PowerSmart 42V 2A Charger for 36V Batteries User Manual

1. Uvod

This manual provides essential information for the safe and efficient use of your PowerSmart 42V 2A charger. This charger is specifically designed for 36V batteries equipped with a 5-pin SVD plastic connector, commonly found in Phylion and Joycube battery systems. Please read these instructions carefully before operating the charger to ensure proper function and to prevent damage or injury.

2. Važna sigurnosna uputstva

• Pročitajte sva uputstva: Prije korištenja punjača, pročitajte sva uputstva i oznake upozorenja na punjaču, bateriji i proizvodu koji koristi bateriju.
• Samo u zatvorenom: Do not expose the charger to rain or wet conditions. It is designed for indoor use only.
• Proper voltage: Ensure the charger is connected to a power supply within the specified input voltage range (100V-240V AC).
• Correct connector: This charger is only compatible with 36V batteries that have a 5-pin plastic SVD connector. Do not attempt to use it with metal connectors or other pin configurations.
• Izbjegavajte kratke spojeve: Do not short-circuit the output terminals.
• ventilacija: Osigurajte odgovarajuću ventilaciju oko punjača tokom rada. Ne prekrivajte punjač.
• Isključite kada nije u upotrebi: Isključite punjač iz utičnice kada ga ne koristite ili prije čišćenja.
• Oštećene komponente: Do not operate the charger if it has been dropped, damaged, or if the cord or plug is damaged. Contact customer support for assistance.
• Djeca i kućni ljubimci: Čuvajte punjač van domašaja dece i kućnih ljubimaca.

3. Značajke proizvoda

• Kompatibilnost: Specifically designed for 36V batteries with a 5-pin plastic SVD connector.
• Ulazni voltage: 100V-240V AC, 50/60Hz.
• Output Voltage: 42V DC.
• Izlazna struja: 2.0A.
• Izlazna snaga: 84W.
• Tip konektora: 5-pin circular plastic plug.
• LED indikator: Red for charging, Green for fully charged or disconnected.

4. Setup and Connector Verification

Before connecting the charger, it is crucial to verify that your battery's charging port is compatible with the 5-pin plastic SVD connector. This charger is not compatible with metal plugs or other pin configurations.

Image: Ensure your battery has a plastic 5-pin DC socket, not a metal one.

The charger features a 5-pin circular plastic connector. Please compare it carefully with your battery's charging port.

Image: PowerSmart 42V 2A charger with its 5-pin plastic connector.

This charger is specifically designed for Phylion and Joycube 36V batteries that utilize this specific 5-pin SVD plastic connector.

Image: Correct connection of the 5-pin charger plug.

Napomena: This charger is not compatible with NEOMOUV brand bikes fitted with Greenway 36V batteries, nor can it replace chargers with model numbers SHC-8100LC, STC-8129LC, and LBC100201.

5. Upute za upotrebu (Proces punjenja)

1. Povežite se s baterijom: First, connect the 5-pin charger plug securely into the charging port of your 36V battery.
2. Povežite se na napajanje: Plug the charger's AC power cord into a standard 100V-240V wall outlet.
3. LED indikator monitora:
   • A RED LED light indicates that the battery is currently charging.
   • A ZELENI LED light indicates that the battery is fully charged or the charger is disconnected from the battery.
4. Vrijeme punjenja: Charging time will vary depending on the battery's capacity and its current charge level.
5. Prekini vezu: Once the LED indicator turns green, the battery is fully charged. Disconnect the charger from the wall outlet first, then disconnect the charger plug from the battery.

Important Note on Voltage: The charger's output voltage (42V) is intentionally higher than the battery's nominal voltage (36V). This is normal and necessary for a complete charge cycle. Do not be alarmed by this difference.

Image: Charger output voltage je veći od zapremine baterijetage for full charge.

6. Održavanje

• čišćenje: Disconnect the charger from the power supply and battery before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Skladištenje: Store the charger in a cool, dry place when not in use. Avoid extreme temperatures and humidity.
• Održavanje kablova: Do not pull the cable forcefully or wrap it too tightly around the charger. Inspect the cable and plug regularly for any signs of damage.

7. Otkrivanje problema

If the charger is not functioning as expected, please check the following:

• Nema LED svjetla:
  • Provjerite je li punjač sigurno uključen u ispravnu zidnu utičnicu.
  • Verify the battery is properly connected to the charger.
  • Provjerite da li zidna utičnica radi tako što ćete uključiti drugi uređaj.
• LED remains green when connected to battery:
  • Baterija je možda već potpuno napunjena.
  • Ensure the battery's charging port and the charger's plug are clean and free of debris.
  • Confirm that the battery is a 36V battery with a 5-pin plastic SVD connector.
• Charger gets warm during use:
  • It is normal for the charger to become warm during operation. Ensure it has adequate ventilation and is not covered.
  • If the charger becomes excessively hot or emits smoke/unusual odors, immediately disconnect it from power and battery and cease use.

If these steps do not resolve the issue, please contact PowerSmart customer support.

8. Specifikacije

Image: Charger label with detailed specifications.

9. Garancija i podrška

For warranty information or technical support, please refer to the documentation included with your purchase or contact PowerSmart customer service directly. Please have your product model number (42V 2A or SSLC084V42M-01) and purchase details available when contacting support.

Manufacturer: PowerSmart
Address: ID, 6F, Ren Road, Donggang Town, Xichen District, Wuxi City, Jiangsu P.R. China