Intex 28464EX

Intex PureSpa Calacatta Square Hot Tub User Manual

Model: 28464EX | Brand: Intex

1. Uvod

This manual provides essential information for the safe and efficient use of your Intex PureSpa Calacatta Square Hot Tub, Model 28464EX. Please read all instructions carefully before installation and operation. This 4-person inflatable spa features 140 powerful air bubble jets and 4 hydro jets, an integrated heating system, and a stylish Calacatta marble-inspired design.

Intex PureSpa Calacatta Square Hot Tub set up outdoors next to a swimming pool.

Image 1.1: The Intex PureSpa Calacatta Square Hot Tub, Model 28464EX, shown in an outdoor setting.

2. Važne informacije o sigurnosti

Always follow basic safety precautions when installing and using this electrical product. Failure to follow these instructions can result in injury or death.

  • Ne dozvolite djeci da koriste ovaj proizvod osim ako nisu pod stalnim nadzorom.
  • Do not use the spa if the temperature is below 4°C (40°F).
  • The spa should be placed on a flat, level surface capable of supporting the weight of the filled spa and occupants.
  • Always disconnect the power plug from the electrical outlet before removing, cleaning, servicing, or making any adjustment to the product.
  • Do not operate the spa if the cover is not properly secured.
  • Prije upotrebe, konsultujte se s ljekarom ako ste trudni, imate srčane bolesti, visok krvni pritisak, dijabetes ili bilo koje drugo zdravstveno stanje.

3. Sadržaj paketa

Provjerite da li su sve komponente prisutne i u dobrom stanju:

  • Spa kada na naduvavanje
  • Spa Control Unit (with integrated inflation system)
  • Insulated Cover
  • Ground Cloth
  • Storage and Transport Bag
  • Filter ulošci (2)
  • Raspršivač hemijskih proizvoda
  • Komplet za popravku

4. Upute za postavljanje

4.1 Priprema lokacije

Choose a flat, level, and stable surface for your spa. Ensure the area is free from sharp objects and debris. The surface must be able to support the weight of the filled spa (approximately 795 liters of water plus occupants).

4.2 Laying the Ground Cloth

Unfold the ground cloth and place it on your chosen site. This provides an additional layer of protection for the spa's base.

Ground cloth for the Intex PureSpa laid out on grass.

Image 4.1: The protective ground cloth should be placed on a level surface before setting up the spa.

4.3 Inflacija

  1. Unpack the spa tub and place it on the ground cloth.
  2. Connect the inflation hose from the control unit to the spa's inflation valve.
  3. Plug the control unit into a grounded electrical outlet.
  4. Press the inflation button on the control panel to begin inflating the spa. Inflate until the spa walls are firm to the touch, but not over-inflated.
  5. Once inflated, disconnect the hose and securely close the inflation valve.

4.4 Punjenje spa kade

Fill the spa with fresh tap water to the indicated maximum fill line. Do not overfill.

5. Uputstvo za upotrebu

5.1 Kontrolna tabla prekoview

The PureSpa features a wireless, rechargeable control panel for easy operation. Familiarize yourself with the buttons and display.

Close-up of the Intex PureSpa control panel showing temperature display and various function buttons.

Image 5.1: The wireless control panel allows for easy adjustment of spa functions.

5.2 Zagrijavanje vode

Press the heater button on the control panel. Use the temperature adjustment buttons to set your desired water temperature (range: 10°C to 40°C / 50°F to 104°F). The heating indicator light will illuminate. The heating system will automatically turn off once the set temperature is reached.

5.3 Activating Jets

Press the bubble jet button to activate the 140 air bubble jets for a relaxing massage. Press the hydro jet button to activate the 4 directional hydro jets for a more targeted massage. You can use both types of jets simultaneously.

Close-up of the Intex PureSpa jets, showing both air bubbles and hydro jets in action.

Image 5.2: The spa features both invigorating air bubble jets and powerful hydro jets.

5.4 Sistem filtracije

The filtration system operates automatically to keep the water clean. Ensure filter cartridges are installed correctly and cleaned regularly.

6. Održavanje

6.1 Hemija vode

Maintain proper water chemistry using appropriate spa chemicals. Test the water regularly and adjust pH, alkalinity, and sanitizer levels as needed. Refer to your chemical manufacturer's instructions.

6.2 Čišćenje i zamjena filter uloška

The filter cartridges should be cleaned frequently, ideally after each use or every few days, depending on usage. Rinse them with a garden hose. Replace cartridges every 2-4 weeks, or when they remain dirty after cleaning.

6.3 Spa Cleaning

Periodically drain and clean the spa tub. Use a soft brush and mild cleaning solution. Rinse thoroughly before refilling.

6.4 Spa Cover

Always use the insulated cover when the spa is not in use to retain heat and keep debris out. Secure the cover straps to prevent accidental removal.

Intex PureSpa Calacatta Square Hot Tub with its insulated cover securely fastened.

Image 6.1: The insulated cover helps maintain water temperature and keeps the spa clean.

7. Otkrivanje problema

ProblemMogući uzrokRješenje
Spa se ne zagrijavaHeater button not activated; filter clogged; water level too low; ambient temperature too cold.Ensure heater is on; clean/replace filter; add water to fill line; ensure ambient temperature is suitable.
Mlaznice ne radeJet button not activated; air blower/pump issue; power supply problem.Activate jet function; check power connection; consult support if issue persists.
Voda je mutnaDirty filter cartridge; improper water chemistry; heavy usage.Clean/replace filter; test and adjust water chemistry (sanitizer, pH); shock treat the water.
Spa centar gubi zrakLabav čep ventila za naduvavanje; mala rupica.Tighten valve cap; locate and repair puncture using the provided repair kit.

8. Specifikacije

FeatureDetalj
Broj modela28464EX
BrandIntex
OblikSquare
Kapacitet sjedenja4 ljudi
Kapacitet vode795 litara
Outer Dimensions (L x W x H)211 x 211 x 71 cm (83 x 83 x 28 inča)
Unutrašnje dimenzije (D x Š)160 x 160 cm (63 x 63 inča)
MaterijalPolychlorure de vinyle (PVC), Vinyl
Number of Air Jets140
Number of Hydro Jets4
Heating Range10°C - 40°C (50°F - 104°F)
Voltage220 Volts
Težina artikla (prazno)53.7 kilograma (118.4 lbs)
Obavezna montažaDa
Diagram showing the multi-layered construction of the Intex PureSpa material.

Image 8.1: The durable multi-layered PVC and Vinyl construction ensures product longevity.

9. Garancija i podrška

Za informacije o garanciji i korisničku podršku, molimo pogledajte garantni list koji dolazi uz vaš proizvod ili posjetite službenu Intex stranicu. webSačuvajte dokaz o kupovini za slučaj reklamacije.

If you encounter issues not covered in the troubleshooting section, contact Intex customer service for assistance. Contact details can typically be found on the Intex webweb-mjestu ili u ambalaži vašeg proizvoda.

© 2024 Intex. Sva prava pridržana. Ovaj priručnik je samo u informativne svrhe.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.