GalaxyElec PM02 V3 Power Module Instruction Manual

1. Uvod

The GalaxyElec PM02 V3 Power Module is designed to provide a clean power supply to your flight controller and associated accessories, while also offering accurate current consumption and battery voltage measurements. This module is compatible with various flight controllers including APM, Pix32, Pixhawk 4, Pixhawk 4 Mini, and Durandal. It features an integrated switching regulator to deliver stable 5.2V power.

2. Proizvod je gotovview

2.1 Ključne karakteristike

• Max Input Voltage: 60V
• Max Current Sensing: 120A
• Voltage i mjerenje struje: Configured for 5V ADC
• Switching Regulator Output: 5.2V at 3A maximum
• Povezivanje: 6-position Molex cable for APM/Pix32 'PM' connector; 6-position GH cable for Pixhawk4/Pixhawk4 mini/Durandal 'PM' connector
• Provides clean power from a LiPo battery.
• Measures current consumption and battery voltage.
• Comes pre-assembled with XT60 connectors and protective shrink tubing.

2.2 Sadržaj paketa

• 1x PM02 V3 Power Module with XT60 Connectors
• 1x Molex 6 Position Connector Cable (15 cm)
• 1x GH 6 Position Connector Cable (15 cm)

3. Specifikacije

4. Vodič za postavljanje

4.1 Connecting the Power Module

1. Connect to LiPo Battery: Connect your LiPo battery (up to 12S) to the XT60 input connector on the PM02 V3 module. Ensure correct polarity.
2. Connect to Flight Controller:
   • For APM and Pix32 flight controllers, use the provided 6-position Molex cable to connect the module to the 'PM' connector on your flight controller.
   • For Pixhawk 4, Pixhawk 4 Mini, and Durandal flight controllers, use the provided 6-position GH cable to connect the module to the 'PM' connector on your flight controller.
3. Dodaci za napajanje: The PM02 V3 is designed to power the flight controller, an RC receiver, and accessories such as GPS or radio modules. It provides a regulated 5.2V at up to 3A.

Važna napomena: The PM02 V3 Power Module is ne designed to power servos. For servo power, use your aircraft's dedicated ESC/BEC (Electronic Speed Controller/Battery Eliminator Circuit).

Image: The PM02 V3 Power Module showing the XT60 connectors for battery input/output and the two signal cables (Molex and GH) for connecting to different flight controllers.

5. Uputstvo za upotrebu

Once correctly connected, the PM02 V3 Power Module will automatically provide power to your flight controller and begin transmitting voltage and current data. This data is crucial for battery monitoring and flight controller telemetry.

• Isporuka struje: The module converts the LiPo battery voltage to a stable 5.2V for your flight controller and compatible accessories.
• Telemetrija: The module continuously measures the battery's voltage and the current being drawn by the system. This information is sent to the flight controller via the connected signal cable (Molex or GH) and can be displayed in your ground station software.
• kalibracija: Za tačan voltage and current readings, it is recommended to perform a power module calibration within your flight controller's ground station software (e.g., Mission Planner, QGroundControl) after initial setup. Refer to your flight controller's specific documentation for calibration procedures.

Slika: Vrh view of the PM02 V3 Power Module, showing the main circuit board and XT60 connectors.

6. Održavanje

The PM02 V3 Power Module is designed for durability, but proper care ensures longevity and reliable performance.

• Pregledajte veze: Regularly check all cable connections (XT60, Molex, GH) to ensure they are secure and free from corrosion or damage.
• Vizuelni pregled: Periodically inspect the module and its wiring for any signs of physical damage, such as frayed wires, cracked shrink tubing, or burnt components.
• Održavajte čistoću: Ensure the module is free from dust, dirt, and moisture. Use a soft, dry brush or compressed air for cleaning if necessary.
• Skladištenje: Store the module in a dry, cool environment away from direct sunlight and extreme temperatures when not in use.

Slika: Detaljan vrh view of the PM02 V3 circuit board, showing components and wiring connections.

7. Otkrivanje problema

If you encounter issues with your PM02 V3 Power Module, consider the following troubleshooting steps:

• Nema napajanja kontrolera leta:
  • Verify that the LiPo battery is charged and correctly connected to the XT60 input.
  • Check all connections between the power module and the flight controller (Molex or GH cable) for proper seating and continuity.
  • Inspect the power module and cables for any visible damage.
• Netočna Voltage/Trenutna očitanja:
  • Ensure the power module is correctly calibrated in your flight controller's ground station software. Refer to your flight controller's manual for specific calibration steps.
  • Confirm that the correct power module type is selected in your flight controller's settings, if applicable.
• Pregrijavanje modula:
  • Ensure the current draw from your flight controller and accessories does not exceed the module's 3A output limit.
  • Verify that no servos are being powered directly by the module, as this can cause overload.

Slika: Donja strana view of the PM02 V3 Power Module, clearly showing the 'Holybro PM02 V3.0' branding.

8. Sigurnosne informacije

Always observe the following safety precautions when handling and operating the PM02 V3 Power Module:

• Ispravan polaritet: Always ensure correct polarity when connecting the LiPo battery to the power module. Incorrect polarity can cause severe damage to the module and connected components.
• Voltage Ograničenja: Nemojte prekoračiti maksimalnu ulaznu zapreminutage od 60V.
• Trenutna ograničenja: Do not exceed the maximum current sensing of 120A or the 3A output limit for the regulated 5.2V supply.
• kratki spojevi: Avoid short circuits at all times. Ensure all connections are insulated and secure.
• LiPo Battery Handling: Exercise caution when handling LiPo batteries. They can be dangerous if mishandled.
• Profesionalna instalacija: If you are unsure about any installation steps, seek assistance from an experienced professional.

9. Garancija i podrška

For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. For technical support or further inquiries, please contact the manufacturer or your authorized dealer.

Sačuvajte dokaz o kupovini za eventualne reklamacije u vezi s garancijom.