ESKY Scale 300 V2 Flybarless RTF RC Electric Helicopter

Uvod

The ESKY Scale 300 V2 Flybarless RTF (Ready To Fly) RC Electric Helicopter is designed for remote control enthusiasts of all skill levels. This model features a robust and sleek design, incorporating advanced technology such as a flybarless rotor head and a 6-axis gyroscope for enhanced stability and performance. Its compact size and impressive maneuverability make it an excellent choice for both indoor and outdoor flight. This manual provides comprehensive instructions for the safe and effective setup, operation, and maintenance of your ESKY Scale 300 V2 helicopter.

Sigurnosne mjere

Always prioritize safety when operating your RC helicopter. Failure to follow these guidelines may result in injury or damage to the product or property.

• Pročitajte priručnik: Thoroughly read and understand this entire instruction manual before operating the helicopter.
• Radno okruženje: Operate the helicopter in open, clear areas, away from people, animals, buildings, power lines, and other obstacles. Avoid flying in windy conditions.
• Preporuka za dob: This product is recommended for users aged 14 months and older. Adult supervision is advised for younger users.
• Sigurnost baterije:
  • Use only the specified LiPo battery and charger.
  • Nemojte previše puniti ili prazniti bateriju.
  • Nikada ne ostavljajte baterije za punjenje bez nadzora.
  • Store batteries in a cool, dry place, away from direct sunlight and heat sources.
  • If the battery becomes swollen, punctured, or damaged, discontinue use immediately and dispose of it properly.
• Lopatice rotora: The rotor blades spin at high speeds and can cause serious injury. Keep hands, face, and loose clothing away from the rotating blades.
• Provjera prije leta: Always perform a pre-flight check to ensure all components are securely attached and functioning correctly.
• Hitno zaustavljanje: Familiarize yourself with the throttle cut/emergency stop function on the transmitter.

Sadržaj paketa

Provjerite da li se u vašem paketu nalaze sve dolje navedene stavke:

• 1 x ESKY Scale 300 V2 Helicopter (Mode 1)
• 1 x 2.4 GHz 4-Channel Transmitter
• 1 x 2S 7.4V 320mAh LiPo Battery
• 1 x USB punjač
• 1 x Spare Main and Tail Rotor Set
• 1 x Tool Set (Screwdriver and Hex Wrench)
• 1 x Uputstvo za upotrebu

Napomena: 4 x AA batteries are required for the transmitter and are not included in the package.

Image: The ESKY Scale 300 V2 helicopter laid out with its accompanying accessories, including the transmitter, battery, charger, spare blades, and tools.

Setup

1. Punjenje baterije za let

The included 2S 7.4V 320mAh LiPo battery must be fully charged before first use. Use only the provided USB charger.

1. Connect the USB charger to a compatible USB power source (e.g., computer USB port, USB wall adapter).
2. Connect the LiPo battery to the charger. Ensure the polarity is correct.
3. The charger's indicator light will show the charging status (refer to charger's specific light indications for full charge).
4. Nakon što se baterija potpuno napuni, isključite je iz punjača. Nemojte je prepuniti.

2. Umetanje baterija odašiljača

Open the battery compartment on the back of the 2.4 GHz transmitter and insert 4 AA batteries, observing the correct polarity. Close the compartment securely.

3. Installing the Flight Battery in the Helicopter

Carefully open the battery hatch on the helicopter's fuselage. Insert the charged LiPo battery into the compartment and secure it, ensuring wires are not pinched. Connect the battery to the helicopter's power connector.

Slika: A view of the ESKY Scale 300 V2 helicopter's battery compartment, showing the LiPo battery securely placed inside.

4. Binding the Transmitter and Helicopter

Your helicopter and transmitter are typically pre-bound from the factory. If re-binding is necessary, follow these general steps:

1. Ensure the transmitter is OFF and the helicopter battery is disconnected.
2. Uključite predajnik.
3. Connect the helicopter battery. The helicopter's indicator light will flash.
4. Press and hold the bind button on the transmitter (if available) or follow the specific binding sequence outlined in the separate transmitter manual.
5. Once bound, the helicopter's indicator light will become solid.

Uputstvo za upotrebu

Provjere prije leta

• Provjerite je li baterija za let potpuno napunjena i sigurno instalirana.
• Verify transmitter batteries are installed and the transmitter is powered on.
• Check that all rotor blades (main and tail) are securely attached and free from damage.
• Confirm that the flight area is clear of obstacles, people, and animals.

Basic Flight Controls (Mode 1)

The ESKY Scale 300 V2 operates in Mode 1, where throttle and rudder are on the right stick, and elevator and aileron are on the left stick.

Take-off, Hovering, and Landing

• polijetanje: Place the helicopter on a flat, level surface. Slowly increase the throttle until the helicopter lifts off the ground. Make small, precise adjustments to maintain stability.
• lebdenje: Once airborne, adjust the throttle to maintain a constant altitude. Use the elevator and aileron sticks for minor positional corrections to keep the helicopter stable in the air.
• Slijetanje: Slowly decrease the throttle while maintaining control with the other sticks. Aim for a gentle descent onto a flat surface. Once landed, immediately reduce throttle to zero.

Posebne karakteristike

• 6-Axis Gyro Stabilization: The integrated 6-axis gyroscope provides excellent flight stability, making it easier for beginners to control.
• Anti-Panic Switch: This feature helps stabilize the helicopter if you lose control. Refer to your transmitter manual for the exact button and operation.
• Dual Rate Switch: Adjusts the sensitivity of the controls. Use lower rates for beginners for smoother, less aggressive control, and higher rates for experienced pilots for more agile maneuvers.
• LED svjetla: Bright LED lights aid in orientation during flight, especially in low-light conditions.

Image: The ESKY Scale 300 V2 helicopter, showcasing its sleek black and white fuselage and main rotor blades, ready for flight.

Održavanje

Regular maintenance ensures the longevity and optimal performance of your helicopter.

• čišćenje: After each flight, gently wipe down the helicopter with a soft, dry cloth to remove dust and debris. Avoid using water or solvents.
• Pregled lopatica rotora: Regularly inspect the main and tail rotor blades for any cracks, chips, or deformation. Replace damaged blades immediately using the provided spare set or genuine Esky parts.
• Pregled motora i zupčanika: Check the motors and gears for any signs of wear or obstruction. Ensure smooth rotation of all moving parts.
• Održavanje baterije:
  • Do not store LiPo batteries fully charged or fully discharged for extended periods. Store them at a "storage charge" (around 3.8V per cell).
  • If the helicopter will not be used for a long time, disconnect the battery from the helicopter.
• Zategnutost vijaka: Periodically check all screws and fasteners to ensure they are tight. Do not overtighten.

Slika: Detaljna view of the helicopter's flybarless rotor head assembly, showing the main rotor attachment points.

Image: A close-up shot of the helicopter's tail rotor, highlighting its design and connection to the tail boom.

Rješavanje problema

Pogledajte ovaj odjeljak za uobičajene probleme i njihova moguća rješenja.

Specifikacije

Garancija i podrška

For warranty information, technical support, or inquiries regarding spare parts, please contact the retailer or manufacturer directly. Keep your proof of purchase for any warranty claims.

You may also find support and community resources via the following links:

• Službeni račun WeChat-a
• WeChat Work Contact

Image: The retail packaging box for the ESKY Scale 300 V2 helicopter, displaying product features and QR codes for support.