LFF Atomic Clock LWC205 User Manual

1. Uvod

Hvala na kupoviniasing the LFF Atomic Clock LWC205. This digital clock features a large, easy-to-read display, atomic time synchronization, indoor and outdoor temperature monitoring, and an alarm function. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.

Image 1.1: The LFF Atomic Clock LWC205 main unit and its accompanying wireless outdoor sensor.

2. Proizvod je gotovview

2.1 Elementi prikaza

Image 2.1: Detailed diagram illustrating the various display elements and control buttons on the LFF Atomic Clock LWC205. Key features include the alarm clock icon, time display, RCC reception icon, DST symbol, outdoor temperature, indoor temperature, date, and weekday.

2.2 Control Buttons (Rear View)

The control buttons are located on the back of the main clock unit:

• Dugme SET: Koristi se za unos i potvrdu postavki.
• Dugme ALARM: Koristi se za podešavanje i aktiviranje/deaktiviranje alarma.
• Dugme KANAL: Used to select the outdoor sensor channel (if multiple sensors are used).
• DOWN/WAVE/°C/°F Button: Used to decrease values during setting, manually initiate atomic time synchronization (wave), or switch between Celsius and Fahrenheit.
• UP/ALARM Button: Used to increase values during setting or activate/deactivate the alarm.

3. Podešavanje

3.1 Raspakivanje

Carefully remove all components from the packaging. Ensure you have the main atomic clock unit and the wireless outdoor sensor.

3.2 Instalacija baterije

Both the main clock unit and the wireless outdoor sensor require batteries (not included).

1. Glavna jedinica sata: Open the battery compartment on the back of the clock. Insert 3 x AA baterije, pazeći na ispravan polaritet (+/-).
2. Bežični vanjski senzor: Open the battery compartment on the back of the sensor. Insert 2 x AAA baterije, ensuring correct polarity (+/-). For temperatures below -4°F (-20°C), lithium batteries are recommended for the outdoor sensor.

Image 3.1: Instructions for installing 3xAA batteries in the main clock unit and 2xAAA batteries in the wireless outdoor sensor.

3.3 Postavljanje senzora

Place the wireless outdoor sensor in a shaded, dry location away from direct sunlight and precipitation. The sensor has a wireless range of up to 330 feet (100 meters) from the main unit. Ensure there are no major obstructions between the sensor and the clock for optimal signal transmission.

Image 3.2: Illustration of the 330ft wireless range between the main clock unit and the outdoor temperature sensor.

3.4 Clock Placement

The LFF Atomic Clock LWC205 offers two placement options:

• Table Clock: Use the integrated stand on the back of the unit to place it on a desk, nightstand, or shelf.
• Wall Clock: Utilize the keyhole slot on the back of the unit to mount it securely on a wall.

Image 3.3: The LFF Atomic Clock can be placed on a table using its built-in stand or mounted on a wall.

4. Uputstvo za upotrebu

4.1 Atomic Time Synchronization (WWVB)

The clock automatically synchronizes with the WWVB radio broadcast from Fort Collins, Colorado, ensuring accurate time. This process typically occurs overnight. For best reception, place the clock near a window and away from electronic interference.

Image 4.1: The atomic clock automatically corrects its time daily by receiving the WWVB signal, covering eight time zones and adjusting for Daylight Saving Time.

4.2 Ručno podešavanje vremena i datuma

In areas where the WWVB signal is weak or unavailable, you can manually set the time and date:

1. Pritisnite i držite SET dugme za ulazak u režim podešavanja vremena.
2. Koristite UP or DOLJE tipke za podešavanje trepćuće vrijednosti (npr. sat, minuta, godina, mjesec, dan).
3. Pritisnite SET dugme za potvrdu svake postavke i prelazak na sljedeću.
4. The clock will exit setting mode automatically after a few seconds of inactivity or by pressing SET repeatedly until all settings are confirmed.

4.3 Temperature Display (°C/°F)

The clock displays both indoor and outdoor temperatures. To switch between Celsius (°C) and Fahrenheit (°F):

• Pritisnite DOWN/WAVE/°C/°F button to toggle the temperature unit.

4.4 Format 12/24 sata

Za prebacivanje između 12-satnog i 24-satnog formata vremena:

• Pritisnite UP dugme za prebacivanje između 12-satnog (sa indikatorom AM/PM) i 24-satnog formata.

4.5 Funkcija alarma

Za postavljanje alarma:

1. Pritisnite ALARM jednom pritisnite dugme da biste prikazali trenutno vrijeme alarma.
2. Pritisnite i držite ALARM dugme za ulazak u režim podešavanja alarma.
3. Koristite UP or DOLJE dugmad za podešavanje sata i minuta.
4. Pritisnite ALARM dugme za potvrdu svake postavke.

Za aktiviranje/deaktiviranje alarma:

• Pritisnite ALARM button repeatedly to cycle through alarm ON/OFF states. An alarm icon will appear on the display when activated.

5. Održavanje

5.1 Zamjena baterije

When the low battery indicator appears on the display, replace the batteries in the respective unit (main clock or outdoor sensor) promptly to ensure continuous operation and accurate readings. Refer to Section 3.2 for battery types and installation.

5.2 Čišćenje

Clean the clock and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the display or casing.

5.3 Razmatranja životne sredine

The outdoor sensor is designed for outdoor use but should be protected from extreme weather conditions. The recommended operating temperature range for the outdoor sensor is -58°F to 158°F (-50°C to 70°C). For temperatures below -4°F (-20°C), lithium batteries are required in the outdoor sensor for reliable performance.

6. Otkrivanje problema

• Nema prikaza / Slab prikaz: Check battery installation and replace with fresh batteries if necessary. Ensure correct polarity.
• Nema očitavanja vanjske temperature:
  1. Provjerite da li su baterije ispravno instalirane u vanjskom senzoru.
  2. Verify the sensor is within the 330ft wireless range of the main unit.
  3. Pritisnite CHANNEL button on the main unit to ensure it is on the correct channel (if applicable).
  4. Relocate the sensor or main unit to improve signal reception, avoiding large metal objects or other electronic devices.
• Netačno vrijeme:
  1. Ensure the clock is attempting to receive the WWVB signal (look for the RCC reception icon).
  2. Place the clock near a window and away from electronic interference for better signal reception.
  3. Manually initiate a signal search by pressing the DOWN/WAVE dugme.
  4. If atomic synchronization fails, manually set the time as described in Section 4.2.
• Temperature Readings Seem Inaccurate:
  1. Ensure the outdoor sensor is placed in a shaded area, away from direct sunlight or heat sources.
  2. Check battery levels in both units.

7. Specifikacije

8. Informacije o garanciji

Warranty information was not provided in the product data. Please refer to the product packaging or contact the manufacturer directly for details regarding warranty coverage and terms.

9. Korisnička podrška

For further assistance or inquiries, please contact LFF customer support. Contact details were not provided in the product data. Please refer to the product packaging or the official LFF webstranica za kontakt informacije za korisničku podršku.