Uputstvo za upotrebu kućišta računara darkFlash Aquarius Mesh

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your darkFlash Aquarius Mesh Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use of your new computer chassis.

2. Sigurnosne informacije

Uvijek poštujte sljedeće sigurnosne mjere:

• Disconnect all power sources before installing or removing any components.
• Nosite antistatičku narukvicu kako biste spriječili oštećenje komponenti usljed elektrostatičkog pražnjenja (ESD).
• Pažljivo rukujte komponentama kako biste izbjegli fizička oštećenja.
• Držite male dijelove i alat podalje od djece.
• Ensure proper ventilation around the computer case.

3. Sadržaj paketa

Provjerite da li se sve stavke nalaze u vašem paketu:

• darkFlash Aquarius Mesh Computer Case
• Accessory Box (screws, standoffs, cable ties, etc.)
• Korisnički priručnik (ovaj dokument)

4. Postavljanje i instalacija

Follow these steps for proper component installation.

4.1. Priprema slučaja

Before installing components, remove the side panels. The Aquarius Mesh case typically features a tempered glass side panel and a solid metal panel.

1. Locate the thumbscrews on the rear of the case securing the side panels.
2. Unscrew the thumbscrews and carefully slide the panels backward, then lift them off.

Slika 1: Prednja i bočna strana view of the darkFlash Aquarius Mesh case. Note the mesh front panel and tempered glass side panel.

Slika 2: Pozadi view of the darkFlash Aquarius Mesh case, showing expansion slots and rear fan mount.

4.2. Instalacija matične ploče

The Aquarius Mesh supports ATX, Micro-ATX, and Mini-ITX motherboards.

1. Instalirajte I/O štitnik u izrez na stražnjoj strani kućišta.
2. Align your motherboard with the pre-installed standoffs. Ensure the I/O ports align with the I/O shield.
3. Pričvrstite matičnu ploču odgovarajućim vijcima iz kutije s priborom.

Slika 3: Unutrašnjost view of the darkFlash Aquarius Mesh case, highlighting the motherboard tray and cable routing options.

4.3. Instalacija jedinice za napajanje (PSU)

The PSU mounts at the bottom rear of the case.

1. Slide the PSU into its designated compartment from the rear of the case.
2. Align the screw holes and secure the PSU with screws.

4.4. Instalacija pogona za pohranu podataka

The case provides mounting options for 3.5-inch HDDs and 2.5-inch SSDs.

• 3.5" tvrdi diskovi: Locate the drive cage usually beneath the PSU shroud or behind the motherboard tray. Slide the HDD into the bay and secure it with screws.
• 2.5" SSD diskovi: Mount SSDs to dedicated brackets behind the motherboard tray or on the PSU shroud. Secure with screws.

Slika 4: Zadnji unutrašnji dio view of the darkFlash Aquarius Mesh case, showing the motherboard cutout and potential SSD mounting points.

4.5. Expansion Card Installation (e.g., GPU)

1. Uklonite potrebne poklopce za utore za proširenje sa stražnje strane kućišta.
2. Insert the expansion card into the appropriate PCIe slot on the motherboard.
3. Secure the card with the provided screws or retention clips.

4.6. Upravljanje kablovima

Iskoristite izreze za usmjeravanje kablova i tačke za vezivanje iza ležišta matične ploče da biste organizovali kablove. Ovo poboljšava protok vazduha i estetiku.

4.7. Reassembling the Case

Once all components are installed and cables are managed:

1. Carefully reattach the side panels, ensuring they slide into place correctly.
2. Secure the side panels with the thumbscrews.

5. Uputstvo za upotrebu

After assembly, connect your peripherals and power cable.

1. Connect your monitor, keyboard, mouse, and other peripherals to the motherboard's I/O ports.
2. Spojite kabel za napajanje na PSU i zidnu utičnicu.
3. Press the power button located on the top panel of the case to start your computer.

Slika 5: Vrh view of the darkFlash Aquarius Mesh case, showing the front I/O panel with power button, reset button, USB ports, and audio jacks.

6. Održavanje

Redovno održavanje pomaže u osiguravanju optimalnih performansi i dugotrajnosti komponenti vašeg računara.

• Filteri za prašinu: The Aquarius Mesh case features removable dust filters (e.g., on the front, top, and bottom). Regularly remove and clean these filters with water and mild soap, or by vacuuming, to maintain good airflow. Ensure they are completely dry before reinstallation.
• Čišćenje unutrašnjosti: Periodically open the case and use compressed air to remove dust buildup from fans, heatsinks, and other components.
• Eksterijerno čišćenje: Obrišite vanjske površine mekom krpom, damp tkanina. Izbjegavajte jake hemikalije.

7. Otkrivanje problema

Ako naiđete na probleme, razmotrite sljedeća uobičajena rješenja:

• Nema napajanja:
  • Provjerite je li prekidač za napajanje u položaju 'UKLJUČENO'.
  • Provjerite sve priključke za napajanje na matičnoj ploči i komponentama.
  • Verify the power cable is securely plugged into the wall outlet and PSU.
• Ventilatori se ne okreću:
  • Check fan connections to the motherboard or fan controller.
  • Ensure fans are not obstructed by cables or dust.
• U/I na prednjoj ploči ne radi:
  • Verify that the front panel connectors (USB, audio, power/reset switches) are correctly connected to the motherboard headers. Refer to your motherboard manual for header locations.

8. Specifikacije

9. Garancija i podrška

Za informacije o garanciji ili tehničku podršku, molimo pogledajte službenu stranicu darkFlash-a. webweb-mjesto ili kontaktirajte njihovu korisničku službu. Sačuvajte dokaz o kupovini za slučaj reklamacije.

Za dodatnu pomoć, možete posjetiti darkFlash official website.