Segotep Lux-S Mid-Tower Gaming PC Case Instruction Manual

1. Uvod

Thank you for choosing the Segotep Lux-S Mid-Tower Gaming PC Case. This manual provides essential information for the proper assembly, installation, and maintenance of your new PC case. Please read these instructions carefully before beginning the installation process to ensure optimal performance and longevity of your components.

2. Sigurnosne informacije

• Uvijek isključite napajanje iz zidne utičnice prije instaliranja ili uklanjanja bilo kakvih komponenti.
• Pažljivo rukujte svim komponentama kako biste spriječili oštećenja uzrokovana statičkim elektricitetom. Razmislite o upotrebi antistatičke narukvice.
• Be cautious of sharp edges inside the case.
• Držite male dijelove i vijke dalje od djece.
• Ensure proper ventilation around the assembled PC to prevent overheating.

3. Sadržaj paketa

Molimo Vas da provjerite da li se u Vašem paketu nalaze svi artikli:

• Segotep Lux-S Mid-Tower PC Case
• 3 x 120mm Front Fans (pre-installed)
• Kutija s priborom (sadrži vijke, odstojnike, vezice za kablove itd.)
• Korisnički priručnik (ovaj dokument)

4. Proizvod je gotovview

The Segotep Lux-S is a stylish mid-tower gaming case featuring a full crystal-style design and transparent tempered glass side panels for showcasing your build. It is designed for efficient airflow and easy component installation.

Ključne karakteristike:

• Podrška za matičnu ploču: Compatible with ATX, Micro-ATX, and ITX motherboards.
• hlađenje: Includes three pre-installed 120mm front fans. Supports additional fans and air cooling solutions.
• Filtracija prašine: Equipped with a magnetic anti-dust mesh on the top panel.
• Skladištenje: Supports two 3.5" HDDs or one 3.5" HDD and one 2.5" SSD.
• bočne ploče: Tempered glass side panels for an aesthetic view unutrašnjih komponenti.

Slika 4.1: Prednja strana view of the Segotep Lux-S PC Case, highlighting the RGB fans and tempered glass panel.

Slika 4.2: Od vrha prema dolje view of the case, illustrating the magnetic dust filter on the top panel and the front I/O ports.

Figure 4.3: Interior layout of the Segotep Lux-S, detailing the motherboard mounting area, cable routing cutouts, and drive bay locations.

5. Postavljanje i instalacija

5.1 Uklanjanje bočnih panela

Carefully remove the tempered glass side panel(s) by unscrewing the thumb screws located at the rear of the case. Place the panels on a soft, flat surface to prevent scratches.

5.2 Instalacija matične ploče

1. Instalirajte I/O štitnik koji je došao s vašom matičnom pločom u stražnji otvor kućišta.
2. Align your ATX, Micro-ATX, or ITX motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor.
3. Pričvrstite matičnu ploču odgovarajućim vijcima iz kutije s priborom.

5.3 Instalacija jedinice za napajanje (PSU).

Install your PSU into the dedicated compartment at the bottom rear of the case. Secure it with screws from the accessory box.

5.4 Instalacija diska za pohranu podataka

• 3.5" tvrdi diskovi: Locate the drive cage at the bottom of the case. Slide the HDDs into the trays and secure them with screws. The case supports up to two 3.5" HDDs.
• 2.5" SSD diskovi: SSDs can be mounted on designated brackets, typically behind the motherboard tray or within the HDD cage. Secure with screws. The case supports one 2.5" SSD if one 3.5" HDD is used.

5.5 Grafička kartica i kartice za proširenje

Remove the necessary PCIe slot covers at the rear of the case. Insert your graphics card or other expansion cards into the motherboard's PCIe slots and secure them with screws.

5.6 Upravljanje kablovima

Koristite izreze za usmjeravanje kablova i tačke za vezivanje iza ležišta matične ploče za upravljanje kablovima. Ovo poboljšava protok vazduha i estetiku.

5.7 Connecting Front I/O and Fan Cables

Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Connect the pre-installed 120mm front fans to your motherboard's fan headers or a fan controller, if applicable.

6. Uputstvo za upotrebu

After all components are securely installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front panel to start your computer.

Slika 6.1: Krupni plan view of the three 120mm RGB fans pre-installed at the front of the Segotep Lux-S case.

Fan and Lighting Control:

The pre-installed fans may have RGB lighting. Depending on your motherboard and fan connections, you may be able to control the fan speed and lighting effects through your motherboard's software or a dedicated controller (if included or purchased separately).

7. Održavanje

• Čišćenje filtera za prašinu: The top panel features a magnetic dust filter. Regularly remove and clean it with water or a soft brush to maintain optimal airflow and prevent dust buildup inside the case.
• Generalno čišćenje: Koristite meku, damp cloth to clean the exterior of the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.
• Uklanjanje unutrašnje prašine: Periodically open the case and use compressed air to remove dust from internal components, especially heatsinks and fans.

8. Otkrivanje problema

8.1 Computer Does Not Power On

• Provjerite je li kabel za napajanje sigurno spojen i na PSU i na zidnu utičnicu.
• Check that the PSU switch is in the 'ON' position.
• Provjerite je li kabel prekidača za napajanje na prednjoj ploči ispravno spojen na priključak matične ploče.
• Confirm all internal power cables (24-pin ATX, 8-pin CPU, PCIe power) are properly seated.

8.2 Fans Not Spinning / RGB Not Lighting Up

• Check that fan power cables are securely connected to the motherboard or fan controller.
• Ensure RGB cables (if separate) are connected to the appropriate RGB headers on the motherboard or controller.
• Consult your motherboard manual for proper fan and RGB header connections and software control.

8.3 Problemi s pregrijavanjem

• Ensure all case fans are operating correctly and oriented for optimal airflow (intake/exhaust).
• Clean dust filters and internal components regularly.
• Provjerite da li ventilatori za CPU i GPU ispravno funkcionišu.

9. Specifikacije

10. Garancija i podrška

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Segotep webSačuvajte dokaz o kupovini za slučaj reklamacije.

If you encounter any issues not covered in this manual, please contact Segotep customer support for assistance.