Jambo KL-217

Jambo 16-inch Liquid Motion Lamp (Model KL-217) User Manual

Model: KL-217

Uvod

Thank you for choosing the Jambo 16-inch Liquid Motion Lamp. This manual provides essential information for the safe and proper use, setup, operation, and maintenance of your lampMolimo vas da ga pažljivo pročitate prije upotrebe i sačuvate za buduću upotrebu.

Jambo 16-inch Liquid Motion Lamp with blue base and cap, purple liquid, and orange wax.
Jambo 16-inch Liquid Motion Lamp with blue base and cap, purple liquid, and orange wax.

The Jambo Liquid Motion Lamp creates a mesmerizing visual display as heated wax slowly rises and falls within a liquid-filled glass vessel. This dynamic effect provides a calming and decorative ambiance for any indoor space.

Sigurnosne informacije

Da biste osigurali siguran rad i spriječili oštećenja, molimo vas da se pridržavate sljedećih sigurnosnih mjera opreza:

  • Samo za unutrašnju upotrebu: Ovo lamp is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
  • električna sigurnost: Osigurajte lamp is connected to a 120-volt power outlet. Do not overload electrical outlets.
  • Upozorenje o vrućini: Lamp and its contents become hot during operation. Do not touch the glass or base while the lamp je uključen ili odmah nakon isključivanja. Ostavite dovoljno vremena da se ohladi.
  • Stabilan plasman: Stavite lamp on a flat, stable, and heat-resistant surface away from edges where it could be easily knocked over.
  • Avoid Shaking: Do not shake, drop, or move the lamp while it is operating or hot, as this can damage the internal components and cause the liquid to become cloudy.
  • Držite dalje od djece i kućnih ljubimaca: Due to the heat generated, keep the lamp van domašaja dece i kućnih ljubimaca.
  • ventilacija: Ensure adequate air circulation around the lamp to prevent overheating. Do not cover the lamp.
  • Oštećeni kabel: Ako je kabel za napajanje oštećen, mora ga zamijeniti proizvođač ili kvalificirani serviser kako bi se izbjegle opasnosti.

Sadržaj paketa

Prilikom raspakivanja provjerite da li su sve komponente prisutne:

  • 1 x Jambo Liquid Motion Lamp Unit (Base, Glass Vessel, Cap)
  • 1 x 30-Watt Incandescent Bulb (E17 base)
Diagram showing the components of the Jambo Liquid Motion Lamp: liquid lamp, 30-watt bulb, standard plug, high-quality durable glass, and sleek blue base and cap.
Components of the Jambo Liquid Motion Lamp, including the glass vessel, base, cap, and bulb.

Setup

Follow these steps to set up your Jambo Liquid Motion Lamp:

  1. Raspakirajte: Pažljivo izvadite sve komponente iz pakovanja.
  2. Ugradnja žarulje: If the bulb is not pre-installed, gently screw the included 30-watt E17 incandescent bulb into the socket located in the lamp base. Do not overtighten.
  3. Place Glass Vessel: Carefully place the glass vessel onto the lamp base, ensuring it sits securely.
  4. Attach Cap: Place the decorative cap onto the top of the glass vessel.
  5. Položaj Lamp: Stavite sklopljeni lamp on a flat, stable, and heat-resistant surface, away from direct sunlight, extreme temperatures, or drafts.
  6. Priključite napajanje: Uključite kabel za napajanje u standardnu ​​električnu utičnicu od 120 volti.
Image illustrating the simplicity of setting up the Jambo Liquid Motion Lamp, emphasizing 'Ready to Use' by just plugging it in.
The Jambo Liquid Motion Lamp is ready for use after simple assembly and plugging into a power source.

Uputstvo za upotrebu

Operating your Jambo Liquid Motion Lamp je jednostavno:

  1. Uključi: Locate the rotary switch on the power cord or base (depending on model) and turn it to the 'ON' position. The bulb will illuminate.
  2. Vrijeme zagrijavanja: For the first use, or after extended periods of inactivity, the lamp may take 2-4 hours to fully warm up and for the wax to begin flowing smoothly. This is normal.
  3. Wax Movement: Once warmed, the wax will begin to soften, rise, and fall in captivating patterns. The lamp operates best at room temperature (20-25°C / 68-77°F).
  4. Trajanje rada: For optimal performance and longevity, it is recommended to operate the lamp for no more than 8-10 hours at a time. Allow it to cool down completely before restarting.
  5. Isključi: Da biste isključili lamp, rotate the switch to the 'OFF' position and unplug it from the power outlet when not in use for extended periods.
The Jambo Liquid Motion Lamp illuminated in a bedroom setting, casting a soft glow.
The Jambo Liquid Motion Lamp creating a calming ambiance in a room.
The Jambo Liquid Motion Lamp displayed on a side table in a modern living room, adding a decorative accent.
The Jambo Liquid Motion Lamp as a decorative accent in a modern living space.

Održavanje

Proper care will ensure the longevity and performance of your lamp:

  • čišćenje: Osigurajte lamp is unplugged and completely cool before cleaning. Wipe the exterior of the glass and base with a soft, damp cloth. Do not use abrasive cleaners or immerse any part of the lamp u vodi.
  • Zamjena žarulje: If the bulb burns out, unplug the lamp and allow it to cool. Carefully remove the old bulb and replace it with a new 30-watt, E17 base incandescent bulb. Ensure the replacement bulb matches the original specifications.
  • Skladištenje: Ako pohranjujete lamp for an extended period, ensure it is clean, dry, and stored upright in a cool, dark place.
  • Ne otvaraj: Never attempt to open the sealed glass vessel or tamper with its contents. This will void any warranty and can be dangerous.

Rješavanje problema

If you encounter issues with your Jambo Liquid Motion Lamp, pogledajte sljedeće uobičajene probleme i rješenja:

ProblemMogući uzrokRješenje
Lamp se ne uključuje.No power, faulty bulb, or loose connection.Provjerite da li je lamp is properly plugged in. Ensure the power outlet is functional. Verify the rotary switch is in the 'ON' position. Replace the bulb if it is burnt out.
Wax is not moving or moving slowly.Insufficient warm-up time, cold room temperature, or incorrect bulb wattage.Ostavite 2-4 sata za lamp to fully warm up. Ensure the room temperature is between 20-25°C (68-77°F). Confirm the bulb is a 30-watt E17 incandescent type.
Liquid is cloudy.Initial cloudiness, lamp shaken, or improper storage.Initial cloudiness often clears after several hours of continuous operation. Avoid shaking or dropping the lamp. If cloudiness persists after multiple uses, contact customer support.
Wax is stuck at the top or bottom.Not fully warmed up, lamp tilted, or excessive heat/cold.Osigurajte lamp has had sufficient warm-up time. Verify the lamp is placed on a level surface. Avoid placing the lamp near heat sources or in very cold areas.

Specifikacije

Key technical specifications for the Jambo 16-inch Liquid Motion Lamp (Model KL-217):

FeatureDetalj
Broj modelaU 217 SATA
Dimenzije (D x Š x V)11.4 cm x 11.4 cm x 39.4 cm (približno 4.5 x 4.5 x 15.5 inča)
Shade Height16 inča
Izvor napajanjaCorded Electric
Voltage120 Volts
Wattage30 Watts
Bulb TypeIncandescent
Bulb BaseE17
Tip prekidačaRotary
Osnovni materijalAluminijum
Shade MaterialStaklo
Tip završetkaMetalik
Unutarnja/vanjska upotrebaIndoor
Nivo vodootpornostiNije vodootporan
UPC850019692297

Garancija i podrška

Jambo is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For technical support, troubleshooting assistance beyond what is covered in this manual, or inquiries regarding parts and service, please contact Jambo customer support through the retailer where you purchased the product or visit the official Jambo webstranica za kontakt informacije.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.