HERTZ HZ-HSP1

Hertz HSP1 Plug and Play Front Speaker Kit Instruction Manual

Model: HZ-HSP1

1. Uvod

Thank you for choosing the Hertz HSP1 Plug and Play Front Speaker Kit. This kit is designed to enhance your vehicle's audio experience with high-quality components engineered for optimal performance and easy installation. This manual provides essential information for the proper setup, operation, and maintenance of your new audio system.

The Hertz HSP1 kit includes:

  • Hertz SP4.900 Amplifier
  • Hertz SX 165 NEO Coaxial Speakers
  • Hertz HTHP13 T-Power Harness
Hertz HSP1 Plug and Play Front Speaker Kit components including amplifier, speakers, and harness, shown with a motorcycle in the background.

Figure 1.1: Hertz HSP1 Plug and Play Front Speaker Kit Overview

2. Sigurnosne informacije

Please read all safety instructions before installing or operating this product. Failure to follow these instructions may result in injury or damage to the product or vehicle.

  • Preporučena profesionalna instalacija: Zbog složenosti električnih sistema vozila, preporučuje se profesionalna ugradnja.
  • Isključite bateriju: Uvijek isključite negativni pol akumulatora vozila prije početka bilo kakvih električnih radova kako biste spriječili kratki spoj i strujni udar.
  • Pravilno ožičenje: Ensure all wiring is correctly connected and insulated to prevent shorts, overheating, and potential fire hazards. Use appropriate gauge wires.
  • Montaža: Securely mount all components to prevent them from becoming projectiles in case of sudden stops or accidents.
  • ventilacija: Osigurajte amplifier is mounted in a location with adequate ventilation to prevent overheating.
  • Nivoi glasnoće: Dugotrajno izlaganje visokim nivoima jačine zvuka može uzrokovati oštećenje sluha. Podesite jačinu zvuka na siguran nivo.

3. Proizvod je gotovview

3.1 Hertz SP4.900 Amplifier

The SP4.900 amplifier is a compact and powerful unit featuring an Advanced D-Class (ADC) output stage, providing up to 85% efficiency. It includes Universal Speakers Simulators (USS) to ensure compatibility with head units that have speaker load detection circuits.

Hertz SP4.900 Amplifier, a compact black unit with control knobs and input/output terminals.

Figure 3.1: Hertz SP4.900 Amplifier

3.2 Hertz SX 165 NEO Coaxial Speakers

These SPL Coaxial speakers feature powerful Neodymium magnets, designed for high sound pressure levels and clear audio reproduction. The kit includes a pair of 6.5-inch speakers with both SG and RG grilles.

Pair of Hertz SX 165 NEO 6.5-inch coaxial speakers with black cones and integrated tweeters.

Figure 3.2: Hertz SX 165 NEO Coaxial Speakers

3.3 Hertz HTHP13 T-Power Harness

The HTHP13 T-Power Harness is included for a plug-and-play installation, simplifying the wiring process and ensuring proper connectivity between the amplifier, speakers, and the vehicle's existing audio system.

Hertz HTHP13 T-Power Harness, a bundle of wires with various connectors for plug-and-play installation.

Figure 3.3: Hertz HTHP13 T-Power Harness

4. Sadržaj paketa

Verify that all items are present and in good condition before proceeding with installation:

  • 1x Hertz SP4.900 Amplifier
  • 1x Mounting Bracket for SP4.900 Amplifier
  • 1x Pair of Hertz SX 165 NEO Coaxial Speakers (6.5-inch)
  • 1x Pair of SG Grilles for SX 165 NEO Speakers
  • 1x Pair of RG Grilles for SX 165 NEO Speakers
  • 1x Hertz HTHP13 T-Power Harness
  • Uputstvo za upotrebu (ovaj dokument)

5. Postavljanje i instalacija

This section outlines the general steps for installing your Hertz HSP1 kit. Refer to the fitment diagram and consult a professional installer if you are unsure about any steps.

5.1 Provjere prije instalacije

  1. Read the entire manual before starting.
  2. Provjerite da li je akumulator vozila isključen.
  3. Gather all necessary tools (screwdrivers, wire strippers, crimpers, multimeter, etc.).
  4. Identify suitable mounting locations for the amplifier and speakers, ensuring proper ventilation for the amplifier.

5.2 Instalacija komponenti

The Hertz HSP1 kit is designed for a plug-and-play installation, particularly with the HTHP13 T-Power Harness. The following steps are general guidelines:

  1. Instalacija zvučnika:
    • Carefully remove the existing front speakers from your vehicle.
    • Mount the new Hertz SX 165 NEO Coaxial Speakers in the designated locations. Ensure a secure fit.
    • Connect the speaker wires. The HTHP13 harness will simplify these connections.
  2. Amplifier Mounting:
    • Mount the SP4.900 amplifier using its dedicated mounting bracket in a secure and well-ventilated area. Common locations include under a seat or within a fairing.
  3. Wiring with HTHP13 T-Power Harness:
    • Connect the HTHP13 T-Power Harness to the vehicle's head unit and the SP4.900 amplifier. This harness is designed to integrate seamlessly with your vehicle's existing wiring.
    • Connect the speaker outputs from the amplifier to the SX 165 NEO speakers using the harness.
    • Ensure all power and ground connections are secure and properly fused.
Fitment diagram showing the placement of the SP4.900 amplifier, SX 165 NEO speakers, and HTHP13 T-Power harness within a motorcycle's front fairing.

Figure 5.1: Typical Fitment Diagram for Motorcycle Installation

5.3 Provjere nakon instalacije

  1. Dvaput provjerite sve spojeve na čvrstoću i ispravan polaritet.
  2. Pazite da nijedna žica nije priklještena ili izložena.
  3. Ponovo spojite akumulator vozila.

6. Uputstvo za upotrebu

Once installed, the Hertz HSP1 system is ready for operation. The SP4.900 amplifier offers several adjustments to fine-tune your audio experience.

6.1 Početno napajanje

  1. Turn on your vehicle's ignition and head unit.
  2. The amplifier should power on, indicated by its status LED.
  3. Start with the head unit volume at a low level.

6.2 Amplifier Adjustments (SP4.900)

The SP4.900 amplifier features controls for input level, gain, and crossover settings. These controls are typically located on the side panel of the amplifier.

  • Input Level (HI/LO): Select the appropriate input level based on your head unit's output. The HTHP13 harness is designed for optimal integration.
  • Gain Control (INPUT LEVEL GAIN): Adjust this setting to match the output of your head unit. Start with the gain at minimum and slowly increase it until you achieve clear, undistorted sound at your desired maximum volume. Avoid setting the gain too high, as this can introduce distortion.
  • Crossover Settings (FULL LP HP): The amplifier includes adjustable high-pass (HP) and low-pass (LP) filters. For full-range coaxial speakers like the SX 165 NEO, a full-range setting or a high-pass filter set around 80-100 Hz is often recommended to protect the speakers from low-frequency distortion.
  • B.BOOST: Bass boost control. Use sparingly and adjust carefully to avoid distortion.

Napomena: Make small adjustments and listen carefully to the sound quality after each change. Optimal settings will vary based on your vehicle, personal preference, and music type.

7. Održavanje

Regular maintenance ensures the longevity and optimal performance of your Hertz HSP1 system.

  • čišćenje: Za čišćenje koristite meku, suhu krpu amplifier and speakers. Avoid using harsh chemicals or abrasive cleaners.
  • ventilacija: Osigurajte amplifier's cooling fins remain free of dust and debris to maintain proper heat dissipation.
  • Provjere ožičenja: Periodically inspect all wiring connections for any signs of wear, corrosion, or looseness. Tighten connections as needed.
  • Zaštita životne sredine: Protect components from extreme temperatures, moisture, and direct sunlight, especially if installed in exposed areas.

8. Otkrivanje problema

If you encounter issues with your Hertz HSP1 system, refer to the following common problems and solutions:

ProblemMogući uzrokRješenje
Nema zvuka
  • Kabl za napajanje je odspojen
  • Pregoreo osigurač
  • Žice zvučnika isključene ili kratko spojene
  • Head unit not sending signal
  • Ampspasilac u zaštitnom režimu
  • Check power and ground connections
  • Inspect and replace fuses if necessary
  • Verify speaker wire connections and check for shorts
  • Ensure head unit is on and outputting audio
  • Provjeri amplifier status LED; if in protection, troubleshoot cause (e.g., overheating, short circuit)
Distorted Sound
  • Pojačanje postavljeno previsoko
  • Neispravne postavke ukrštanja
  • Oštećen zvučnik
  • Loš kvalitet signala sa glavne jedinice
  • Smanji amplifier gain
  • Adjust crossover settings (e.g., increase HP filter frequency)
  • Inspect speakers for physical damage
  • Check head unit output and wiring
AmpPregrijavanje
  • Nedovoljna ventilacija
  • Nepravilno impedantno opterećenje
  • Dugotrajna upotreba velikih količina
  • Osigurati amplifier has clear airflow
  • Provjerite podudaranja impedanse zvučnika ampspecifikacije lifiera
  • Smanjite jačinu zvuka ili dozvolite amplifier da se ohladi
Intermittent Sound
  • Slabo ožičenje
  • Neispravan kabl
  • Problemi s vibracijama
  • Check all power, ground, and speaker connections
  • Inspect cables for damage
  • Securely mount all components

If the problem persists after attempting these solutions, contact Hertz customer support or a qualified audio technician.

9. Specifikacije

Key specifications for the Hertz HSP1 Plug and Play Front Speaker Kit components:

9.1 General Kit Specifications

  • Broj modela: HZ-HSP1
  • Težina artikla: Otprilike 9 funti (4.08 kg)

9.2 Hertz SP4.900 Amplifier

  • Izlaz Stage: Advanced D-Class (ADC)
  • Efikasnost: do 85%
  • Karakteristike: Universal Speakers Simulators (USS) for head unit compatibility

9.3 Hertz SX 165 NEO Coaxial Speakers

  • Vrsta komponente: SPL Coaxial
  • Vrsta magneta: Neodimijum
  • Veličina: 6.5 inča

10. Garancija i podrška

Hertz products are manufactured to high-quality standards and are backed by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Hertz website.

For technical support, troubleshooting assistance, or service inquiries, please contact Hertz customer service or your authorized Hertz dealer. You can find contact information and additional resources on the official Hertz webstranica: www.hertz-audio.com

© 2024 Hertz. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.