AOPUTTRIVER AP-570S-APP Bluetooth Clamp Uputstvo za upotrebu merača

1. Uvod

The AOPUTTRIVER AP-570S-APP is a portable, high-performance digital clamp meter designed for accurate measurement of various electrical parameters. This device features Bluetooth connectivity, allowing it to pair with mobile phones for data logging and analysis. It is suitable for troubleshooting electrical problems in home improvement, appliance repair, line maintenance, and car repair applications.

Image 1.1: The AP-570S-APP Clamp Meter being used in different electrical measurement scenarios, including home wiring, appliance repair, and automotive diagnostics.

2. Sigurnosne informacije

Molimo vas da pažljivo pročitate sva sigurnosna upozorenja i upute za upotrebu prije upotrebe ovog instrumenta. Nepoštivanje ovih uputa može dovesti do strujnog udara, požara ili ozbiljnih ozljeda.

• Uvijek osigurajte čistoćuamp meter is in good working condition before use. Inspect for any damage to the casing, test leads, or insulation.
• Ne koristite mjerač ako izgleda oštećeno ili ako je izolacija oštećena.
• Pridržavajte se svih lokalnih i nacionalnih sigurnosnih propisa.
• Izbjegavajte rad sami.
• Budite oprezni kada radite sa voltagiznad 30V AC RMS, 42V peak ili 60V DC. Ovi volumenitagpredstavljaju opasnost od strujnog udara.
• Always disconnect power to the circuit under test before making connections or disconnections, especially when measuring resistance, capacitance, or performing diode tests.
• The AP-570S-APP features a double insulation design for enhanced protection. However, always exercise caution.
• The Non-Contact Voltage (NCV) detection feature allows for voltage detection without direct contact, improving safety.
• Replace the battery promptly when the low battery indicator appears to ensure accurate readings and proper operation.

Slika 2.1: clamp meter with a rubber sleeve for protection against drops and emphasizing safety features like double insulation.

3. Značajke proizvoda

• Multifunction Measurement: Precizno mjeri AC/DC Voltage (600mV-1000V), AC/DC Current (600A-1000A), Resistance (600Ω-60MΩ), Capacitance (6nF-60mF), Frequency (9.999Hz-9.999MHz), Duty Cycle, Diode, and Continuity.
• Bluetooth APP Connectivity: Connects to mobile phones (Android/iOS) via Bluetooth for real-time data display, logging, and analysis using the "AiLink" app.
• Mjerenje temperature: Includes a thermocouple for temperature testing, with switchable units (℃/℉).
• Non-Contact VoltagDetekcija e (NCV): Sigurno detektuje jačinu naizmjenične strujetage without direct contact, indicated by sound and light.
• Displej sa pozadinskim osvetljenjem: Large LCD with backlight for clear readings in dark environments.
• Zadržavanje podataka: Zamrzava trenutno očitavanje na ekranu.
• Funkcija MAX/MIN: Records maximum and minimum measured values.
• REL (Relative) Mode: Measures the change in a signal relative to a stored reference value.
• Auto/Manual Ranging: Offers flexibility in measurement ranges.
• Double Insulation Design: Provides enhanced user safety.
• Automatsko isključivanje: Štedi vijek trajanja baterije.

4. Layout Introduction (Components)

Familiarize yourself with the different parts of your AOPUTTRIVER AP-570S-APP Clamp metar:

Image 4.1: Detailed diagram showing the layout and functions of the clamp meter's various parts.

1. Clamp čeljusti: Opens up to 45mm to enclose a conductor for current measurement.
2. NCV Detection Area: Prostor za beskontaktni volumentage detekcija.
3. Jaw-Opening Handle: Koristi se za otvaranje i zatvaranje clamp čeljusti.
4. Okretni prekidač: Selects measurement functions and ranges.
5. Tipka HOLD: Press to hold the current reading. Press and hold for more than 2 seconds to activate/deactivate backlight.
6. Tipka SELECT: Used to switch between functions within a rotary switch position (e.g., AC/DC voltage, diode/continuity, capacitance).
7. MAX/MIN Key: Press to display the maximum or minimum measured value. Press and hold for 2 seconds to exit.
8. REL Key: Activates relative measurement mode.
9. Hz/Duty Key: In ACV/ACA or Hz range, press to choose between Frequency (Hz) or Duty Cycle measurement.
10. LCD ekran: 6000 counts digital display with full function symbols.
11. COM ulazni priključak: Zajednički (negativni) ulaz za mjerne kablove.
12. VΩHzT+ Input Jack: Pozitivan ulaz za volumentage, resistance, frequency, temperature, and capacitance measurements.

5. Podešavanje

5.1 Instalacija baterije

The AP-570S-APP requires a 9V battery for operation. To install or replace the battery:

1. Osigurajte clamp meter is turned OFF (Rotary Switch set to OFF).
2. Pronađite poklopac odjeljka za baterije na stražnjoj strani mjerača.
3. Upotrijebite odvijač da otvorite odjeljak za baterije.
4. Spojite 9V bateriju na kontakte baterije, pazeći na ispravan polaritet.
5. Place the battery into the compartment and secure the cover.

5.2 Početno uključivanje

After battery installation, turn the Rotary Switch from OFF to any desired measurement function to power on the device. The LCD display will illuminate.

Slika 5.1: clamp meter shown with its packaging, carrying bag, test leads, thermocouple, and 9V battery.

6. Uputstvo za upotrebu

To perform measurements, rotate the Rotary Switch to the desired function. Connect test leads or use the clamp jaws as appropriate for the measurement type.

6.1 Mjerenje AC/DC struje

1. Set the Rotary Switch to the 600A~1000A pozicija.
2. Pritisnite SELECT key to switch between AC (~) and DC (—) current measurement if necessary.
3. Otvorite clamp jaws using the jaw-opening handle.
4. Enclose only one conductor with the clamp jaws. Ensure the conductor is centered within the jaws for accurate readings.
5. Očitajte trenutnu vrijednost na LCD zaslonu.

Note: For currents between 0-600A, resolution is 0.1A. For 600-1000A, resolution is 1.0A.

6.2 AC/DC Voltage Measurement

1. Set the Rotary Switch to the V— or V~ pozicija.
2. Pritisnite SELECT key to switch between AC (~) and DC (—) voltagmjerenje ako je potrebno.
3. Umetnite crni test kabl u COM priključak i crveni ispitni kabl u VΩHzT+ Jack.
4. Spojite ispitne sonde preko strujnog kola ili komponente koju treba mjeriti.
5. Pročitajte voltage vrijednost na LCD zaslonu.

6.3 Resistance, Diode, Continuity, and Capacitance Measurement

1. Set the Rotary Switch to the Ω pozicija.
2. Pritisnite SELECT key to cycle through Resistance (Ω), Diode Test (→|), Continuity Test (♫), and Capacitance (—||—) functions.
3. Umetnite crni test kabl u COM priključak i crveni ispitni kabl u VΩHzT+ Jack.
4. Connect the test probes to the component.
5. Read the value on the LCD display. For continuity, an audible beep indicates a continuous circuit.

6.4 Mjerenje frekvencije i radnog ciklusa

1. Set the Rotary Switch to the Hz pozicija.
2. Umetnite crni test kabl u COM priključak i crveni ispitni kabl u VΩHzT+ Jack.
3. Spojite ispitne sonde na izvor signala.
4. Pritisnite Hz/Duty key to switch between Frequency (Hz) and Duty Cycle (%).
5. Očitajte vrijednost na LCD displeju.

6.5 Mjerenje temperature

1. Set the Rotary Switch to the ° C / ° F pozicija.
2. Insert the thermocouple into the COM i VΩHzT+ utičnice, poštujući polaritet.
3. Postavite termoelement sondu na mjesto gdje treba mjeriti temperaturu.
4. Pritisnite SELECT key to switch between Celsius (°C) and Fahrenheit (°F).
5. Očitajte vrijednost temperature na LCD ekranu.

Slika 6.1: clamp meter displaying temperature readings in both Celsius and Fahrenheit, with a thermocouple probe immersed in water.

6.6 Non-Contact Voltage (NCV) Detekcija

1. Set the Rotary Switch to the NCV pozicija.
2. Move the NCV detection area of the meter close to the wire or conductor where voltagSumnja se na e.
3. Ako je AC voltage is detected, the meter will emit an audible beep and the NCV indicator light will illuminate.

Slika 6.2: clamp beskontaktni mjerač za detekciju volumenatage near an electrical outlet, indicated by a red glow and 'bi bi' sound representation.

6.7 Funkcija pozadinskog osvjetljenja

To activate or deactivate the backlight, press and hold the HOLD button for more than 2 seconds. The backlight improves visibility in dimly lit conditions.

Image 6.3: Comparison of the clamp meter's LCD display, showing improved readability with the backlight activated.

7. Bluetooth APP Connection

The AP-570S-APP can connect to your mobile device via Bluetooth for enhanced functionality, including data logging and analysis.

1. Preuzmite aplikaciju: Scan the QR code below or search for "AiLink" in the Google Play Store (for Android) or Apple App Store (for iOS). Download and install the application.
2. Registracija/Prijava: Open the AiLink app. You may need to register a new account or log in using an existing account (e.g., Facebook or Apple ID).
3. Povežite Clamp metar: Ensure Bluetooth is enabled on your mobile phone. In the AiLink app, press the "ADD" or "+" button to search for nearby devices. Select the clamp meter from the list to connect.
4. Start Measurement and Analysis: Kada se povežete, možete view real-time data, save measurements, and analyze them within the app. The app allows for data export (e.g., CSV files).

Image 7.1: Visual guide demonstrating the steps to download the AiLink app, log in, connect to the clamp meter, and view podaci.

Download AiLink App: https://aicare.net.cn/app/ailink/download/

8. Održavanje

• čišćenje: Regularly wipe the meter casing s oglasomamp krpa i blagi deterdžent. Ne koristite abrazive ili otapala.
• Zamjena baterije: Replace the 9V battery when the low battery indicator appears on the display. Always turn off the meter before replacing the battery.
• Skladištenje: If the meter is not used for an extended period, remove the battery to prevent leakage. Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures.
• kalibracija: For professional use, periodic calibration by a qualified technician is recommended to ensure continued accuracy.

9. Otkrivanje problema

10. Specifikacije

11. Garancija i podrška

AOPUTTRIVER products are designed for reliability and performance. For warranty information or technical support, please refer to the documentation included with your purchase or contact AOPUTTRIVER customer service directly. If you have questions about the product during daily use, please contact us for assistance.