OWON SDS1102 Digital Oscilloscope User Manual

1. Uvod

The OWON SDS1102 is a 2-channel digital storage oscilloscope designed for a wide range of electronic measurement and analysis tasks. It features a 100 MHz bandwidth, a 1 GSa/s real-time sampling rate, and a clear 7-inch TFT-LCD display. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device, ensuring optimal performance and longevity.

Figure 1: OWON SDS1102 Digital Oscilloscope

2. Sigurnosne informacije

Please read and understand all safety instructions before operating the device. Failure to comply with these instructions may result in electric shock, fire, or damage to the product.

• Use only the power cord supplied with the device.
• Ensure the device is properly grounded to prevent electric shock.
• Nemojte koristiti uređaj na mokrom ili damp uslovima.
• Izbjegavajte izlaganje uređaja direktnoj sunčevoj svjetlosti ili visokim temperaturama.
• Ne otvarajte uređaj casing; sve servisne radove prepustite kvalifikovanom osoblju.
• Verify probe attenuation settings match the oscilloscope's input settings.

3. Sadržaj paketa

Provjerite da li se u vašem paketu nalaze sve dolje navedene stavke:

• OWON SDS1102 Digital Oscilloscope
• Kabl za napajanje
• CD-ROM (containing software and documentation)
• USB kabel
• Oscilloscope Probes (2 units)
• Alat za podešavanje sonde (odvijač)
• Korisnički priručnik (ovaj dokument)

4. Proizvod je gotovview

The SDS1102 is designed for efficiency and accuracy in various applications, from electronic circuit debugging to automotive maintenance.

Ključne karakteristike:

• HD LCD ekran: A 7-inch color TFT-LCD with 65535 colors and 800 x 480 pixel resolution provides clear and concise waveform readings. It supports four automatic cursor modes for precise voltage and time difference measurements.
• Visoka Sampling stopa: Equipped with a 1 GSa/s sampling rate, the device allows for detailed waveform capture and analysis. It includes single waveform recording and playback, and supports plug-and-play USB storage devices.
• Powerful System: Features an auto-range function and supports horizontal, vertical, single/multi-waveform tracking. Probe attenuation settings include 1x, 10x, 100x, and 1000x. It offers 30 types of automatic measurement functions and supports LABVIEW communication for secondary development.
• prenosivost: With ultra-thin body design (301 x 152 x 70 mm) and a weight of 1.1 kg, the oscilloscope is highly portable, saving desktop space and operating quietly.

Figure 2: Key features of the SDS1102 Oscilloscope

Figure 3: Compact design and dimensions for portability

Figure 4: Diverse applications of the SDS1102 Oscilloscope

5. Podešavanje

5.1 Početno napajanje

1. Connect the power cord to the oscilloscope and a suitable power outlet.
2. Pritisnite dugme za napajanje da uključite uređaj.
3. The 7-inch TFT-LCD display will illuminate, showing the OWON logo and then the main waveform interface.

5.2 Kalibracija sonde

Before taking measurements, it is crucial to calibrate the oscilloscope probes for accurate readings. This process compensates for any slight variations in the probes as supplied.

1. Connect a probe to one of the BNC input connectors (e.g., CH1).
2. Ensure the probe's attenuation switch (usually on the probe body) is set to 10x.
3. Connect the probe tip to the test point, which is a small metal loop located on the bottom right of the oscilloscope's front panel.
4. Attach the black grounding alligator clip of the probe to the lower metal loop, which serves as the ground test point.
5. Pritisnite Autoset button on the oscilloscope. The device will automatically adjust settings to display the test signal. The test point outputs a 1 kHz, 5V square wave.
6. Observe the waveform on the screen. If it does not appear as a perfect square wave (e.g., rounded corners or overshoot), use the supplied probe adjustment tool (small screwdriver).
7. Carefully insert the screwdriver into the compensation screw on the BNC connector of the probe and adjust it until the displayed square wave is clean and flat on top and bottom, with sharp corners. A slight turn (approximately 1/8th) may be sufficient.
8. Repeat this process for all probes you intend to use.

Figure 5: Oscilloscope probe connected to a circuit for testing

6. Uputstvo za upotrebu

6.1 Osnovni prikaz talasnog oblika

• Spojite sondu na strujno kolo koje se testira.
• Podesite Vertical Scale (VOLTS/DIV) i Horizontal Scale (SEC/DIV) knobs to get a stable and viewable waveform on the screen.
• Koristite Pozicija dugmad za pomicanje valnog oblika vertikalno ili horizontalno.
• Pritisnite Autoset button for automatic waveform optimization.

Figure 6: Auto-range function in action

6.2 Cursor Measurements

The SDS1102 supports four automatic cursor modes for precise measurements.

1. Pritisnite Kursor dugme.
2. Select the desired cursor type (e.g., Voltage, Time) using the menu options.
3. Adjust the cursor positions using the multipurpose knob to measure specific points on the waveform.
4. The measured values (e.g., ◊V, ◊T) will be displayed on the screen.

Figure 7: Performing cursor measurements

6.3 Automatska mjerenja

The oscilloscope offers 30 types of automatic measurements for quick analysis.

1. Pritisnite Mjera dugme.
2. Navigate through the menu to select the desired automatic measurements (e.g., Frequency, Peak-to-Peak Voltage, RMS).
3. The selected measurements will be displayed on the screen, updating in real-time.

Figure 8: Automatic measurement display

6.4 Waveform Recording and Playback

The device allows for recording and replaying single waveforms.

1. Pritisnite Sačuvaj/Opozovi button (or similar function).
2. Select the option to record a waveform.
3. To replay, select the playback option and choose the desired stored waveform.

Figure 9: Waveform save and recall menu

6.5 USB Connectivity and PC Control

The SDS1102 supports plug-and-play USB storage devices for saving data and configurations. It also allows for remote communication and control via a computer using the USB interface, with support for LABVIEW and SCPI commands.

Figure 10: USB connection for PC communication and data transfer

7. Održavanje

The OWON SDS1102 is designed for continuous, maintenance-free use under normal operating conditions. However, proper care ensures its longevity and performance.

• čišćenje: Za čišćenje vanjskog dijela osciloskopa koristite meku, suhu krpu. Za tvrdokornu prljavštinu, laganoamp Može se koristiti krpa s blagim deterdžentom, pazeći da tekućina ne uđe u uređaj. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
• Skladištenje: When not in use, store the oscilloscope in a clean, dry environment, away from extreme temperatures and humidity.
• Njega sonde: Handle probes carefully. Avoid bending or stressing the cables. Keep probe tips clean.
• Unutrašnje održavanje: The device does not require user-performed internal maintenance. Do not attempt to open the casing, jer to može poništiti garanciju i izložiti vas opasnostima od električnog udara.

8. Otkrivanje problema

If you encounter issues with your OWON SDS1102, refer to the following common troubleshooting steps:

For issues not covered here, please refer to the full manual on the provided CD-ROM or contact OWON customer support.

9. Specifikacije

Figure 11: Summary of key technical specifications

10. Garancija i podrška

OWON products are designed for reliability and performance. For warranty information, please refer to the documentation included on the CD-ROM or visit the official OWON website. Information regarding the availability of spare parts is currently unavailable.

For technical support, product inquiries, or service requests, please contact OWON customer service through their official channels. Keep your purchase receipt and product model number (OWON-SDS1102) handy when contacting support.