Kanto DML1000 Single Monitor Desktop Arm

Uvod

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Kanto DML1000 Single Monitor Desktop Arm. Please read this manual thoroughly before installation and retain it for future reference.

Važne informacije o sigurnosti

UPOZORENJE: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact Kanto Customer Support.

• Do not install this product if the desk surface is not structurally sound or if there are hidden obstructions such as electrical wiring or plumbing.
• Ensure the monitor weight and size are within the specified limits (17" to 34" monitors, up to 22.1 lbs / 10 kg). Exceeding these limits may result in instability and potential injury.
• Always use two people for lifting and positioning the monitor during installation to prevent injury.
• Tighten all screws firmly but do not overtighten. Overtightening can damage the screws or the mounting surface.
• Sve male dijelove i materijale za pakovanje držite van dohvata djece.

Sadržaj paketa

Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Kanto Customer Support.

Slika: Prekoview of the Kanto DML1000 monitor stand and its main components.

Vaš paket treba sadržavati:

• Sklop kraka za monitor
• Desk Clamp Skupština
• Okov za montažu ušica
• VESA Monitor Plate
• Obujmice za upravljanje kablovima
• Assorted Screws and Washers for Monitor Attachment
• Hex Keys for Adjustment

Postavljanje i instalacija

The DML1000 offers two installation methods: desk clamp and grommet mount. Choose the method best suited for your desk.

1. Radni sto Clamp Instalacija

1. Pričvrstite sto clamp to the main pole of the monitor arm.
2. Position the monitor arm assembly on the edge of your desk. Ensure the desk thickness is between 0.4" and 2.8" (10mm and 70mm).
3. Zategnite clamp screw until the arm is securely fastened to the desk. Do not overtighten.

2. Ugradnja nosača ušica

1. If your desk has a grommet hole, insert the grommet bolt through the hole from the top.
2. From underneath the desk, attach the grommet plate and tighten the nut onto the bolt until the arm is secure.

3. Pričvršćivanje monitora

The DML1000 features a detachable VESA monitor plate for easier installation.

Image: VESA mounting plate showing 75mm and 100mm hole patterns.

Image: Illustration of the detachable monitor plate and desk clamp/opcije montaže ušica.

1. Remove the VESA plate from the monitor arm by sliding it upwards.
2. Attach the VESA plate to the back of your monitor using the appropriate screws and washers provided. Ensure your monitor has VESA 75x75mm or 100x100mm mounting holes.
3. With assistance, carefully slide the monitor (with the attached VESA plate) onto the monitor arm until it clicks securely into place.

Uputstvo za upotrebu

The DML1000 allows for various adjustments to achieve an ergonomic viewing iskustvo.

Podešavanje visine

Image: Monitor arm showing the height adjustment lever and 360° rotation capability.

To adjust the monitor height, loosen the toolless lever on the main pole. Move the monitor arm up or down to your desired height (between 5.1" and 16.7" / 13cm and 42cm from the desk surface). Tighten the lever firmly to secure the position.

Tilt and Swivel Adjustment

Image: Monitor arm illustrating 180° swivel left or right and tilt mechanism from +90° to -80°.

The monitor can be tilted from +90° to -80° and swiveled 180° left or right. Gently adjust the monitor to your preferred viewing angle. Use the provided hex key to adjust the tension of the tilt mechanism if the monitor is too loose or too stiff.

Rotacija

Image: A monitor mounted on the DML1000 in portrait orientation, demonstrating 360° rotation.

The monitor can be rotated 360° to switch between landscape and portrait orientations. Simply turn the monitor gently to achieve the desired orientation.

Cable Management

The DML1000 includes cable management clips to keep your workspace tidy and reduce clutter.

Image: Close-up of the monitor arm showing cables routed through the integrated cable management clips.

Route your monitor and power cables through the clips located along the arm and down the main pole. This helps to organize cables and maintain a clean aesthetic.

Održavanje

• čišćenje: Obrišite nosač monitora mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
• Periodične kontrole: Povremeno provjeravajte sve vijke i spojeve kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovo zategnite.
• podmazivanje: No lubrication is required for the moving parts.

Rješavanje problema

• Monitor se uvija ili ne drži položaj: Ensure the VESA plate screws are tight. For tilt adjustment, use the provided hex key to increase the tension on the tilt mechanism. For height adjustment, ensure the lever on the main pole is fully tightened.
• Arm is unstable: Provjerite da li je stol čistamp or grommet mount is securely fastened to the desk. Ensure the desk surface is stable and can support the weight of the monitor and arm.
• Difficulty rotating monitor: Ensure no cables are snagged or preventing movement.

Specifikacije

Informacije o garanciji

The Kanto DML1000 is backed by a Five Year Manufacturer's Warranty. For specific terms and conditions, please refer to the warranty card included with your product or visit the official Kanto website.

Korisnička podrška

If you encounter any issues or have questions regarding your Kanto DML1000 monitor arm, please contact Kanto Customer Support for assistance.

Webstranica: www.kantoaudio.com

Email: Refer to Kanto's official webstranica za kontakt informacije za podršku.

Telefon: Refer to Kanto's official webstranica za kontakt informacije za podršku.