning tool to remove hair and debris tangled around the brush. Clean the brush bearings. Reinstall the main brush and cover.

3. Čišćenje bočnih četki

Periodically check the side brushes for wear or entanglement. Remove any hair or debris. If brushes are worn, replace them with new ones.

4. Čišćenje filtera

Remove the dustbin from the robot and separate the filter assembly. Tap the HEPA filter gently to remove dust. The primary filter can be rinsed with water, but ensure it is completely dry before reinstallation.

5. Čišćenje senzora i kontakata za punjenje

Wipe all sensors (cliff sensors, wall sensor, LiDAR sensor window) and the charging contacts on both the robot and the base with a clean, dry cloth. Dust and debris can interfere with navigation and charging.

6. Mop Cloth Care

After each mopping session, remove the mop cloth and rinse it thoroughly with water. Allow it to air dry completely before reattaching. Do not use strong detergents or bleach on the mop cloth.

Rješavanje problema

If you encounter issues with your Liectroux G7, refer to the table below for common problems and solutions.

Specifikacije

Garancija i podrška

The Liectroux G7 Robot Vacuum Cleaner comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and duration. Typically, a 1-year warranty against manufacturing defects is provided.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact the official Liectroux Brasil seller or visit their authorized service channels. Keep your purchase receipt as proof of purchase for warranty claims.