BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Uvod

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Karakteristike proizvoda

• Integrisani senzor pokreta: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Adjustable Hold Time: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Tri načina rada:
  • AUTO način rada: Light activates when motion is detected in dark conditions.
  • ON način rada: Light remains constantly on.
  • G način rada: Light activates when motion is detected in both daytime and nighttime conditions.
• Tri temperature boje: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Ultra tanak dizajn: Low-profile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Višenamjenska instalacija: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x Uputstvo za upotrebu (ovaj dokument)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Sigurnosne informacije

UPOZORENJE: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Ensure the power supply is OFF before handling any wiring.
• This fixture is designed for 120V AC power supply.
• Ne pokušavajte modificirati učvršćenje.
• Držite djecu podalje od područja instalacije.

Podešavanje i instalacija

Slijedite ove korake za pravilnu instalaciju:

1. Pripremite se za instalaciju:
   • Isključite napajanje na prekidaču prije pokretanja.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Instalirajte nosač za montažu:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Žične veze:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Montirajte rasvjetno tijelo:
   • Pažljivo ugurajte sve žice u razvodnu kutiju.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Vrati snagu: Ponovo uključite struju na prekidaču.

Slika 4: Vizualni vodič za proces instalacije.

Uputstvo za upotrebu

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Odabir načina rada:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • AUTOMATSKI: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • ON: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 sekundi
   • 120S: 120 sekundi (2 minute)
   • 180S: 180 sekundi (3 minute)

Figure 5: Switches for adjusting hold time and operating modes.

Održavanje

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• čišćenje: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Životni vijek LED-a: The integrated LED light source has an average lifespan of 30,000 hours and is not user-replaceable.
• inspekcija: Povremeno provjeravajte uređaj da li ima znakova oštećenja ili labavih spojeva. Ako pronađete bilo kakve probleme, isključite napajanje i konsultujte se sa kvalifikovanim električarem.

Rješavanje problema

Ako naiđete na probleme sa svojom rasvjetnom tijelom, pogledajte sljedeće uobičajene probleme i rješenja:

Specifikacije

Garancija i podrška

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN webSačuvajte račun kao dokaz o kupovini.