simplehuman ST1077

Simplehuman ST1077 Rechargeable Sensor Soap Dispenser with Caddy User Manual

Model: ST1077

Uvod

Thank you for choosing the Simplehuman ST1077 Rechargeable Sensor Soap Dispenser with Caddy. This innovative dispenser provides a non-contact method for dispensing liquid soap, promoting hygiene and efficiency in your kitchen or bathroom. Its integrated caddy offers a convenient space for a sponge, optimizing your dishwashing experience. This manual provides essential information for the proper setup, operation, and maintenance of your new device.

Simplehuman ST1077 sensor soap dispenser with a sponge in its caddy, front view.

Image: The Simplehuman ST1077 sensor soap dispenser shown with a sponge placed in its accompanying caddy, providing a clear view o dizajnu i funkcionalnosti proizvoda.

Sigurnosne informacije

  • Do not immerse the dispenser in water. The unit is waterproof for cleaning, but not designed for submersion.
  • Use only liquid soap with appropriate consistency. Thick or foaming soaps may clog the pump.
  • Čuvati van domašaja djece.
  • Use only the provided wireless charger for recharging.
  • Avoid placing the dispenser in direct sunlight or near heat sources.
  • Ne pokušavajte sami rastavljati ili popravljati uređaj. Za pomoć se obratite korisničkoj podršci.

Setup

1. Raspakivanje

Carefully remove all components from the packaging. Verify that all parts are present: the sensor soap dispenser, the stainless steel caddy, and the wireless charging pad.

2. Početno punjenje

Before first use, fully charge the dispenser. Place the dispenser onto the wireless charging pad. The indicator light on the dispenser will illuminate to show it is charging. A full charge can last up to 8 months. Ensure the charging pad is connected to a power source.

3. Filling with Soap

  1. Remove the top lid of the dispenser.
  2. Pour liquid soap into the reservoir. Do not overfill. The capacity is 414ml.
  3. Vratite poklopac sigurno.
Hand pouring liquid soap from a refill pouch into the Simplehuman ST1077 dispenser.

Image: A hand is shown refilling the Simplehuman ST1077 dispenser with liquid soap from a pouch, illustrating the easy refill process.

4. Plasman

Place the dispenser and caddy unit on a flat, stable surface near your sink. Ensure there is enough clearance above the sensor for proper operation and easy access for refilling. The caddy is designed to hold a standard kitchen sponge.

Simplehuman ST1077 dispenser and caddy placed on a kitchen counter next to a sink.

Image: The Simplehuman ST1077 dispenser and caddy are positioned on a kitchen countertop beside a modern sink, demonstrating typical placement.

Uputstvo za upotrebu

1. Dispensing Soap

To dispense soap, simply place your hand or a sponge under the sensor nozzle. The sensor will detect your presence and automatically dispense a measured amount of soap. The clog-proof pump ensures a precise and consistent flow, while the silicone valve prevents messy drips.

A hand holding a sponge under the Simplehuman ST1077 dispenser, with soap being dispensed onto the sponge.

Image: Soap is being dispensed from the Simplehuman ST1077 onto a sponge held beneath the sensor, illustrating the hands-free operation.

2. Adjusting Soap Volume

The dispenser allows you to regulate the desired amount of soap. For a smaller amount, keep your hand or sponge closer to the sensor. For a larger amount, position your hand or sponge further away from the sensor.

Održavanje

1. Čišćenje

The dispenser is waterproof for easy cleaning. Wipe the exterior with a damp cloth. Do not use abrasive cleaners or scrubbers. For the caddy, it can be removed from the base for thorough cleaning. Rinse it with water and mild soap, then dry completely.

Odozgo view of the empty Simplehuman ST1077 caddy, showing its interior design.

Slika: Pogled odozgo prema dolje view of the empty caddy component of the Simplehuman ST1077, highlighting its design for holding a sponge.

2. Refilling Soap

When the soap level is low, refill the dispenser following the instructions in the 'Filling with Soap' section under Setup.

3. Punjenje

When the battery is low, the indicator light may flash. Place the dispenser on its wireless charging pad to recharge. A full charge typically lasts up to 8 months, depending on usage.

Rješavanje problema

  • Dispenser not working: Ensure the unit is charged. Check if the sensor is clean and unobstructed.
  • No soap dispensed: Verify that the dispenser is filled with liquid soap. Check for clogs in the nozzle; if clogged, try cleaning the nozzle with warm water.
  • Soap dispensing too much/too little: Adjust hand proximity to the sensor as described in the 'Adjusting Soap Volume' section.
  • Problemi s punjenjem: Ensure the wireless charging pad is properly connected to a power source and the dispenser is correctly placed on the pad.
  • curenje: Ensure the top lid is securely closed and the soap used is not too thin.

Specifikacije

FeatureDetalj
Broj modelaST1077
BojaSrebro
Materijalnerđajući čelik
Dimenzije proizvoda (D x Š x V)11.2D x 7W x 17.2H centimetara
Kapacitet tečnosti414 mililitara
Vrsta materijala BesplatnoPVC-free, Phthalate-free
PunjivaYes, with wireless charger
Trajanje baterijeDo 8 mjeseca sa jednim punjenjem
Simplehuman ST1077 dispenser with caddy, showing its length, width, and height dimensions.

Image: The Simplehuman ST1077 dispenser and caddy are displayed with clear labels indicating its dimensions: 11.2cm length, 7cm width, and 17.2cm height.

Informacije o garanciji

Simplehuman products are designed for durability and are backed by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Simplehuman webweb stranicu za detaljne uslove garancije specifične za vašu regiju.

Korisnička podrška

For further assistance, troubleshooting not covered in this manual, or to inquire about replacement parts, please contact Simplehuman customer support. You can find contact information on the Simplehuman official webweb-mjestu ili putem ambalaže vašeg proizvoda.

© 2026 Simplehuman. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.