BSIDE S11 Smart Digital Multimeter Instruction Manual

1. prekoview

The BSIDE S11 Smart Digital Multimeter is a versatile and user-friendly tool designed for electricians and beginners. It features an EBTN color display that shows three test results simultaneously: test value, analog bars, and hertz/room temperature. This multimeter automatically identifies the parameters being tested and selects the required range, simplifying operation. It supports measurements for AC/DC voltage, resistance, frequency, capacitance, diode, continuity, and duty cycle. Additionally, it includes V-Alert (NCV) for non-contact voltage detection and live wire checking with a single probe.

Ključne karakteristike:

• Smart Režim: Automatski mjeri AC/DC jačinutage, otpor i kontinuitet.
• LCD ekran u boji: 3.5-inch EBTN display for enhanced readability in various lighting conditions.
• 3 Prikaz rezultata: Shows test value, analog bars, and frequency/temperature concurrently.
• Punjiva: Built-in 800mAh Li-ion battery with USB-C charging.
• Zaštitna torbica: Durable case for protection against shocks, friction, and bumps.
• NCV funkcija: Beskontaktni voltage detection with audible alerts.
• Provjera žice pod naponom: Identifies live wires using a single probe.
• Automatic Range & Power Off: Enhances ease of use and battery life.
• Zadržavanje podataka: Freezes the displayed measurement for convenient recording.

2. Šta se nalazi u kutiji

Upon opening your BSIDE S11 Smart Digital Multimeter package, you will find the following items:

• 1 x BSIDE S11 Smart Digital Multimeter
• 1 x Par mjernih kabela (crveni i crni)
• 1 x Zaštitna torbica
• 1 x USB-C kabel za punjenje
• 1 x engleski priručnik za upotrebu

Slika 2.1: BSIDE S11 multimetar i priložena dodatna oprema.

3. Podešavanje

3.1 Početno punjenje

The BSIDE S11 Multimeter is equipped with a built-in 3.7V rechargeable Li-ion battery. Before first use, it is recommended to fully charge the device. Use the provided USB-C charging cable to connect the multimeter to a standard USB power source (e.g., computer, wall adapter). The charging indicator light will typically show the charging status.

Figure 3.1: BSIDE S11 Multimeter being charged via USB-C cable.

3.2 Spajanje mjernih kabela

Insert the red test lead into the 'INPUT' jack and the black test lead into the 'COM' (common) jack on the bottom of the multimeter. Ensure they are securely connected. The test leads come with protective caps; remove them before use and replace them for storage.

Figure 3.2: Correct connection of test leads to the multimeter.

3.3 Uključivanje/isključivanje

Press and hold the power button (usually located on the top or side) for approximately 2 seconds to turn the multimeter on or off. The device features an automatic power-off function to conserve battery life if inactive for a period.

4. Uputstvo za upotrebu

The BSIDE S11 operates primarily in Smart Mode, automatically detecting the measurement type. You can also manually select functions using the 'FUNC' button.

Figure 4.1: Multimeter in Smart 'AUTO' mode with function indicators.

4.1 AC/DC Voltage Measurement

In Smart Mode, the multimeter will automatically detect and measure AC or DC voltage. Spojite mjerne kablove preko strujnog kola ili komponente koju želite izmjeriti. Na ekranu će se prikazati jačina zvukatage value, frequency (for AC), and an analog bar graph.

Slika 4.2: Prample of 3-result display during voltage mjerenje.

Slika 4.3: Mjerenje DC voltažetage u automobilskoj primjeni.

4.2 Mjerenje otpora

To measure resistance, ensure the circuit is de-energized. Place the test leads across the component. The multimeter will automatically switch to resistance mode and display the value in Ohms (Ω), kilo-Ohms (kΩ), or mega-Ohms (MΩ).

4.3 Mjerenje kapaciteta

For capacitance measurements, ensure the capacitor is discharged before testing. Connect the test leads to the capacitor terminals. The display will show the capacitance value in nano-Farads (nF), micro-Farads (µF), or milli-Farads (mF).

Figure 4.4: Measuring capacitance in an electronic maintenance scenario.

4.4 Ispitivanje diode

Select the diode test function (if not in Smart Mode). Connect the red lead to the anode and the black lead to the cathode of the diode. The display will show the forward voltagPad e. Zamijenite mjesta provodnicima kako biste provjerili indikaciju otvorenog strujnog kruga (OL).

4.5 Test kontinuiteta

For continuity testing, ensure the circuit is de-energized. Touch the test leads to the two points you want to check. If the resistance is less than 30Ω, an audible beep will sound, indicating continuity.

4.6 Frekvencija i radni ciklus

The multimeter can measure frequency (Hz) and duty cycle (%). These measurements are often displayed alongside voltage in Smart Mode or can be selected manually.

4.7 V-Alert (NCV) and Live Wire Detection

The NCV function detects non-contact voltage. Bring the top of the multimeter near an AC voltage source. The device will beep and the display will show a V-Alert indication. For live wire checking, use a single probe to identify live conductors; the LCD screen will light up and an audible beep will sound.

5. Održavanje

5.1 Čišćenje

Za čišćenje multimetra koristite meku,amp krpu. Ne koristite abrazivna sredstva za čišćenje ili rastvarače. Prije čišćenja provjerite je li uređaj isključen iz strujnog kruga i odvojen od svih strujnih krugova.

5.2 Njega baterija

The built-in Li-ion battery should be charged regularly to maintain its performance. Avoid completely draining the battery frequently. Store the multimeter in a cool, dry place when not in use for extended periods.

5.3 Zaštitna torbica

Always use the provided durable protective case to shield the multimeter from physical damage, such as shocks, friction, and bumps. The case is detachable for convenience.

Figure 5.1: BSIDE S11 Multimeter with its protective case.

6. Otkrivanje problema

• Nema ekrana/napajanja: Ensure the battery is charged. Press and hold the power button for 2 seconds. If the issue persists, try charging the device for a longer period.
• Netačna očitavanja: Verify that the test leads are correctly inserted and making good contact with the circuit/component. Ensure the correct measurement mode is selected if not using Smart Mode. Check for low battery indication.
• Indikacija 'OL': 'OL' (Overload) indicates that the measured value is outside the device's range or there is an open circuit.
• Nema zvučnog signala kontinuiteta: Provjerite da li je strujno kolo bez napona. Provjerite da li je otpor iznad 30Ω.
• Device Beeps Continuously (NCV): The device is highly sensitive to electrical fields. Keep it away from batteries or voltage panels when not actively using the NCV function to avoid false positives.

7. Specifikacije

8. Jamstvo i podrška

Za informacije o garanciji i tehničkoj podršci, molimo pogledajte kontakt podatke koje ste dobili uz kupovinu ili posjetite službenu BSIDE stranicu. website. Additional instructions in French may be available via email upon request.