JEYI I9-Seal

JEYI I9-Seal M.2 NVMe SSD kućište - uputstvo za upotrebu

Model: I9-Seal

Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

Sadržaj paketa

Molimo Vas da provjerite da li se u Vašem paketu nalaze sve dolje navedene stavke:

JEYI M.2 NVMe SSD Enclosure
Termalni jastučići
Odvijač
USB-A to USB-C Cable (10Gbps)
USB-C to USB-C Cable (10Gbps)
Lanyard

JEYI I9-Seal M.2 NVMe SSD Enclosure package contents — Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

Uputstva za postavljanje

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

Pripremite ogradni prostor: Gently slide open the enclosure to reveal the internal PCB.
Nanesite termalnu podlogu: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
Insert NVMe SSD: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
Osigurajte SSD: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
Zatvorite priloženi materijal: Carefully slide the enclosure cover back into place until it clicks securely.

Eksplodirao view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement — Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.

Diagram showing compatibility with M.2 2280 NVMe SSDs only — Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

Uputstvo za upotrebu

Once your NVMe SSD is securely installed, connect the enclosure to your device:

Povežite se na uređaj: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
Indikator napajanja: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
Prijenos podataka: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.

JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet — Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.

Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2 — Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

Održavanje

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

Upravljanje toplinom: Aluminij casing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
čišćenje: Za čišćenje vanjske strane kućišta koristite meku, suhu krpu. Izbjegavajte upotrebu tekućih sredstava za čišćenje ili rastvarača.
Skladištenje: Kada se ne koristi, kućište čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
Održavanje kablova: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

Rješavanje problema

Problem	Mogući uzrok	Rješenje
Računar nije detektovao kućište.	Labava kablovska veza. SSD nije pravilno instaliran. SSD not initialized/formatted. Neispravan USB port ili kabl.	Uverite se da su kablovi dobro povezani. Re-open enclosure and verify SSD is seated correctly and screwed in. Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD. Pokušajte s drugim USB portom ili kablom.
Male brzine prijenosa podataka.	Povezano na sporiji USB port (npr. USB 2.0). Thermal throttling due to high temperature. Ograničenja performansi SSD-a.	Connect to a USB 3.2 Gen 2 (10Gbps) compatible port. Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot. Verify your NVMe SSD's rated speed.
Enclosure gets very hot.	Normal operation during heavy data transfer. Ineffective thermal pad contact.	This is expected as the aluminum casing dissipates heat. Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

Specifikacije

Feature	Detalj
Model	I9-Seal
Brand	JEYI
Hardversko sučelje	USB 3.2 Gen 2 (USB-C)
Brzina prijenosa podataka	Do 10 Gbps
Kompatibilni tip SSD-a	NVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor	2280 (80mm) only
Max Storage Capacity	4 TB
Čipset	JMS583 A3
Karakteristike	UASP Support, TRIM Support, Win to Go (WTG) Support
Materijal	Aluminijumska legura
Boja	Srebro
Dimenzije proizvoda	4.06 x 1.02 x 0.39 inča (103 x 26 x 10 mm)
Težina artikla	0.317 unce (9 grama)
Kompatibilni operativni sistemi	Windows, macOS, Linux, iOS, Android

Diagram of the JMS583 A3 master chip — Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

Garancija i podrška

For warranty information or technical support, please refer to the official JEYI website or contact their customer service directly. Details regarding specific warranty periods and support channels are typically provided with your purchase documentation or on the manufacturer's website.

Proizvođač: JEYI

Webstranica: Visit the JEYI Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.