HaiweiTech HHD-101 4K Video Audio Decoder User Manual

1. Uvod

The HaiweiTech HHD-101 is a versatile H.265/H.264 4K Video Audio Decoder designed for various professional applications, including advertisement displays, video encoding, and IP camera decoding. It supports a wide range of IP protocols such as RTMP, RTSP, RTP, HTTP, HLS, and UDP, and offers both HDMI (up to 4K@30FPS) and CVBS/BNC outputs. This manual provides comprehensive instructions for the setup, operation, and maintenance of your HHD-101 decoder.

2. Sigurnosne informacije

• Ensure the device is powered by a 12V 2A power supply. Using an incorrect power supply may damage the unit.
• Ne izlažite uređaj vodi, vlazi ili ekstremnim temperaturama.
• Izbjegavajte postavljanje uređaja na direktnu sunčevu svjetlost ili blizu izvora topline.
• Ne pokušavajte sami otvarati ili popravljati uređaj. Za sve servisne radove obratite se kvalifikovanom osoblju.
• Osigurajte odgovarajuću ventilaciju oko uređaja kako biste spriječili pregrijavanje.
• Isključite uređaj iz struje prije čišćenja ili premještanja.

3. Sadržaj paketa

Please check the package contents upon unpacking. If any items are missing or damaged, contact your vendor immediately.

• HaiweiTech HHD-101 Decoder Unit
• 12V adapter za napajanje
• Korisnički priručnik (ovaj dokument)

4. Proizvod je gotovview

Familiarize yourself with the various ports and indicators on the HHD-101 decoder.

Slika 4.1: Prednja ploča iznadview of HHD-101 Decoder.

Slika 4.2: Zadnja ploča iznadview of HHD-101 Decoder.

Figure 4.3: Detailed Port Diagram and Descriptions.

Opisi luka:

1. LAN (Ethernet port): Used for network connection. Configuration of the IP gateway may be required for normal operation.
2. LED indikatori:
   • Red: Power ON
   • Green: Network activity
3. RST (Resetovanje): Press and hold the RST button until the green LED light turns off to reset the device.
4. AV OUT (CVBS out): Kompozitni video izlaz.
5. HDMI OUT (HDMI out): High-Definition Multimedia Interface output.
6. BNC OUT (BNC out): BNC konektor za video izlaz.
7. RS485: Serial communication port (GEN, IO-1, IO-2, 485A, 485B).
8. Napajanje: 12V 2A DC power input.

5. Podešavanje

Follow these steps to set up your HHD-101 decoder:

1. Priključite napajanje: Connect the provided 12V 2A power adapter to the "Power In" port (8) on the rear panel of the decoder. Plug the adapter into a power outlet. The red LED indicator should illuminate.
2. Mrežna veza: Connect an Ethernet cable from your network router or switch to the "LAN" port (1) on the front panel. The green LED indicator should illuminate, indicating network activity.
3. Video Output Connection:
   • For HDMI output: Connect an HDMI cable from the "HDMI OUT" port (5) to your display device (e.g., TV, monitor).
   • For CVBS/BNC output: Connect a BNC cable from the "BNC OUT" port (6) or an AV cable from the "AV OUT" port (4) to your display device.
4. Audio Output (if applicable): If using AV OUT, audio will be carried through the composite cable. For HDMI, audio is embedded in the HDMI signal.
5. RS485 priključak (opciono): If required for control or data transmission, connect your RS485 devices to the RS485 terminal block (7).

Once all connections are made, the device is ready for configuration and operation.

6. Uputstvo za upotrebu

The HHD-101 decoder is designed to receive and decode various IP video streams. Operation typically involves configuring the decoder via its web interface to receive the desired stream.

6.1. Pristup Web Interface

1. Ensure the decoder is connected to your network as described in the Setup section.
2. Find the IP address of the decoder. This can often be done using a network scanning tool or by checking your router's connected devices list. The default IP address is typically provided in the separate software utility or quick start guide.
3. Otvori a web pretraživač na računaru povezanom na istu mrežu.
4. Enter the decoder's IP address into the browser's address bar and press Enter.
5. Log in using the default username and password (refer to the quick start guide or contact support if unknown).

6.2. Configuring IP Stream Decoding

U okviru web interface, you will find options to configure the input stream. The HHD-101 supports multiple protocols:

Figure 6.1: Supported IP Protocols for HHD-101 Decoder.

• Navigate to the "Input Settings" or "Stream Configuration" section.
• Select the desired protocol (e.g., RTMP, RTSP, HLS, UDP).
• Enter the source IP address or URL of the video stream you wish to decode.
• Configure any additional parameters such as port numbers, authentication credentials, or specific stream IDs as required by your source.
• Save the settings. The decoder should begin receiving and outputting the video stream to the connected display.

6.3. Multi-View Dekodiranje

The HHD-101 supports decoding up to 4 channels for multi-view display. Consult the web interface documentation for specific instructions on configuring multi-view layouts and switching between sources.

6.4. Proprietary Protocol (P-P)

For ultra-low latency point-to-point transmission, the HHD-101 decoder can be used with Haiwei proprietary protocol encoders. This solution is available only when using both HaiweiTech encoders and decoders.

Figure 6.2: Typical System Diagram with HaiweiTech Encoder and Decoder.

7. Održavanje

• čišćenje: Za čišćenje vanjske strane uređaja koristite meku, suhu krpu. Ne koristite tekuća sredstva za čišćenje ili aerosole.
• ventilacija: Ensure the ventilation slots are clear of dust and obstructions to maintain proper airflow.
• Ažuriranja firmvera: Periodically check the HaiweiTech website or contact support for available firmware updates to ensure optimal performance and access to new features.
• Skladištenje: Ako uređaj skladištite duži period, isključite ga iz struje i čuvajte ga na hladnom i suhom mjestu.

8. Otkrivanje problema

9. Specifikacije

10. Garancija i podrška

For warranty information, please refer to the documentation provided at the time of purchase or visit the official HaiweiTech website. For technical support, additional manufacturing services (SDK/API, IP finder/Video management platform/IOS Android APP), solution analysis, or OEM services, please contact HaiweiTech directly. Contact details are typically available on the manufacturer's website or through your vendor.

Note: Haiwei proprietary protocol based ultra low latency point to point transmission solution is available with the decoder only. Additional manufacturing Services:SDK/API,IP finder/Video management platform/IOS Android APP,Solution analyze,OEM(more detail:hansen(at)hwsxtec(.)com)