DSC HS2LCD N PowerSeries NEO Full Message LCD Hardwired Keypad User Manual

Uvod

This manual provides essential information for the installation, operation, and maintenance of the DSC HS2LCD N PowerSeries NEO Full Message LCD Hardwired Keypad. This keypad is designed to work seamlessly with DSC PowerSeries NEO control panels, including models HS2016, HS2032, HS2064, and HS2128.

The image displays the DSC HS2LCD N keypad, a white, rectangular device with a prominent blue LCD screen. The screen shows the text 'System is Ready to Arm'. The DSC logo is visible on the lower left of the keypad.

Instalacija i podešavanje

The DSC HS2LCD N keypad is a hardwired device requiring professional installation.

Kontrolna lista prije instalacije

• Ensure the control panel is powered off before connecting the keypad.
• Verify compatibility with your PowerSeries NEO control panel (HS2016, HS2032, HS2064, HS2128).
• Have necessary tools: screwdriver, wire strippers, mounting hardware.

Upute za ožičenje

Connect the keypad to the control panel's Keybus terminals (Red, Black, Yellow, Green) following the wiring diagram provided with your control panel. Ensure correct polarity.

Montaža

Mount the keypad securely on a flat surface using the provided mounting screws. Ensure it is placed in a location easily accessible for daily use.

Uputstvo za upotrebu

The HS2LCD N keypad provides a full message LCD display for clear system status and intuitive operation.

Naoružavanje sistema

• Ostanite naoružani: Pritisnite i držite Ostani button or enter your user code followed by *9.
• Away Arming: Enter your user code. The system will arm after the exit delay.
• Naoružavanje bez ulaska: Pritisnite i držite No-Entry button or enter your user code followed by *1.

Deaktiviranje sistema

Enter your user code when the system is armed or in alarm.

Viewing System Status

The LCD will display messages such as "System is Ready to Arm", "System Armed", or "Alarm". Use the arrow keys (< >) to scroll through event buffers or system messages.

Pristup funkcijama

Refer to your main control panel manual for specific function codes and programming options accessible via the keypad. Common functions include:

• Bypass Zones: *1 followed by zone number(s).
• Prikaz problema: *2.
• Memory of Alarms: *3.
• Podešavanje vremena i datuma: *6 followed by master code.

Održavanje i njega

• Čišćenje: Wipe the keypad surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Redovno testiranje: Periodically test your alarm system, including the keypad, in conjunction with your alarm monitoring company.
• Napajanje: Ensure a stable power supply to the control panel to prevent keypad malfunctions.

Rješavanje problema

This section addresses common issues you might encounter with your DSC HS2LCD N keypad.

Tastatura ne reaguje

• Provjerite napajanje: Ensure the control panel has power.
• Ožičenje: Verify all Keybus connections are secure and correctly wired (Red, Black, Yellow, Green).
• Control Panel Status: Check the main control panel for error indicators.

"Trouble" Light On

• Pritisnite *2 on the keypad to view the specific trouble condition (e.g., AC failure, battery trouble, zone fault).
• Consult your control panel manual for detailed explanations of trouble codes.

Incorrect Time/Date Display

• Koristite *6 master code command to set the correct time and date.

Keypad Beeping

• A continuous beep usually indicates a trouble condition. Press *2 to identify the issue.
• A short beep confirms key presses.

Tehničke specifikacije

Garancija i korisnička podrška

Ovaj proizvod dolazi sa 12-mjesečnom garancijom od datuma kupovine.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your authorized DSC dealer or the product manufacturer.

For more information, visit the official DSC website or consult your installer.