Powell PAMZN2315

Powell Hamilton Pewter Swivel Counter Stool User Manual

Model: PAMZN2315

Uvod

Thank you for choosing the Powell Hamilton Pewter Swivel Counter Stool. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and optimal use of your new counter stool. This antique-inspired counter stool features a generously padded light grey upholstered seat, a sturdy metal frame in a pewter finish, and a greywash wood backrest, designed for comfort and durability.

Powell Hamilton Pewter Swivel Counter Stool

Slika: Front view of the Powell Hamilton Pewter Swivel Counter Stool, showcasing its design and upholstery.

Sigurnosne informacije

Lista dijelova

Prije početka montaže, provjerite da li su svi dijelovi prisutni i neoštećeni. Ako bilo koji dio nedostaje ili je oštećen, obratite se korisničkoj podršci.

dioOpisKoličina
ASeat Assembly (with upholstered seat and swivel mechanism)1
BBackrest Frame (metal with greywash wood top rail)1
CLeg Assembly (metal frame with footrest)1
DPaket hardvera (vijci, podloške, imbus ključ)1

Upute za postavljanje i montažu

Estimated Assembly Time: 15-30 minutes. Tools Required: Included Allen wrench.

  1. Raspakujte komponente: Pažljivo izvadite sve dijelove iz ambalaže. Postavite ih na meku, čistu površinu kako biste spriječili oštećenja.Unpacked stool components on a floor

    Image: Stool components laid out on a wooden floor, ready for assembly.

  2. Pričvrstite naslon za sjedište: Align the holes on the backrest frame (Part B) with the corresponding holes on the back of the seat assembly (Part A). Insert the provided bolts and washers, and hand-tighten them.Nazad view of assembled stool

    Slika: Stražnja strana view of the assembled stool, showing the lattice backrest and greywash wood top.

  3. Attach Seat Assembly to Leg Assembly: Carefully place the assembled seat and backrest onto the leg assembly (Part C). Ensure the swivel mechanism on the seat aligns with the top of the leg assembly. Secure with the remaining bolts and washers from the hardware pack (Part D). Hand-tighten all connections.
  4. Završno zatezanje: Once all parts are aligned and hand-tightened, use the included Allen wrench to fully tighten all bolts. Do not overtighten.Stool with dimensions

    Slika: Front view of the stool with key dimensions highlighted, including height and width.

  5. Pregledajte: Verify that the stool is stable and all connections are secure before use.

Uputstvo za upotrebu

Funkcija okretanja

The Hamilton Counter Stool features a 360-degree swivel mechanism. To operate, simply rotate the seat in any direction. The swivel mechanism is designed for smooth and quiet rotation, allowing for easy movement and conversation in various settings.

Odozgo view of the stool seat

Slika: Iznad glave view of the stool's upholstered seat and the top of the backrest, illustrating the swivel capability.

Održavanje

Rješavanje problema

ProblemMogući uzrokRješenje
Stolica se ljulja ili je nestabilna.Labavi vijci ili neravan pod.Ensure all assembly bolts are fully tightened. Move the stool to a level surface.
Okretni mehanizam je krut ili bučan.Nedostatak podmazivanja ili nečistoće u mehanizmu.Apply a small amount of silicone-based lubricant to the swivel mechanism. Ensure no debris is obstructing movement.
Ogrebotine na podu.Missing or worn floor protectors.Check the plastic glides on the bottom of the legs. Replace if worn or add felt pads for extra protection.

Specifikacije

Stool height guide for dining, counter, and bar stools

Image: A diagram illustrating recommended stool heights for dining chairs, counter stools, and bar stools, with corresponding table heights.

Garancija i podrška

For warranty information or technical support, please contact Powell customer service. Keep your purchase receipt for any warranty claims.

Visit the official Powell webstranica za više informacija: www.powellcompany.com