OWON CM2100 Digital AC/DC Clamp Uputstvo za upotrebu brojila

Uvod

This manual provides essential information for the safe and effective operation of your OWON CM2100 Digital AC/DC Clamp Meter. Please read this manual thoroughly before use and retain it for future reference. The CM2100 is a portable, true RMS clamp meter designed for measuring AC/DC current, AC/DC voltage, resistance, capacitance, diode, and non-contact voltage (NCV).

Sigurnosne informacije

UPOZORENJE: Da biste izbjegli strujni udar ili tjelesne ozljede, pročitajte i razumite sve sigurnosne informacije prije upotrebe ovog proizvoda.

• Uvijek se pridržavajte lokalnih i nacionalnih sigurnosnih propisa.
• Ne koristite mjerač ako izgleda oštećeno ili ako je izolacija oštećena.
• Nemojte nanositi više od naznačenog volumenatage, kako je označeno na brojilu, između terminala ili između bilo kojeg terminala i uzemljenja.
• Budite oprezni kada radite sa voltagiznad 30V AC RMS, 42V peak ili 60V DC. Ovi volumenitagpredstavljaju opasnost od strujnog udara.
• Prije otvaranja poklopca baterije, uklonite mjerne kablove s mjerača.
• Provjerite je li funkcijski prekidač u ispravnom položaju za mjerenje koje se izvodi.
• Nemojte koristiti mjerač u blizini eksplozivnog plina, pare ili prašine.
• Uvijek koristite odgovarajuću ličnu zaštitnu opremu (LZO).

Product Overview i komponente

Familiarize yourself with the various parts of your CM2100 clamp meter before operation.

slika: Detailed diagram of the OWON CM2100 clamp meter, highlighting its key components such as the NCV sensor, pincher head trigger, function selection knob, DCA reset/BLE button, function selector, NCV light, LCD display, numerical lock/backlight switch, capacity/resistance/voltage/frequency/diode/ON-OFF input jack, and common-end jack. Dimensions are also indicated.

• NCV senzor: Detektira beskontaktni volumentage.
• Okidač s pincher glavom: Otvara i zatvara clamp čeljusti.
• Dugme za izbor funkcije: Rotates to select different measurement modes (e.g., V~, V=, A~, A=, Ω, NCV, VFC, Hz%).
• Dugme za resetovanje DCA/BLE: Used for DC current zeroing and Bluetooth (BLE) activation on compatible models (CM2100B).
• Birač funkcija: Toggles between specific functions within a mode (e.g., AC/DC voltage, otpor/kapacitivnost).
• NCV svjetlo: Illuminates to indicate non-contact voltage detekcija.
• LCD ekran: Prikazuje očitanja mjerenja, jedinice i indikatore.
• Numerical Lock/Backlight Switch: Locks the current reading (HOLD) and activates the display backlight.
• Ulazne utičnice: Za spajanje mjernih kabela za volumentage, mjerenja otpora, kapaciteta, diode i kontinuiteta.
• Common-End Jack: The negative (-) input for test leads.

Šta je u kutiji

Upon opening the package, verify that all items listed below are present and undamaged.

slika: Contents of the OWON CM2100 package, including the CM2100 clamp meter, a pair of multimeter test leads (red and black), a small bolt driver, a quick guide, and a soft carrying bag.

1. OWON CM2100 Clamp Meter
2. Multimeter Test Leads (Red and Black)
3. Bolt Driver (for battery compartment)
4. Kratki vodič
5. Meka torba za nošenje

Setup

Instalacija baterije

1. Provjerite je li mjerač ISKLJUČEN.
2. Pronađite odjeljak za baterije na stražnjoj strani mjerača.
3. Use the provided bolt driver to loosen the screw securing the battery cover.
4. Skinite poklopac baterije.
5. Insert the Lithium Metal battery (included) according to the polarity markings inside the compartment.
6. Vratite poklopac baterije i zategnite zavrtanj.

Početno uključivanje

Rotate the function selection knob from OFF to any measurement function to power on the meter. The LCD display will illuminate.

Uputstvo za upotrebu

Odabir funkcije

Rotate the central knob to select the desired measurement function. The meter features an automatic range for most measurements, simplifying operation.

slika: Gotovoview of the OWON CM2100's multiple measurement functions, including Resistance (Ω), NCV, VFC, HOLD, ON/OFF (continuity), LCD, Capacitance, Diode, Overload Protection, Low Battery Alert, Buzzing Prompt, and True RMS. It also highlights the 20000 counts, auto range, AC/DC voltage, and AC/DC current measurement capabilities.

Načini mjerenja

• AC/DC Current Measurement (A~ / A=):

  Rotate the knob to the 'A~' or 'A=' position. Press the trigger to open the clamp jaws and enclose a single conductor. Ensure the conductor is centered within the jaws for accurate readings. The display will show the current value. For DC current, press the DCA Reset button to zero the reading before measurement.

• AC/DC VoltagMjerenje (V~ / V=):

  Insert the red test lead into the VΩHz input jack and the black test lead into the COM jack. Rotate the knob to 'V~' for AC voltage ili 'V=' za DC voltage. Connect the test leads in parallel to the circuit or component to be measured. The display will show the voltage vrijednost.
• Resistance Measurement (Ω):

  Insert test leads as for voltage. Rotate the knob to the 'Ω' position. Connect the test leads across the component. The display will show the resistance value in Ohms (Ω).

• Mjerenje kapacitivnosti:

  Insert test leads as for voltage. Rotate the knob to the 'Ω' position and use the Function Selector button to cycle to capacitance mode (usually indicated by 'nF', 'µF'). Connect the test leads across the capacitor. The display will show the capacitance value.

• Diodni test:

  Insert test leads as for voltage. Rotate the knob to the 'Ω' position and use the Function Selector button to cycle to diode test mode (indicated by a diode symbol). Connect the red lead to the anode and the black lead to the cathode of the diode. The display will show the forward voltage drop.
• Test kontinuiteta:

  Insert test leads as for voltage. Rotate the knob to the 'Ω' position and use the Function Selector button to cycle to continuity mode (indicated by a buzzer symbol). If the resistance is below a certain threshold, the buzzer will sound, indicating continuity.

• Non-Contact VoltagDetekcija e (NCV):

  Rotate the knob to the 'NCV' position. Bring the NCV sensor (top part of the clamp meter) close to an AC voltage source. The NCV light will illuminate, and an audible beep will sound, with increasing frequency as the meter gets closer to the voltage izvor.

• VFC (Variable Frequency Drive) Measurement:

  Rotate the knob to the 'VFC' position. This mode is designed for measuring AC voltage and frequency of variable frequency drives, providing more stable readings in such environments.
• Frequency (Hz%) Measurement:

  Rotate the knob to the 'Hz%' position. This mode measures the frequency of AC signals. Connect test leads as for voltage measurement. The display will show the frequency in Hertz (Hz).

Dodatne funkcije

• HOLD funkcija: Press the HOLD button (often combined with backlight) to freeze the current reading on the display. Press again to release.
• Pozadinsko osvjetljenje: Press and hold the HOLD/Backlight button to activate the display backlight for better visibility in low-light conditions. Press and hold again to turn off.
• Pravi RMS: The CM2100 is a True RMS meter, meaning it accurately measures AC voltage and current for both sinusoidal and non-sinusoidal waveforms.
• Bluetooth Communication (CM2100B model only): If you have the CM2100B model, activate Bluetooth by pressing the BLE button. This allows remote data viewing and instrument control via a compatible smartphone application.

slika: Examples of the OWON CM2100 clamp meter in use, demonstrating capacitance measurement for maintenance, NCV (Non-Contact Voltage) inductive measurement, circuit board resistance measurement, and diode measurement.

Održavanje

Čišćenje

Obrišite mjerač oglasomamp krpu i blagi deterdžent. Ne koristite abrazivna sredstva ili rastvarače. Ulazne terminale držite čistima od prljavštine i vlage.

Zamjena baterije

When the low battery indicator appears on the display, replace the battery promptly to ensure accurate measurements. Refer to the "Battery Installation" section under Setup for instructions.

Skladištenje

If the meter is not used for an extended period, remove the battery to prevent leakage. Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures.

Rješavanje problema

Specifikacije

Garancija i podrška

OWON products are designed for reliability and performance. For warranty information or technical support, please refer to the official OWON webstranicu ili kontaktirajte lokalnog distributera. Sačuvajte račun kao dokaz o kupovini za reklamacije u slučaju garancije.

Za dodatnu pomoć, možete posjetiti OWON Store on Amazon.