QiCYCLE P1 Portable Air Compressor User Manual

1. Uvod

The QiCYCLE P1 is a high-performance wireless portable air compressor designed for quick and efficient inflation of various items. Equipped with a 120W high-efficiency motor, it can reach a maximum inflation pressure of 150 PSI (10.3 bar) with an airflow of up to 32L/min. This device features a built-in 7800mAh Li-ion battery, an automatic stop function, and can also serve as a 5000mAh power bank and an emergency LED flashlight. Its robust construction ensures durability and safety.

2. Sigurnosne informacije

• Prije upotrebe pažljivo pročitajte sva uputstva.
• Čuvati van domašaja djece.
• Ne koristite kompresor u vlažnim uslovima ili u blizini zapaljivih tečnosti ili gasova.
• Prije početka naduvavanja provjerite je li crijevo za zrak sigurno spojeno.
• Do not over-inflate items. Always refer to the manufacturer's recommended pressure.
• Izbjegavajte produženi neprekidni rad kako biste spriječili pregrijavanje. Ostavite uređaj da se ohladi ako se zagrije.
• Koristite samo priloženi kabel za punjenje i adaptere.
• Ne rastavljajte ili pokušavajte sami da popravite uređaj. Obratite se korisničkoj podršci za pomoć.

3. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

• 1 x QiCYCLE P1 Tire Inflator
• 1 x Air Tube (with Schrader valve)
• 1 x Presta adapter za ventil
• 1 x Adapter za kugličnu iglu
• 1 x USB-C kabel za punjenje
• 1 x Torba za pohranu
• 1 x Uputstvo za upotrebu

Image: Contents of the QiCYCLE P1 package, including the inflator, air tube, various adapters, USB-C cable, storage bag, and user manual.

4. Proizvod je gotovview

Ključne karakteristike:

• Brza inflacija: 120W motor, up to 150 PSI / 10.3 bar, 32L/min airflow. Inflates a 205/55 R16 tire from 0 to 2.5 bar in approximately 5 minutes and 52 seconds.
• Baterija velikog kapaciteta: Integrated 7800mAh (3x2600mAh) Li-ion battery for extended use. Fully charges in about 3 hours via USB-C.
• 5 Preset Modes & Automatic Stop: Includes modes for Car, Motorcycle, Bicycle, Ball, and a Manual mode. Automatically stops when the preset pressure is reached to prevent over-inflation.
• LCD Display & Real-time Monitoring: High-definition LCD shows real-time tire pressure data. Supports auto-calibration at high altitudes.
• Multifunkcionalni uređaj: Functions as a 5000mAh power bank (5V/2A USB-A output) and an emergency LED flashlight (long-duration light and SOS flashing).
• Izdržljiva konstrukcija: Features zinc alloy cast cylinders, heat-resistant PC shell, and a 350mm vulcanized rubber hose for enhanced durability and safety.

Slika: Interna view of the QiCYCLE P1, highlighting the dual integrated chips for precise control and heat dissipation.

5. Podešavanje

5.1 Punjenje uređaja

1. Connect the provided USB-C charging cable to the charging port on the QiCYCLE P1.
2. Connect the other end of the USB-C cable to a compatible USB power adapter (not included) or a power source.
3. The battery indicator on the LCD screen will show the charging status. A full charge typically takes about 3 hours.
4. Preporučuje se da se uređaj u potpunosti napuni prije prve upotrebe.

5.2 Pričvršćivanje crijeva za zrak i adaptera

1. Screw the air tube securely onto the inflation port at the top of the compressor.
2. For Schrader valves (common on cars, motorcycles, and some bicycles), the air tube can be directly connected.
3. For Presta valves (common on road bikes), screw the Presta valve adapter onto the Presta valve, then attach the air tube to the adapter.
4. For balls, screw the ball needle adapter onto the air tube, then insert the needle into the ball's valve.

6. Uputstvo za upotrebu

6.1 Uključivanje/isključivanje

• Za uključivanje: Pritisnite i držite dugme za napajanje (U) na 2 sekunde.
• Za isključivanje: Pritisnite i držite dugme za napajanje (U) for 2 seconds. The device will also automatically power off after a period of inactivity.

6.2 Odabir načina napuhavanja

The QiCYCLE P1 offers 5 preset inflation modes:

1. With the device powered on, press the mode button (M) to cycle through the available modes: Car, Motorcycle, Bicycle, Ball, and Manual.
2. Each mode has a default pressure range. The manual mode allows for custom pressure settings from 3-150 PSI.

Image: Display showing the 5 preset inflation modes: Car (1.8-3.5 bar), Motorcycle (1.8-3.0 bar), Bicycle (30-145 PSI), Ball (4-16 PSI), and Manual (3-150 PSI).

6.3 Postavljanje ciljnog pritiska

• After selecting a mode, use the '+' and '-' buttons to adjust the target pressure.
• Press the 'U' button briefly to switch between pressure units (PSI, BAR, KPA).
• In Manual mode, the device remembers your last set pressure.

6.4 Pokretanje i zaustavljanje inflacije

1. Remove the valve cap and securely connect the air tube to the item's valve.
2. Select the desired mode and set the target pressure.
3. Pritisnite dugme za napajanje (U) to start inflation. The real-time pressure will be displayed.
4. Kompresor će se automatski zaustaviti kada se dostigne ciljani pritisak.
5. To manually stop inflation, press the power button (U) ponovo.
6. Carefully disconnect the air tube from the valve.

Image: Step-by-step guide for inflation: 1) Remove valve cap and connect, 2) Select mode and set pressure, 3) Press power button to start inflation.

6.5 Funkcija prenosne baterije

• The QiCYCLE P1 can act as a 5000mAh power bank.
• Connect your mobile device or other USB-powered gadget to the USB-A output port (5V/2A) on the compressor using a compatible USB cable.
• The device will begin charging your external device.

Image: The QiCYCLE P1 being used as a power bank to charge a smartphone via its USB-A output port.

6.6 LED Flashlight Function

• Press the flashlight button (light bulb icon) to turn on the LED light.
• Press again to cycle through different light modes (e.g., steady light, SOS flashing).
• Press a third time to turn off the LED light.

7. Održavanje

• Održavanje baterije: If the device is not used for an extended period, it is recommended to recharge the battery every six months to maintain its performance and prolong its lifespan.
• čišćenje: Obrišite vanjski dio kompresora mekom, suhom krpom. Ne koristite jake hemikalije ili abrazivna sredstva za čišćenje.
• Skladištenje: Store the compressor in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided storage bag to protect it from dust and damage.
• Pregled crijeva: Regularly inspect the air hose for any signs of wear, cracks, or damage. Replace if necessary.

8. Otkrivanje problema

9. Specifikacije

10. Garancija i podrška

10.1 Informacije o garanciji

QiCYCLE products come with a 12-month worry-free warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

10.2 Korisnička podrška

For any questions, suggestions, or technical assistance, please do not hesitate to contact our customer service team. We offer 7x24 hour pre-sales and after-sales support.

Kontakt informacije:

• Email: support@qicycle.com
• Telefon: +86 199 2515 4063