Yaheetech Double Metal Bed Instruction Manual

1. Uvod

Thank you for choosing the Yaheetech Double Metal Bed. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

2. Sigurnosne informacije

Važna sigurnosna upozorenja:

• When assembling the metal bed, be aware of potential sharp edges or pinch points.
• The stability of the bed depends on correct assembly. Ensure all connections are secure.
• Ne prekoračujte maksimalnu nosivost 272 kg (600 lbs).
• Držite djecu podalje od mjesta za sastavljanje.
• Koristite samo isporučeni hardver. Zamjena dijelova može ugroziti sigurnost.

3. Spisak komponenti

Prije sastavljanja, provjerite jesu li svi dijelovi prisutni i neoštećeni. Ako bilo koji dio nedostaje ili je oštećen, obratite se korisničkoj podršci.

4. Upute za sastavljanje

Procijenjeno vrijeme montaže: 45-60 minuta. Preporučuju se dvije osobe za lakše sastavljanje.

Korak 1: Raspakujte i identificirajte dijelove

Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Identify each part using the components list.

Korak 2: Sastavite uzglavlje i podnožje kreveta

Attach the side rails to the headboard and footboard using the provided bolts and Allen key. Ensure all connections are finger-tight before fully tightening.

Figure 1: Fully assembled bed frame, showing headboard and footboard design.

Step 3: Install Support Legs

Attach the central support legs to the main frame. These legs provide additional stability and weight distribution.

Figure 2: Illustration of reinforced supports, highlighting the 10 robust legs for stability.

Step 4: Secure Metal Slats

Insert the metal slats into the designated slots on the side rails. Ensure each slat is firmly seated to provide proper mattress support. Some slats may require aligning the iron tube with the notch and pressing firmly to fix.

Figure 3: Detail showing how to align the iron tube with the notch and press to secure the slats.

Figure 4: L-plate fixation for enhanced stability of the bed frame.

Korak 5: Završno zatezanje

Once all parts are in place, go back and fully tighten all bolts. Do not overtighten. Ensure the bed frame is stable and does not wobble.

5. Uputstvo za upotrebu

This bed frame is designed to accommodate a standard 140x200cm mattress. Simply place your mattress on top of the assembled metal slats. The elevated headboard and footboard help keep the mattress securely in place.

Figure 5: Dimensional diagram of the bed frame, indicating compatibility with a 140x200cm mattress and a maximum weight capacity of 272kg.

The bed frame offers 32.5 cm of clearance underneath, providing additional storage space for items like shoes or suitcases.

Slika 6: View of the under-bed storage space, demonstrating its utility for storing boxes or other items.

6. Održavanje

• čišćenje: Obrišite metalni okvir mekom,amp krpom. Izbjegavajte abrazivna sredstva za čišćenje ili jake hemikalije koje bi mogle oštetiti praškasto premazani premaz.
• Redovni pregled: Povremeno provjeravajte sve vijke i spojeve kako biste bili sigurni da su ostali čvrsto zategnuti. Po potrebi ih ponovo zategnite kako biste održali stabilnost i spriječili škripanje.
• Protection Pads: The bed frame is equipped with anti-slip protection pads on the bottom of the legs to protect your floor from scratches and reduce potential sliding. Ensure these pads are intact.


Figure 7: Detail of the anti-slip protection pads located at the base of the bed legs.

7. Otkrivanje problema

• Škripanje kreveta: If the bed squeaks, check all bolts and connections. Tighten any loose fasteners. Ensure the mattress is properly seated on the slats.
• Nestabilnost/Klimanje: Verify that all support legs are firmly on the ground and that all connections are fully tightened. Ensure the bed is on a flat, level surface.
• Klizanje madraca: The elevated headboard and footboard are designed to prevent mattress sliding. If your mattress still slides, consider using a non-slip mattress pad between the mattress and the slats.

8. Specifikacije

9. Garancija i podrška

Za informacije o garanciji ili korisničku podršku, molimo pogledajte dokumentaciju koja je priložena uz vašu kupovinu ili kontaktirajte Yaheetech direktno putem njihovog službenog webweb-mjestu ili prodavaču gdje je proizvod kupljen.

Kontakt informacije:

• Visit the Yaheetech Brand Store: Yaheetech trgovina na Amazonu
• Za kontakt podatke prodavca pogledajte račun.