Atmosphera Jily Pendant Lamp D48 cm User Manual

1. Uvod i sigurnosne informacije

Thank you for choosing the Atmosphera Jily Pendant Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Važna sigurnosna upozorenja:

• Always disconnect the power supply at the main circuit breaker before attempting any installation, maintenance, or bulb replacement.
• Installation must be performed by a qualified electrician or a competent person in accordance with local electrical codes.
• Securely fasten the pendant lamp to the ceiling using appropriate and robust mounting hardware suitable for the ceiling material.
• Izbjegavajte izlaganje lamp to moisture or direct water contact to prevent damage and electrical hazards.
• Nemojte prekoračiti maksimalnu snagutage specificirano za sijalicu (40W).
• Ensure the light bulb is fully cooled before attempting to replace it.

2. Šta se nalazi u kutiji

Carefully unpack the contents and ensure all items are present and undamaged. If any parts are missing or damaged, do not proceed with installation and contact customer support.

• 1 x Jily Pendant Lamp Assembly (including shade, cable, and ceiling canopy)

Note: Light bulb (E27, max 40W) and mounting hardware for the ceiling are not included and must be purchased separately.

3. Postavljanje i instalacija

This section outlines the general steps for installing your pendant lamp. Always refer to the safety warnings in Section 1 before beginning.

Potreban alat (nije uključen):

• Odvijač (Phillips i/ili ravni)
• Skidači žice
• Drill (if required for ceiling mounting)
• Olovka
• Ljestve
• Voltage Tester

Koraci instalacije:

1. Isključite napajanje: Locate the main circuit breaker and turn off the power to the circuit where you will be installing the lamp. Verify the power is off using a voltage tester.
2. Pripremite plafon: If replacing an existing fixture, carefully remove it. Ensure the ceiling junction box is secure and capable of supporting the lamp's weight (approximately 1.08 kg).
3. Mount Ceiling Canopy Bracket: Attach the mounting bracket (usually included with the lamp, inside the canopy) to the ceiling junction box using appropriate screws. Ensure it is firmly secured.
4. Podesite dužinu kabla: The cable length is approximately 90 cm. Adjust the cable to your desired hanging height by feeding it through the ceiling canopy. Secure the cable at the desired length using the provided strain relief mechanism within the canopy.
5. Žične veze: Connect the electrical wires from the lamp to the corresponding wires from the ceiling. Typically, connect live (brown/black) to live, neutral (blue) to neutral, and ground (green/yellow) to ground. Use appropriate wire connectors. Ensure all connections are secure.
6. Attach Ceiling Canopy: Carefully push the ceiling canopy up against the ceiling, covering the wiring. Secure it to the mounting bracket using the screws provided.
7. Ugradnja sijalice: Screw an E27 base light bulb (max 40W, not included) into the lamp držač. Nemojte previše zategnuti.
8. Vrati snagu: Ponovo uključite napajanje na glavnom prekidaču.
9. Test Lamp: Turn on the light switch to ensure the lamp ispravno funkcionira.

Image: Detail of the ceiling canopy, showing the connection point to the ceiling.

Image: The Jily pendant lamp, showcasing its full design and illuminated bulb.

4. Uputstvo za upotrebu

The Atmosphera Jily Pendant Lamp dizajniran je za jednostavno rukovanje.

• Uključivanje/isključivanje: Kontrolišite lamp using a standard wall light switch connected to the circuit.
• Sijalica: This fixture uses one E27 base light bulb. For optimal performance and light quality, choose a bulb that suits your preference (e.g., LED, incandescent, warm white).

Image: The Jily pendant lamp installed in a living space, demonstrating its aesthetic and light output.

5. Održavanje

Redovno održavanje će pomoći u očuvanju izgleda i funkcionalnosti vašeg privjeska.amp.

čišćenje:

• Otprašivanje: Regularly use a soft, dry duster or a microfiber cloth to gently remove dust from the lampshade and other surfaces.
• Čišćenje na licu mjesta: Za tvrdokorne mrlje, lagano dampen a cloth with water (do not use harsh chemicals or abrasive cleaners) and gently wipe the affected area. Avoid excessive moisture, especially on the paper shade.

Zamjena sijalice:

1. Isključite napajanje: Always turn off the power to the lamp at the main circuit breaker and the wall switch before replacing the bulb.
2. Ostavite da se ohladi: Ensure the old bulb has completely cooled down before touching it.
3. Uklonite staru sijalicu: Carefully unscrew the old E27 bulb counter-clockwise.
4. Instalirajte novu žarulju: Screw in a new E27 bulb (max 40W) clockwise until snug. Do not overtighten.
5. Vrati snagu: Turn the power back on and test the new bulb.

Slika: Detaljna view of the paper and iron lampmaterijal za sjenu.

6. Otkrivanje problema

If you encounter issues with your pendant lamp, pogledajte sljedeće uobičajene probleme i rješenja:

If the problem persists after attempting these solutions, please contact a qualified electrician or customer support.

7. Specifikacije

8. Garancija i podrška

Specific warranty information for the Atmosphera Jily Pendant Lamp may vary by region and retailer. Please refer to your purchase documentation or contact the retailer where you purchased the product for details regarding warranty coverage.

For technical support, missing parts, or further assistance, please contact the customer service department of ATMOSPHERA CREATEUR D'INTERIEUR or your retailer.

When contacting support, please have your model name (Jily) and model number (3560232579516) available.