Tecno KI8

TECNO Spark 10 5G Smartphone User Manual

Model: KI8

1. Uvod

This manual provides essential information for setting up, operating, and maintaining your TECNO Spark 10 5G smartphone. Please read this guide thoroughly to ensure proper use and to maximize the device's capabilities. The TECNO Spark 10 5G is designed for reliable performance, featuring a 5G processor, a high-resolution camera, and a long-lasting battery.

2. Šta se nalazi u kutiji

Provjerite da li se sve stavke nalaze u pakovanju proizvoda:

  • TECNO Spark 10 5G Smartphone
  • Napajanje 18W
  • Type-C kabel
  • TPU futrola
  • Alat za izbacivanje SIM kartice

3. Izgled uređaja

Front view of TECNO Spark 10 5G smartphone

Slika 3.1: Front view of the TECNO Spark 10 5G smartphone, showing the display and front camera.

Nazad view of TECNO Spark 10 5G smartphone with camera module

Slika 3.2: Nazad view of the TECNO Spark 10 5G smartphone, highlighting the dual rear camera module.

Side view of TECNO Spark 10 5G smartphone showing power and volume buttons

Slika 3.3: Side view of the TECNO Spark 10 5G smartphone, illustrating the placement of the power button and volume controls.

Dno view of TECNO Spark 10 5G smartphone showing ports

Slika 3.4: Dno view of the TECNO Spark 10 5G smartphone, displaying the USB Type-C port, 3.5mm audio jack, and speaker grille.

4. Podešavanje

4.1. Umetanje SIM i SD kartice

  1. Pronađite ladicu za SIM karticu sa strane uređaja.
  2. Insert the provided SIM ejector tool into the small hole on the SIM tray. Press gently until the tray pops out.
  3. Umetnite Nano-SIM karticu(e) i/ili microSD karticu u predviđene utore na ladici. Pazite da zlatni kontakti budu okrenuti prema dolje.
  4. Pažljivo vratite ladicu za SIM karticu u telefon dok ne klikne na svoje mjesto.

4.2. Punjenje uređaja

Before first use, fully charge your TECNO Spark 10 5G. Connect the Type-C cable to the phone's charging port (Figure 3.4) and the 18W power adapter. Plug the adapter into a power outlet. The device supports 18W flash charging, allowing for a 50% charge in approximately 50 minutes.

4.3. Uključivanje / isključivanje napajanja

  • Za uključivanje: Press and hold the Power button (Figure 3.3) until the TECNO logo appears.
  • Za isključivanje: Pritisnite i držite dugme za napajanje, a zatim odaberite "Isključivanje" iz opcija na ekranu.
  • Za ponovno pokretanje: Pritisnite i držite dugme za napajanje, a zatim odaberite "Ponovno pokretanje" iz ponuđenih opcija.

4.4. Čarobnjak za početno podešavanje

Prilikom prvog uključivanja, slijedite upute na ekranu da biste konfigurirali osnovne postavke kao što su jezik, Wi-Fi veza, Google račun i sigurnosne opcije.

5. Upravljanje vašim uređajem

5.1. Prikaz i navigacija

The TECNO Spark 10 5G features a 6.56-inch HD+ Perfect Dot display with a 90Hz refresh rate. This provides smoother scrolling and more fluid animations. Navigate the interface using touch gestures: tap to select, swipe to scroll, pinch to zoom.

5.2. Upotreba kamere

The device is equipped with an Ultra Clear 50MP superior AI rear camera (Figure 3.2). Open the Camera application to access various modes such as Photo, Video, Portrait, and Super Night. The 50MP sensor with F1.6 larger aperture and PDAF (Phase Detection Auto Focus) is designed to capture high-quality images in diverse lighting conditions, including vivid and clear Super Night shots with RAW domain noise reduction algorithm.

5.3. Performanse i pohrana

Powered by a 7nm Dimensity 6020 processor with two Arm Cortex-A76 cores clocked at 2.2GHz, the phone offers efficient performance. It includes 4GB of physical RAM, expandable with up to 4GB of customizable memory fusion RAM for enhanced multitasking. The UFS 2.2 internal storage provides up to 64GB of space, further expandable via a dedicated 1TB SD card slot.

5.4. Upravljanje baterijom

The 5000mAh battery provides extended usage, with up to 39 days of standby time. To optimize battery life, manage background applications, reduce screen brightness, and enable power-saving modes when necessary.

5.5. Povezivanje

The TECNO Spark 10 5G supports 10 5G bands, Dual 5G Dual active, and Carrier Aggregation for high-speed data connectivity. It also includes 2.4G and 5G Wi-Fi, Bluetooth, and USB connectivity. For audio, a 3.5mm audio jack is available (Figure 3.4).

6. Održavanje

6.1. Ažuriranja softvera

Redovno provjeravajte i instalirajte ažuriranja softvera kako biste osigurali da vaš uređaj ima najnovije funkcije, sigurnosne zakrpe i poboljšanja performansi. Idite na Postavke > Sistem > Ažuriranje sistema da provjerite dostupna ažuriranja.

6.2. Čišćenje uređaja

Use a soft, lint-free cloth to clean the screen and body of your phone. Avoid using harsh chemicals or abrasive materials, which can damage the device's finish. For stubborn smudges, slightly dampOperite krpu vodom ili sredstvom za čišćenje ekrana namijenjenim za elektroniku.

6.3. Održavanje baterije

To prolong battery lifespan, avoid exposing the device to extreme temperatures. Do not let the battery completely drain frequently. Use only the provided charger and cable for optimal charging performance.

7. Otkrivanje problema

Ako naiđete na probleme s uređajem, pogledajte sljedeća uobičajena rješenja:

  • Uređaj se ne uključuje: Provjerite je li baterija napunjena. Spojite punjač i pričekajte nekoliko minuta prije nego što ponovo pokušate uključiti uređaj.
  • Loša mrežna povezivost: Check if your SIM card is correctly inserted. Try restarting the device. Verify that mobile data or Wi-Fi is enabled and that you are within network coverage.
  • Rušenje/zamrzavanje aplikacija: Close and reopen the application. If the issue persists, clear the app's cache (Settings > Apps > [App Name] > Storage > Clear cache). Restarting the phone can also resolve many software glitches.
  • Niska jačina zvuka: Check the volume settings for media, calls, and alarms. Ensure the speaker grille (Figure 3.4) is not obstructed or dirty. If using headphones, ensure they are properly connected.
  • Spore performanse: Close unnecessary background applications. Clear cached data regularly. Consider uninstalling unused apps to free up storage space.

For persistent issues, consult the official TECNO support resources or contact customer service.

8. Specifikacije

FeatureSpecifikacija
Broj modelaKI8
Operativni sistemAndroid 13.0
Procesor7nm Dimensity 6020 (2.2 GHz CPU Speed)
RAM4 GB (Expandable with 4GB Memory Fusion)
Interna pohrana64 GB UFS 2.2 (Expandable up to 1TB via SD card)
Display6.56-inch HD+ Perfect Dot Display, 90Hz Refresh Rate
Rezolucija1280 x 720
Zadnja kamera50MP Dual Rear Camera (F1.6 Aperture, PDAF)
Baterija5000mAh
Punjenje18W Flash Charger (Type-C)
Povezivanje5G (10 bands), Dual 5G Dual Active, Wi-Fi (2.4G, 5G), Bluetooth, USB
Audio Jack3.5 mm
Dimenzije16.4 x 7.5 x 0.8 cm
Težina193 g
BojaMeta White

9. Garancija i podrška

9.1. Informacije o garanciji

The TECNO Spark 10 5G smartphone comes with a 1-godišnja garancija proizvođača from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.

9.2. Podaci o proizvođaču

Proizvođač: G Mobiles India, Ismartu India Private Limited, D-197 and 198, Sector 63, Noida, Gautam Buddha Nagar, Uttar Pradesh 201301

uvoznik: G-Mobile Devices Private Limited, Unit No. B 301, Third Floor Tower B Plot no 7, Sec - 142, Noida, Uttar Pradesh PIN - 201301

9.3. Korisnička podrška

For further assistance, technical support, or warranty claims, please refer to the official TECNO webstranicu ili kontaktirajte njihovu korisničku službu. Također možete posjetiti Tecno trgovina na Amazonu za više informacija o proizvodu i resurse podrške.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.