Digitus DN-10130-1

DIGITUS Gigabit Ethernet mrežna kartica - uputstvo za upotrebu

Model: DN-10130-1

Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your DIGITUS Gigabit Ethernet Network Card. This PCI Express network card is designed to equip your PC with an additional Gigabit Ethernet port, enabling high-speed data transfer up to 1000 Mbps over existing network cabling. It includes a low-profile slot panel, making it suitable for various computer chassis sizes.

DIGITUS Gigabit Ethernet Network Card

Figure 1: DIGITUS Gigabit Ethernet Network Card (Main View)
This image shows the overall view of the DIGITUS Gigabit Ethernet Network Card, highlighting its PCI Express interface and the RJ45 port.

Sadržaj paketa

Prije nego što nastavite s instalacijom, provjerite da li su sve komponente prisutne u paketu:

  • Gigabit Ethernet PCI Express mrežna kartica
  • Low Profile Slot Plate
  • Vodič za brzi početak
  • Support CD-ROM (containing drivers and utilities)
DIGITUS Network Card with Low Profile Zagrada

Figure 2: Network Card with Included Low Profile Zagrada
This image displays the network card alongside the additional low-profile bracket, which can be used for installation in smaller computer cases.

Postavljanje i instalacija

Follow these steps carefully to install your network card:

  1. Isključite i odspojite: Potpuno isključite računar i isključite kabl za napajanje iz zidne utičnice.
  2. Otvorite kućište računara: Uklonite bočnu ploču kućišta računara da biste pristupili matičnoj ploči.
  3. Pronađite PCI Express slot: Identify an available PCI Express (PCIe) slot on your motherboard. The card requires a PCIe x1 slot or larger (e.g., x4, x8, x16).
  4. Uklonite poklopac utora: Carefully remove the metal slot cover from the back of your computer case corresponding to the chosen PCIe slot. If installing in a small form factor PC, you may need to replace the standard bracket on the network card with the included low-profile zagrada.
  5. Insert Network Card: Align the network card with the PCIe slot and press it firmly and evenly until it is securely seated. Ensure the bracket is flush with the back of the case.
  6. Sigurna kartica: Secure the network card with the screw or latch mechanism provided by your computer case.
  7. Zatvori slučaj i ponovo se poveži: Replace the computer case side panel and reconnect all cables, including the power cable.
  8. Power On and Install Drivers: Power on your computer. Once the operating system loads, insert the provided Support CD-ROM to install the necessary drivers. Alternatively, you can download the latest drivers from the Digitus official webstranicu. Slijedite upute na ekranu da biste dovršili instalaciju upravljačkog programa.
PCIe Connector of Network Card

Figure 3: PCIe Connector Detail
Ova slika pruža krupni plan view of the PCI Express connector on the network card, which plugs into the motherboard.

Uputstvo za upotrebu

Once the network card is physically installed and drivers are successfully loaded, you can begin using it:

  1. Spojite Ethernet kabel: Plug a standard RJ45 Ethernet cable from your network router, switch, or modem into the RJ45 port on the newly installed network card.
  2. Potvrdite vezu: Observe the LED indicators on the RJ45 port. Typically, one LED indicates link activity (data transfer) and the other indicates connection speed (e.g., green for Gigabit, amber for 100 Mbps). Refer to the image below for LED locations.
  3. Mrežna konfiguracija: Your operating system should automatically detect the new network connection. You may need to configure network settings (e.g., IP address, DNS) if your network does not use DHCP.
  4. Testirajte povezanost: Otvori a web browser or use network diagnostic tools to confirm internet access and network connectivity.
RJ45 Port and LED Indicators

Figure 4: RJ45 Port with LED Indicators
This image shows the RJ45 Ethernet port on the network card, along with the two LED indicators that provide visual feedback on network link status and activity.

Održavanje

The DIGITUS Gigabit Ethernet Network Card is designed for reliable operation with minimal maintenance. However, consider the following:

  • Ažuriranja drajvera: Periodically check the Digitus official website for updated drivers. Keeping drivers current can improve performance and resolve compatibility issues.
  • fizicki pregled: If you experience network issues, a physical inspection of the card and cable connections can be helpful. Ensure the card is securely seated in its PCIe slot and the Ethernet cable is firmly connected.
  • Uklanjanje prašine: Over time, dust can accumulate inside your computer case. If necessary, carefully clean the area around the network card using compressed air to prevent overheating. Ensure the computer is powered off and unplugged before cleaning.

Rješavanje problema

If you encounter issues with your network card, refer to the following troubleshooting tips:

  • Nema mrežne veze:
    • Ensure the Ethernet cable is securely connected to both the network card and your router/switch.
    • Verify that the network card is properly seated in the PCIe slot.
    • Check if the network card drivers are correctly installed in your operating system's Device Manager. Reinstall drivers if necessary.
    • Test with a different Ethernet cable or port on your router/switch.
  • Mala brzina mreže:
    • Ensure your router/switch supports Gigabit Ethernet (1000 Mbps).
    • Verify that the Ethernet cable is a Cat5e or Cat6 cable, suitable for Gigabit speeds.
    • Check for updated drivers for the network card.
    • Confirm that your operating system's network settings are configured for full duplex and Gigabit speed (if applicable).
  • Problemi s instalacijom upravljačkih programa:
    • Ensure you are installing the correct drivers for your operating system version (e.g., Windows 10, 64-bit).
    • Privremeno onemogućite antivirusni softver tokom instalacije upravljačkog programa ako ometa rad sistema.
    • Try installing drivers in compatibility mode if experiencing issues on newer operating systems.

Specifikacije

FeatureDetalj
BrandDigitus
Broj modelaDN-10130-1
Hardversko sučeljePCI Express (PCIe x1), Ethernet
Data Link ProtocolGigabit Ethernet (10/100/1000 Mbps)
Brzina prijenosa podataka1000 megabita u sekundi
Kompatibilni uređajiStoni računari
ČipsetRealtek RTL8111H
Dimenzije proizvoda5.51 x 7.87 x 1.38 inča
Težina artikla0.035 unci (približno 1 grama)
BojaCrna

Garancija i podrška

DIGITUS products are designed for quality and reliability. This product comes with a standard limited warranty. Please refer to the warranty information provided on the Support CD-ROM or the official Digitus websajt za posebne uslove i odredbe.

For technical support, driver downloads, or further assistance, please visit the official Digitus support website or refer to the contact information provided in the Quick Start Guide included with your product. The included Support CD-ROM also contains drivers and additional resources.

EU Spare Part Availability Duration: 1 Year

© 2024 Digitus. Sva prava pridržana.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.